Sharp B089ZMSR39

Sharp Digital Alarm with AccuSet - Automatic Smart Clock User Manual

Model: B089ZMSR39

Kirish

This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.

Sharp Digital Alarm Clock, front view, showing red LED display with time 12:08.

1-rasm: Old view Sharp raqamli budilnik soati.

Mahsulot xususiyatlari

Diagram showing key features of the Sharp Digital Alarm Clock: Large 0.9 inch Red LED Display, AccuSet Automatic Time Setting, High & Low Display Dimmer Control, Easy Set Top Button Controls, and Installed Battery Backup.

Figure 2: Key features of the Sharp Digital Alarm Clock.

Sozlash; o'rnatish

1. Initial Power-Up and Time Zone Selection

  1. Locate the time zone switch on the bottom of the clock.
  2. Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
  3. Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.

2. Daylight Savings Time (DST) Adjustment

Yozgi vaqtga o'tish uchun:

3. Batareyani zaxiralash

The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.

Foydalanish bo'yicha ko'rsatmalar

Yuqori view of the Sharp Digital Alarm Clock showing button labels: DIMMER HI/LO, TIME SET, ALARM SET, SNOOZE, HOUR SET, MINUTE SET, ALARM ON/OFF. Also indicates PM indicator and ALARM indicator on the display.

Figure 3: Top panel controls and display indicators.

1. Signalni o'rnatish

  1. ni bosing Signalni o'rnatish button once. The alarm time will flash on the display.
  2. ni bosing SOAT O'rnatilgan button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
  3. ni bosing MINUTE SET signal daqiqasini sozlash uchun tugma.
  4. ni bosing Signalni o'rnatish button again to confirm and exit alarm setting mode.

2. Turning Alarm On/Off

3. Kechiktirish funksiyasi

Signal chalinganda katta tugmani bosing TAKRORLASH button located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.

4. Dimmer Control

LED displeyning yorqinligini sozlash uchun:

Rasmni yaqinlashtirib olish view of the Sharp Digital Alarm Clock display, highlighting the high and low dimmer control feature.

Figure 4: Display brightness adjustment.

Xizmat

Battery Replacement (CR2032)

The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage, batareyani almashtirish kerak bo'lishi mumkin.

  1. Unplug the clock from the electrical outlet.
  2. Locate the screw-secured battery compartment on the bottom of the clock.
  3. Unscrew the compartment cover and carefully remove the old CR2032 battery.
  4. Insert a new CR2032 battery, ensuring the correct polarity (+ side up).
  5. Replace the compartment cover and secure it with the screw.
  6. Plug the clock back into the electrical outlet.

Eslatma: Eski batareyalarni mahalliy qoidalarga muvofiq tarzda utilizatsiya qiling.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

MuammoMumkin sababYechim
Soat displeyi bo'sh.Quvvat yo'q.Ensure the clock is securely plugged into a working electrical outlet. Check the power source.
Vaqt noto'g'ri.Incorrect time zone selected; DST switch incorrect; Power interruption.Verify the time zone switch on the bottom of the clock. Check the DST switch position. If power was interrupted, the AccuSet should reset the time; if not, check/replace backup battery.
Signal eshitilmaydi.Alarm not activated; Incorrect alarm time set.Ensure the alarm indicator light is on (press ALARM ON/OFF button). Verify the alarm time is set correctly.
Displey juda yorqin/xira.Dimmer sozlamalarini sozlash kerak.Press the DIMMER HI/LO button to cycle through brightness settings.

Texnik xususiyatlari

Diagram showing the dimensions of the Sharp Digital Alarm Clock: 5.5 inches wide, 2.6 inches high, and 2.45 inches deep. The display size is 0.9 inches.

5-rasm: Mahsulot o'lchamlari.

Qo'shimcha ma'lumot

For further assistance or product inquiries, please refer to the official Sharp websayti yoki mijozlarni qo'llab-quvvatlash xizmatiga murojaat qiling.

Ushbu mahsulot faqat bino ichida foydalanish uchun mo'ljallangan.

Tegishli hujjatlar - B089ZMSR39

Oldindanview SHARP Atomic Wall Clock: Setup, Features, and Manual
Comprehensive instruction manual for the SHARP Radio Controlled Atomic Wall Clock (Model SPC876), covering setup, time zone settings, DST, signal reception, manual setting, and warranty information.
Oldindanview Sharp Atomic Clock SPC1019 Instructions and Warranty
User manual and warranty information for the Sharp Atomic Clock SPC1019, detailing setup, time setting, alarm functions, and troubleshooting.
Oldindanview SHARP SPC971 Atomic Wall Clock User Manual and Instructions
Detailed instructions and safety information for the SHARP SPC971 Atomic Wall Clock, covering setup, battery replacement, and operation.
Oldindanview Sharp SPC1003/1005 Atom ob-havo stansiyasi foydalanuvchi qo'llanmasi
Sharp SPC1003/1005 Atom Meteorologiya Stansiyasi uchun batafsil qo'llanma, unda aniq vaqt, ob-havo va atrof-muhit monitoringi uchun xususiyatlar, sozlash, boshqaruv elementlari va texnik xususiyatlar batafsil bayon etilgan.
Oldindanview Sharp Atom devor soati SPC971: ko'rsatmalar va kafolat
Sharp Atomic Wall Clock (Model SPC971) uchun foydalanuvchi qoʻllanmasi va kafolat maʼlumotlari, batafsil sozlash, xususiyatlar va bir yillik cheklangan kafolat.
Oldindanview Sharp SPC276 Digital Alarm Clock with Bluetooth & Sleep Sounds: User Guide
Comprehensive guide to operating the Sharp SPC276 Digital Alarm Clock, covering features, setup, alarm functions, Bluetooth connectivity, sleep sounds, and safety precautions.