1. Kirish
Thank you for choosing the NORDRIVE N60050 Roof Box Wall Mounts. These telescopic and foldable wall mounts are designed to provide a convenient and space-saving storage solution for your roof box when not in use. Please read this manual carefully before installation and use to ensure proper setup and safe operation.
Image 1.1: Assembled NORDRIVE N60050 Roof Box Wall Mounts, showing the two U-shaped supports extending from wall plates.
2. Xavfsizlik ma'lumotlari
- Ensure the wall chosen for installation is structurally sound and capable of supporting the weight of the mounts and the roof box.
- Use appropriate tools and follow all installation steps carefully.
- Always secure the roof box properly on the mounts to prevent accidental falls.
- Keep children and pets away from the installation area and the stored roof box.
- Do not exceed the maximum weight capacity of the mounts (consult product specifications if available, otherwise assume standard roof box weight).
- Regularly inspect the mounts for any signs of wear, damage, or loose fixings.
3. Paket tarkibi
The NORDRIVE N60050 package includes the following components:
- 2 x Wall Mount Assemblies (telescopic arms with U-shaped supports)
- Wall fixing plugs and screws
- Adhesive anti-scratch protectors for the wall
3.1-rasm: portlagan view showing the individual components of the wall mount, including the wall plate, telescopic arm, and U-shaped support.
4. O'rnatish va o'rnatish
Follow these steps to properly install your NORDRIVE N60050 Roof Box Wall Mounts:
- Joyni tanlang: Select a suitable wall in your garage or storage area. Ensure there is enough space for the roof box and that the wall is capable of bearing the load.
- Burg'ulash nuqtalarini belgilang: Hold one wall mount assembly against the wall at the desired height and position. Use a pencil to mark the drilling points for the wall plate. Repeat for the second mount, ensuring they are level and spaced appropriately for your roof box.
- Burg'ilash teshiklari: Using an appropriate drill bit for your wall type, drill holes at the marked points.
- Devorga vilkalarni joylashtiring: Insert the provided wall fixing plugs into the drilled holes.
- Attach Mounts: Align the wall plates of the mounts with the holes and secure them firmly to the wall using the provided screws.
- Apply Protectors: Attach the adhesive anti-scratch protectors to the wall where the mounts might contact it when folded, or to the mounts themselves where they contact the roof box.
- Uzunlikni sozlash: The mounts are telescopic and can be adjusted from 35 cm to 52 cm. Loosen the knob on the underside of the arm, extend or retract to the desired length, and then tighten the knob securely. This adjustment allows for various roof box widths.
Image 4.1: Illustration demonstrating the telescopic adjustment range of the wall mounts, from a minimum of 35 cm to a maximum of 52 cm, accommodating different roof box sizes.
5. Operatsiya
5.1 Storing Your Roof Box
- Ensure the mounts are extended to the appropriate length for your roof box (refer to Section 4, step 7).
- Carefully lift your roof box and place it onto the U-shaped supports of the wall mounts. Ensure it is balanced and securely seated.
- It is recommended to use additional straps or bungee cords (not included) to further secure the roof box to the mounts, especially if it will be stored for extended periods or in an area prone to vibrations.
Image 5.1: A roof box securely stored on the NORDRIVE N60050 wall mounts in a garage, demonstrating practical use and space-saving benefits.
5.2 Folding the Mounts (When Not in Use)
When the mounts are not in use, they can be folded against the wall to save space:
- Remove the roof box from the mounts.
- Gently push the U-shaped support arms upwards and inwards towards the wall. The design allows them to pivot and fold flat against the wall, reducing their projection to approximately 6 cm.
Image 5.2: Diagram illustrating the foldable design of the wall mounts, showing how they can be collapsed to a minimal projection of 6 cm from the wall when not in use.
6. Xizmat ko'rsatish
- Tozalash: Wipe the mounts with a damp Chang va kirni tozalash uchun matodan foydalaning. Abraziv tozalagichlardan saqlaning.
- Tekshirish: Periodically check all screws and wall fixings to ensure they remain tight. Inspect the rubber coating for any damage that could scratch your roof box.
- Moylash: If the telescopic or folding mechanism becomes stiff, apply a small amount of silicone spray or light lubricant to the moving parts.
7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| Mounts feel unstable after installation. | Improper wall fixings or unsuitable wall material. | Ensure correct wall plugs and screws are used for your wall type. Verify the wall is structurally sound. Re-tighten all screws. |
| Telescopic arm is difficult to adjust. | Knob not fully loosened, or mechanism is dirty/dry. | Ensure the adjustment knob is completely loosened. Clean the telescopic parts and apply a light lubricant if necessary. |
| Roof box slides on the mounts. | Insufficient grip or improper placement. | Ensure the roof box is centered and balanced. Consider using additional straps or non-slip material on the rubber-coated arms. |
8. Texnik shartlar
- Model: N60050
- Brend: NORDRIVE
- Material: Metal structure with Plastic/Rubber coating
- Rang: Other (typically black/silver)
- Uslub: Lateral (Side-mounted)
- Miqdori: 1 set (includes 2 wall mount assemblies)
- O'rnatish turi: Devorga o'rnatish
- Telescopic Adjustment Range: 35 sm - 52 sm
- Folded Projection from Wall: Taxminan 6 sm
- Anti-scratch coating: Kauchuk
9. Aloqa va qo'llab-quvvatlash
For further assistance, technical support, or inquiries regarding your NORDRIVE N60050 Roof Box Wall Mounts, please refer to the contact information provided with your purchase or visit the official NORDRIVE websayt.
Iltimos, ushbu qo'llanmani kelajakda foydalanish uchun saqlab qo'ying.
