iBeam Micro Camera Black Fixed Angle User Manual

1. Kirish

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Xavfsizlik ma'lumotlari

• Always disconnect the vehicle's battery before beginning any electrical installation.
• Qisqa tutashuvlar yoki shikastlanishlarning oldini olish uchun barcha simlar to'g'ri izolyatsiyalangan va mahkamlanganligiga ishonch hosil qiling.
• Do not obstruct the driver's view or interfere with vehicle controls during installation.
• O'rnatish jarayonining biron bir qismiga ishonchingiz komil bo'lmasa, professional o'rnatuvchi bilan maslahatlashing.
• This product is intended as an aid and should not replace safe driving practices.

3. Paket tarkibi

Paketda barcha elementlar mavjudligiga ishonch hosil qiling:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• Simlarni bog'lash
• Qo'llanma (bu hujjat)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Mahsulot tugadiview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Rasm: yaqindan view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Asosiy xususiyatlar:

• Yilni dizayn: Small footprint for discreet installation.
• Suvga chidamli: IP68 rated for reliable performance in various weather conditions.
• Tasvir sensori: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view yoki old view).
• O'rnatish: Features an 8MM threaded bolt for secure mounting.

5. O'rnatish va o'rnatish

Follow these steps for proper installation of your iBeam Micro Camera:

1. O'rnatish joyini tanlang: Select a location that provides an unobstructed view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. O'rnatish yuzasini tayyorlang: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Kamerani o'rnatish: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Simli ulanishlar:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Sinov funktsiyasi: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Xavfsiz simlar: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Foydalanish bo'yicha ko'rsatmalar

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Rasm yo'nalishi: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Xizmat ko'rsatish

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• Tozalash: Vaqti-vaqti bilan kamera linzalarini yumshoq, damp to'sqinlik qilishi mumkin bo'lgan axloqsizlik, chang yoki suv dog'larini olib tashlash uchun mato view. Do not use abrasive cleaners.
• Tekshirish: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Yuqori bosimli yuvishdan saqlaning: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Texnik shartlar

10. Kafolat va qo'llab-quvvatlash

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam websayt. Xarid kvitansiyasini har qanday kafolat da'volari uchun xaridni tasdiqlovchi hujjat sifatida saqlang.

Ishlab chiqaruvchi: Metra Electronics Corp