1. Kirish
This manual provides detailed instructions for the safe and effective operation of your ANCEL AD410 OBD-II Code Reader and ANCEL BST200 Car Battery Load Tester. Please read this manual thoroughly before use and retain it for future reference.
2. Mahsulot tugadiview
The ANCEL AD410 is an enhanced OBD-II code reader designed for automotive diagnostics, capable of reading and clearing fault codes, displaying live data, and performing various system tests. The ANCEL BST200 is a classic 12V battery analyzer for testing lead-acid batteries.
Figure 1: ANCEL AD410 Code Reader (right) and ANCEL BST200 Battery Tester (left).
2.1 ANCEL AD410 Code Reader
The AD410 is designed to interface with your vehicle's On-Board Diagnostics (OBD-II) system to retrieve diagnostic trouble codes (DTCs) and monitor various engine parameters. It features a user-friendly interface for quick and accurate vehicle health assessment.
Figure 2: Close-up of the ANCEL AD410 Code Reader.
2.2 ANCEL BST200 Car Battery Load Tester
The BST200 is a dedicated tool for testing 12V lead-acid batteries, providing quick and accurate results on battery health, charge status, and cranking performance. It supports various battery types and CCA ratings.
Figure 3: Close-up of the ANCEL BST200 Battery Tester.
3. Sozlash
3.1 ANCEL AD410 Code Reader Setup
- OBD-II portini toping: The 16-pin OBD-II Data Link Connector (DLC) is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's service manual for the exact location.
- Connect the AD410: Plug the AD410's OBD-II connector firmly into the vehicle's DLC. The device will power on automatically.
- Ateşleme tizimini yoqing: Avtomobilning kontaktini "ON" holatiga o'tkazing (dvigatel o'chirilgan).
Video 1: Demonstration of connecting the ANCEL AD410 to a vehicle's OBD-II port and initial power-up. This video shows the device being plugged in and displaying its main menu, indicating readiness for diagnostic tasks.
3.2 ANCEL BST200 Battery Tester Setup
- Batareyaga ulanish: Qizil cl ni biriktiringamp 12V batareyaning musbat (+) terminaliga va qora kontaktgaamp salbiy (-) terminalga.
- Yoqilgan: The BST200 will power on automatically once connected to the battery.
Figure 4: ANCEL BST200 connected to a battery, illustrating both in-vehicle and out-of-vehicle connection methods.
4. Foydalanish bo'yicha ko'rsatmalar
4.1 ANCEL AD410 Code Reader Operations
The AD410 provides critical functionality for vehicle diagnostics:
- O'qish kodlari: Retrieves stored, pending, and permanent Diagnostic Trouble Codes (DTCs).
- Kodlarni o'chirish: DTClarni tozalaydi va Nosozlik indikatori L ni o'chiradiamp (MIL), also known as the Check Engine Light.
- Jonli ma'lumotlar oqimi: Displays real-time data from the vehicle's sensors, such as engine RPM, vehicle speed, coolant temperature, O2 sensor readings, and fuel trims.
- I/M tayyorligi: Checks the status of emission-related monitoring systems to determine if the vehicle is ready for a smog test.
- O2 sensori sinovi: Monitors and adjusts the air/fuel mixture, helping to identify issues related to fuel efficiency and emissions.
- EVAP tizimi sinovi: Initiates a leak test on the vehicle's evaporative emission system to check for fuel tank system integrity.
- Frame ma'lumotlarini muzlatish: Captures a snapshot of sensor values at the moment a fault code was set, aiding in diagnosis.
- Avtomobil haqida ma'lumot: Avtomobil identifikatsiya raqamini (VIN), kalibrlash identifikatorini va kalibrlashni tasdiqlash raqamini (CVN) oladi.
5 -rasm: tugadiview of ANCEL AD410 diagnostic capabilities.
Figure 6: Using the ANCEL AD410 to address a Check Engine Light.
Figure 7: ANCEL AD410 performing a One-Click I/M Readiness Test.
4.2 ANCEL BST200 Battery Tester Operations
The BST200 offers comprehensive battery testing functions:
- Batareya sinovi: Provides accurate results on CCA value, CCA rating, voltage, internal resistance, state of health (SOH), and state of charge (SOC).
- Krank sinovi: Assesses the battery's ability to start the engine.
- Zaryadlash testi: Evaluates the vehicle's charging system.
- Review Maʼlumotlar: Ruxsat beradi viewing of previous test results.
The BST200 works on automotive 12V lead-acid batteries with a capacity of 100 to 1100 CCA, including:
- Muntazam suv bosgan
- AGM tekis plastinka
- AGM spirali
- GEL batteries
Figure 8: ANCEL BST200 displaying battery test results.
Figure 9: ANCEL BST200 supports AGM, GEL, and Regular Flooded battery types.
5. Xizmat ko'rsatish
- Tozalash: Yumshoqdan foydalaning, damp qurilmani tozalash uchun mato. Abraziv tozalash vositalari yoki erituvchilardan foydalanmang.
- Saqlash: Store the devices in a dry, clean environment away from direct sunlight and extreme temperatures.
- Dasturiy ta'minot yangilanishlari: Periodically check the ANCEL official weboptimal ishlash va moslikni ta'minlash uchun mavjud dasturiy ta'minot yangilanishlari uchun sayt.
6. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
- Qurilma yoqilmaydi: Ensure the device is correctly connected to the vehicle's OBD-II port (AD410) or battery terminals (BST200). Check the vehicle's battery voltage if using the AD410, as it draws power from the vehicle.
- Aloqa xatosi: Verify the vehicle's ignition is in the 'ON' position. Check for loose connections at the OBD-II port or battery clamps. Ensure the vehicle is OBD-II compliant (most vehicles from 1996 onwards).
- Incorrect Battery Test Results: Ensure battery terminals are clean and connections are secure. Verify the correct battery type and CCA rating are entered into the BST200.
7. Texnik shartlar
7.1 ANCEL AD410 Code Reader
- Displey: Orqa yoritilgan LCD
- Operatsion jildtage: 9-18V DC (from vehicle OBD-II port)
- Qo'llab -quvvatlanadigan protokollar: All OBD-II protocols (CAN, J1850 PWM, J1850 VPW, ISO9141, KWP2000)
7.2 ANCEL BST200 Car Battery Load Tester
- Ilova: 12V Lead-Acid Batteries
- Batareya quvvati: 100-1100 CCA
- Qo'llab-quvvatlanadigan batareya turlari: Regular Flooded, AGM Flat Plate, AGM Spiral, GEL
- Sinov standartlari: CCA, CA, MCA, JIS, DIN, IEC, EN, SAE
8. Kafolat va qo'llab-quvvatlash
For warranty information, technical support, or service inquiries, please refer to the product packaging, the ANCEL official website, or contact ANCEL customer service directly. Keep your purchase receipt for warranty claims.
