BN-LINK Raqamli haroratni boshqarish moslamasi T9 foydalanuvchi qo'llanmasi

1. Kirish

Thank you for choosing the BN-LINK Digital Temperature Controller T9. This device is designed to precisely control temperature for various applications requiring both heating and cooling, such as reptile enclosures, aquariums, home brewing, seed germination, and fermentation. This manual provides detailed instructions for safe operation, setup, and maintenance to ensure optimal performance.

2. Mahsulot tugadiview

The BN-LINK T9 features a clear digital display, intuitive controls, and dual outlets for simultaneous heating and cooling device management. It includes a waterproof temperature probe for accurate readings.

2.1-rasm: Old view of the BN-LINK Digital Temperature Controller T9, showing the digital display, control buttons, and power cord.

2.1 ta asosiy komponentlar

• Raqamli displey: Shows current temperature and set temperature.
• Boshqarish tugmalari: POWER, UP, DOWN, CF/ST (Celsius/Fahrenheit/Status), SET, CLR (Clear).
• Heating Outlet: Controls the heating device.
• Cooling Outlet: Controls the cooling device.
• Harorat tekshiruvi: Waterproof sensor for accurate temperature measurement.

Image 2.2: Close-up of the controller's digital display and control buttons, highlighting the Heating and Cooling indicator lights.

Image 2.3: Close-up of the side of the controller, showing the clearly labeled Heating and Cooling three-prong outlets.

3. Xavfsizlik ma'lumotlari

Please read and understand all safety instructions before using this device. Failure to follow these instructions may result in electric shock, fire, or property damage.

• Ensure the total load connected to the controller does not exceed 15A/1875W.
• Ushbu qurilma faqat bino ichida foydalanish uchun mo'ljallangan.
• Do not immerse the controller unit in water or expose it to excessive moisture. The probe is waterproof, but the main unit is not.
• Always plug the controller into a grounded 125VAC 60Hz outlet.
• Qurilmani qismlarga ajratmang yoki o'zgartirmang.
• Bolalar qo'li etmaydigan joyda saqlang.
• In case of an overload, the power output and screen display will automatically cut off for protection.

Image 3.1: Diagram illustrating the overload protection feature and the independent control of heating and cooling devices.

4. Paket tarkibi

• 1 x BN-LINK Digital Temperature Controller T9
• 1 x Waterproof Temperature Probe (71 inch / 1.8m cord)
• 1 x foydalanuvchi qo'llanmasi

5. Sozlash

Follow these steps to set up your temperature controller:

1. Connect the Temperature Probe: Insert the waterproof temperature probe into the designated port on the side of the controller. Ensure it is securely connected.
2. Zondni joylashtiring: Place the temperature probe in the environment where you need to monitor and control the temperature. For liquids, ensure the probe tip is fully submerged. For air, position it away from direct heat or cold sources. The probe includes a suction cup for easy placement.


Image 5.1: The waterproof temperature probe with its suction cup for secure placement.

3. Plug in Devices: Connect your heating device (e.g., heat mat, heater) to the outlet labeled 'HEATING' and your cooling device (e.g., fan, chiller) to the outlet labeled 'COOLING'.
4. Yoqilgan: Plug the controller's power cord into a standard 125VAC 60Hz electrical outlet. The display will illuminate, showing the current temperature.


Image 5.2: The BN-LINK T9 controller mounted on a wall, demonstrating its keyhole mounting feature for convenient placement.

6. Foydalanish bo'yicha ko'rsatmalar

The controller allows you to set a target temperature and define temperature differentials for both heating and cooling.

6.1 Tugma funksiyalari

• KUCH: Jihozni yoqadi yoki o'chiradi.
• YUQORIGA (▲): Qiymatlarni oshiradi yoki opsiyalarni aylantiradi.
• DOWN (▼): Qiymatlarni kamaytiradi yoki opsiyalarni aylantiradi.
• CF/ST: Toggles between Celsius and Fahrenheit display. Press and hold to view status parameters.
• O'rnatish: Enters setting mode or confirms a selection.
• CLR: Clears current settings or exits setting mode without saving changes.

6.2 Setting Temperature Unit (°C/°F)

ni bosing CF/ST button once to switch between Celsius (°C) and Fahrenheit (°F).

6.3 Setting Target Temperature (SV)

1. ni bosing SET button once. The 'SV' (Set Value) will flash on the display.
2. dan foydalaning UP or PASTGA kerakli haroratni sozlash uchun tugmalar.
3. bosing SET again to confirm and save the setting.

6.4 Advanced Settings (Differentials and Delay)

These settings allow you to customize how the heating and cooling cycles operate to prevent rapid cycling and maintain stable temperatures.

1. ni bosing va ushlab turing SET button for 3 seconds to enter advanced settings. The display will show 'Hd' (Heating Differential).
2. Foydalanish UP or PASTGA to adjust the value for the current parameter.
3. bosing SET to move to the next parameter. The parameters are:
• Hd (Heating Differential): The temperature difference below the Set Value (SV) at which the heating device will turn on. For example, if SV is 70°F and Hd is 2°F, heating turns on at 68°F.
• Cd (Cooling Differential): The temperature difference above the Set Value (SV) at which the cooling device will turn on. For example, if SV is 70°F and Cd is 2°F, cooling turns on at 72°F.
• PT (Protection Time Delay): A delay (in minutes) before the heating or cooling output activates after the temperature crosses the threshold. This prevents short cycling of compressors or heaters.
4. After adjusting all desired parameters, press SET to cycle through them until the display returns to normal operation, or press CLR o'zgarishlarni saqlamasdan chiqish.

7. Xizmat ko'rsatish

Proper maintenance ensures the longevity and accuracy of your BN-LINK T9 controller.

• Tozalash: Wipe the controller unit with a dry, soft cloth. Do not use abrasive cleaners or immerse the unit in water.
• Probni parvarish qilish: Regularly inspect the temperature probe for any signs of damage or corrosion. Clean the probe tip gently if residue builds up, especially in aquatic or humid environments.
• Saqlash: Ishlatilmayotganda, nazorat moslamasini to'g'ridan-to'g'ri quyosh nuri va haddan tashqari haroratdan uzoqda, salqin va quruq joyda saqlang.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your BN-LINK T9 controller, refer to the following common problems and solutions:

9. Texnik shartlar

Image 9.1: Diagram showing the physical dimensions of the controller and the lengths of the power cord and sensor cable.

10. Kafolat va qo'llab-quvvatlash

BN-LINK products are designed for reliability and performance. For warranty information or technical support, please refer to the official BN-LINK websayt yoki mijozlarga xizmat ko'rsatish bilan bog'laning. Kafolat da'volari uchun xarid kvitansiyasini saqlang.

Qo'shimcha ma'lumot olish uchun tashrif buyuring BN-LINK do'koni.