Kirish
The Strymon Sunset is a versatile dual overdrive pedal designed to provide a wide range of classic overdrive and distortion tones. It features two independent channels, A and B, each offering distinct overdrive circuits, allowing for flexible tone shaping and stacking options. This manual provides detailed instructions on setting up, operating, and maintaining your Sunset pedal.
Sozlash; o'rnatish
Follow these steps to properly set up your Strymon Sunset pedal:
- Quvvat ulanishi: Connect a standard 9V DC power supply (center-negative, 200mA minimum) to the 9VDC input jack on the rear panel. Ensure the power supply meets the specified voltage va joriy talablar.
- Kirish ulanishi: Gitara yoki boshqa asbobni ulang IN jack on the rear panel using a standard 1/4-inch instrument cable.
- Chiqish ulanishi: ni ulang OUT jack on the rear panel to your amplifier or the next pedal in your signal chain using a standard 1/4-inch instrument cable.
- Ixtiyoriy ulanishlar:
- Expression Pedal (EXP): For real-time control over parameters, connect an expression pedal to the EXP jek.
- Favorite Switch (FAV): Connect an external favorite switch to the FAV jack to recall a saved preset.
Figure 1: Rear panel connections of the Strymon Sunset pedal. This view highlights the IN, OUT, FAV, EXP, and 9VDC power input jacks, along with the B->A and A+B switches.
Foydalanish bo'yicha ko'rsatmalar
The Strymon Sunset features two independent overdrive channels, A and B, each with unique voicings and controls. Understanding these controls is key to unlocking the pedal's full potential.
Figure 2: Top panel controls of the Strymon Sunset pedal. This image displays the LEVEL, DRIVE, and TONE knobs for both channels, along with the A and B circuit type switches and footswitches.
Old panel boshqaruvlari
- Channel A Controls:
- LEVEL A: Adjusts the output volume of Channel A.
- DRIVE A: Controls the amount of gain/overdrive for Channel A.
- TONE A: Shapes the tonal character of Channel A, typically acting as a high-cut filter.
- A Circuit Switch: Selects between three distinct overdrive circuits for Channel A:
- Ge (Germanium): Smooth, warm, and dynamic overdrive, reminiscent of classic germanium diode circuits.
- Texas: Mid-focused, bluesy overdrive with a distinct character.
- Uchburchak: A treble booster circuit, ideal for pushing an already overdriven amp or adding sparkle.
- Channel B Controls:
- LEVEL B: Adjusts the output volume of Channel B.
- DRIVE B: Controls the amount of gain/overdrive for Channel B.
- TONE B: Shapes the tonal character of Channel B.
- B Circuit Switch: Selects between three distinct overdrive circuits for Channel B:
- 2 Stage: A classic two-stage soft-clipping overdrive.
- Qattiq: A harder clipping overdrive with increased compression and sustain.
- JFET: A JFET-based circuit offering a more amp-like, natural overdrive.
- Oyoq kalitlari:
- A Footswitch: Engages or bypasses Channel A. The corresponding LED indicates its status.
- B Footswitch: Engages or bypasses Channel B. The corresponding LED indicates its status.
Orqa panel kalitlari
- B->A / A+B Switch: This switch determines the stacking order when both channels are engaged:
- B->A: Channel B feeds into Channel A. This is useful for boosting Channel A with Channel B's gain.
- A+B: Channels A and B run in parallel. This allows for blending the two distinct tones.
- BRIGHT Switch: A global switch that adds a subtle high-end boost to the overall output.
- +: Engages the bright boost.
- -: Disengages the bright boost.
Xizmat
To ensure the longevity and optimal performance of your Strymon Sunset pedal, follow these maintenance guidelines:
- Tozalash: Use a soft, dry cloth to wipe down the pedal's enclosure. Avoid using abrasive cleaners or solvents, as they may damage the finish or internal components.
- Saqlash: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
- Quvvatlantirish manbai: Always use a regulated 9V DC center-negative power supply that meets the pedal's current requirements (200mA minimum). Using an incorrect power supply can damage the unit and void the warranty.
- Ulanishlar: Vaqti-vaqti bilan barcha kabel ulanishlarini eskirganligini tekshirib turing. Dokratlarning chang va axlatdan xoli ekanligiga ishonch hosil qiling.
Muammolarni bartaraf qilish; nosozliklarni TUZATISH
If you encounter issues with your Strymon Sunset pedal, refer to the following common problems and solutions:
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| No sound or weak signal. | Incorrect power supply, faulty cables, incorrect connections, pedal bypassed. |
|
| Keraksiz shovqin yoki g'uvullash. | Ground loop, faulty power supply, interference from other electronics. |
|
| LEDs not lighting up. | No power, pedal malfunction. |
|
Texnik xususiyatlari
| Model: | Sunset Dual Overdrive |
| Quvvat talabi: | 9V DC, Center-Negative, 200mA minimum |
| Signal formati: | Analog |
| Uskuna interfeysi: | HP-HSC |
| Olchamlari (U x G x Y): | 8 x 5 x 4 dyuym (20.3 x 12.7 x 10.2 sm) |
| Og'irligi: | 1.34 funt (0.61 kg) |
| Rang: | Red, Silver |
| ASIN: | B0875MSLCJ |
| Birinchi mavjud sana: | 16 yil 2020 aprel |
Kafolat va qo'llab-quvvatlash
Strymon products are built with high-quality components and undergo rigorous testing. For information regarding warranty coverage, product registration, and technical support, please visit the official Strymon websaytga yoki mijozlarga xizmat ko'rsatish bo'limiga murojaat qiling. Kafolat da'volari uchun xarid kvitansiyasini xaridni tasdiqlovchi hujjat sifatida saqlang.
Strymon Official Websayt: www.strymon.net
