Cisco Meraki MR76 Wi-Fi 6 Outdoor/Industrial Access Point User Manual

1. Kirish

This manual provides essential information for the installation, configuration, and maintenance of your Cisco Meraki MR76 Wi-Fi 6 Outdoor/Industrial Access Point. The MR76 is designed for high-performance wireless connectivity in challenging outdoor and industrial environments, leveraging Wi-Fi 6 technology and integrated Bluetooth radios. It requires external antennas for operation and is managed through the Cisco Meraki cloud platform.

2. Xavfsizlik ma'lumotlari

• Barcha ko'rsatmalarni o'qing: Before installation and operation, carefully read and understand all instructions provided in this manual.
• Malakali xodimlar: O'rnatish va texnik xizmat ko'rsatish faqat malakali xodimlar tomonidan amalga oshirilishi kerak.
• Quvvat manbai: Ensure the power source meets the specifications for Power over Ethernet (PoE) and is properly grounded.
• Antennani o'rnatish: Install external antennas according to local regulations and manufacturer guidelines to avoid interference and ensure safety.
• Atrof-muhitga oid fikrlar: While designed for outdoor use, avoid installing the device in locations subject to extreme temperatures, direct lightning strikes, or excessive vibration.
• Elektr xavfi: Do not open the device enclosure. Refer all servicing to qualified service personnel.

3. Paket tarkibi

Paketingizda quyidagi elementlar mavjudligiga ishonch hosil qiling:

• Cisco Meraki MR76 Access Point unit
• Mounting bracket (for pole or wall mounting)
• Mounting hardware (screws, anchors, hose clamps)
• Tez boshlash uchun qo'llanma
• Note: External antennas are required for operation and are sold separately.

4. Jismoniy tugashview

The MR76 features a robust, weatherproof enclosure suitable for outdoor and industrial deployments. It includes ports for network connectivity and antenna connections.

1-rasm: Old view of the Cisco Meraki MR76 Access Point. This image shows the compact design of the unit, which is built for outdoor and industrial environments.

LED ko'rsatkichlari

The device includes an LED indicator to provide status information:

• Toʻq yashil: Device is online and operating normally.
• Yashil miltillovchi: Device is booting up or performing a firmware upgrade.
• Qattiq kehribar: Device is experiencing a fault or is not connected to the Meraki cloud.

Portlar va ulagichlar

• Ethernet porti: RJ45 connector for network connectivity and Power over Ethernet (PoE) input.
• Antenna ulagichlari: Multiple N-type connectors for external Wi-Fi antennas.
• Qayta tiklash tugmasi: Small button for factory reset (requires a paperclip or similar tool).

5. O'rnatish va sozlash

5.1 Kirish nuqtasini o'rnatish

The MR76 can be mounted on a pole or a wall. Choose a location that provides optimal wireless coverage and is accessible for maintenance.

1. Joyni tanlang: Identify a suitable mounting location, considering line of sight for wireless signals and proximity to a PoE-enabled network switch.
2. O'rnatish kronshteynini ulang: Secure the mounting bracket to the pole using the provided hose clamps or to a wall using screws and anchors. Ensure the bracket is firmly attached.
3. Attach MR76 to Bracket: Align the MR76 unit with the mounting bracket and slide it into place until it clicks securely.

5.2 Connecting External Antennas

The MR76 requires external antennas for Wi-Fi operation. Ensure you use compatible N-type antennas.

1. Identify Antenna Ports: Locate the N-type connectors on the MR76.
2. Antennalarni ulash: Carefully screw the external antennas onto the connectors. Hand-tighten only; do not overtighten.
3. Position Antennas: Adjust the antenna orientation for optimal coverage based on your deployment plan.

5.3 Qurilmani quvvatlantirish

The MR76 is powered via Power over Ethernet (PoE).

1. Ethernet kabelini ulang: Connect an Ethernet cable from a PoE-enabled switch or PoE injector to the Ethernet port on the MR76.
2. Quvvatni tekshiring: Once connected, the LED indicator on the MR76 should illuminate, indicating power.

5.4 Tarmoqqa ulanish

Ensure the Ethernet cable from the MR76 is connected to a network switch that has internet access and is configured for your Meraki network.

6. Operatsion va konfiguratsiya

The Cisco Meraki MR76 is managed entirely through the Meraki cloud dashboard. No local configuration is required.

1. Access Meraki Dashboard: Ochish a web brauzerni oching va ga oʻting dashboard.meraki.com. Log in with your Meraki account credentials.
2. Qurilma qo'shish: If this is a new device, add it to your network in the dashboard using its serial number.
3. Tarmoq sozlamalarini sozlash: Within the dashboard, configure your wireless SSIDs, security protocols (WPA2, WPA3), VLANs, and other network-specific settings.
4. Ishlash monitoringi: Use the dashboard to monitor the access point's status, client connectivity, and overall network performance.
5. Bluetooth Radios: The integrated Bluetooth radios can be configured and managed via the Meraki dashboard for location services or IoT applications.

7. Xizmat ko'rsatish

• Dasturiy ta'minotni yangilash: Firmware updates are automatically managed and deployed by the Meraki cloud. Ensure your device has a stable internet connection for these updates.
• Jismoniy tekshiruv: Periodically inspect the device and antenna connections for any signs of damage, corrosion, or loose fittings, especially in harsh outdoor environments.
• Tozalash: Gently clean the exterior of the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are sealed if not in use.
• Antennani tekislash: Re-check antenna alignment if wireless performance degrades or if the device has been subjected to strong winds or physical impact.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

For further assistance, refer to the Cisco Meraki documentation or contact support.

9. Texnik shartlar

10. Kafolat va qo'llab-quvvatlash

The Cisco Meraki MR76 includes a 5-year license and support package (MR76-HW+LIC-ENT-5YR). This package provides access to the Meraki cloud management platform, firmware updates, and 24/7 technical support.

For technical assistance, documentation, or to open a support case, please visit the official Cisco Meraki support portal:

https://meraki.cisco.com/support