EBYTE E32-900T20D

EBYTE E32-900T20D LoRa simsiz moduli qo'llanmasi

Model: E32-900T20D

1. Kirish

The EBYTE E32-900T20D is a LoRa wireless module designed for long-range, low-power data transmission. It operates in the 868MHz and 915MHz frequency bands, offering robust anti-interference capabilities and extended communication distances up to 5.5 kilometers. This module integrates a serial port interface, making it suitable for various embedded applications requiring reliable wireless connectivity.

EBYTE E32-900T20D LoRa Wireless Module front view.

1-rasm: Old view of the EBYTE E32-900T20D LoRa Wireless Module.

2. Asosiy xususiyatlar

  • LoRa Spread Spectrum Technology: Utilizes LoRa Direct Sequence Spread Spectrum for enhanced communication range and interference resistance.
  • Dual Frequency Bands: Supports both 868MHz and 915MHz operation.
  • High Transmit Power: Features a 20dBm (100mW) transmit power output.
  • Uzoq aloqa masofasi: Capable of transmitting data up to 5.5 kilometers in optimal conditions.
  • Seriyali port interfeysi: Easy integration with microcontrollers via UART (TX, RX).
  • Bir nechta ish rejimlari: Offers Transmission, Wake-up, Power Saving, and Deep Sleep modes for flexible power management.
Diagram illustrating LoRa spread spectrum communication with anti-interference and long transmission distance.

Figure 2: Illustration of LoRa spread spectrum communication benefits.

3. Texnik shartlar

ParametrQiymat
Model raqamiE32-900T20D
Chastota diapazonlari868 MGts / 915 MGts
Quvvatni uzatish20 dBm (100 mVt)
Aloqa masofasi5.5 km gacha (ko'rish chizig'i)
InterfeysUART (Serial Port)
Olchamlari (U x W)36 mm x 21 mm
Ishlab chiqaruvchiEBYTE
Paket o'lchamlari2.4 x 2.01 x 0.47 dyuym
Og'irligi0.71 untsiya
EBYTE E32-900T20D LoRa Wireless Module with dimensions 36mm by 21mm.

Figure 3: E32-900T20D module with physical dimensions.

4. Pin Definitions and Hardware Interface

The E32-900T20D module features a standard pin header for integration. For detailed pinout information, including specific functions for VCC, GND, TX, RX, AUX, M0, and M1 pins, please refer to the official EBYTE E32-900T20D datasheet available on the manufacturer's website. Proper connection of these pins to your microcontroller or host device is crucial for correct operation.

  • VCC: Quvvat manbai kirish.
  • GND: Yerga ulanish.
  • TX: Transmit data output (connects to RX of host).
  • RX: Receive data input (connects to TX of host).
  • AUX: Auxiliary pin, often used for status indication (e.g., data ready).
  • M0, M1: Mode selection pins, used to configure the module's operating mode.

5. Sozlash va ulanish

  1. Quvvatlantirish manbai: Connect the VCC pin to a stable power source within the module's specified voltage range. Connect GND to the system ground.
  2. Seriyali aloqa: Connect the module's TX pin to the RX pin of your microcontroller or host device, and the module's RX pin to the TX pin of your host device. Ensure both devices share a common ground.
  3. Antenna ulanishi: Securely attach a compatible 868MHz or 915MHz antenna to the module's antenna connector. An improperly connected or missing antenna can damage the module.
  4. Rejim tanlash: Use the M0 and M1 pins to set the desired operating mode. Refer to the datasheet for specific pin configurations for each mode.
  5. Dastur konfiguratsiyasi: Configure your host device's UART settings (baud rate, parity, stop bits) to match the module's default or configured settings. The module can often be configured via AT commands through the serial interface.

6. Ishlash rejimlari

The E32-900T20D module supports four distinct operating modes, each optimized for different application requirements:

  • Etkazish tartibi: This is the standard transparent transmission mode, commonly used for continuous data exchange.
  • Wake-up Mode: Designed for low-power applications, this mode allows the transmitter to wake up the receiver by automatically adding a wake-up code before data transmission.
  • Quvvatni tejash rejimi: In this receiver-only mode, the module consumes less power. It can receive data but cannot initiate transmissions.
  • Chuqur uyqu rejimi: The lowest power consumption mode, where the module's overall power consumption is significantly reduced (e.g., to 2uA), ideal for battery-powered devices requiring minimal activity.
Infographic showing four working modes of the EBYTE LoRa module: Transmission, Wake-up, Power Saving, and Deep Sleep.

4 -rasm: tugadiview of the four working modes.

7. Ilova stsenariylari

The E32-900T20D LoRa module's long-range and low-power characteristics make it suitable for a wide range of Internet of Things (IoT) and industrial applications:

  • Smart Agriculture: Environmental monitoring, irrigation control, livestock tracking.
  • Simsiz masofadan boshqarish: Industrial equipment control, smart home devices.
  • Industrial Scene: Sensor data collection, asset tracking, process automation.
  • Smart Wearables: Low-power communication for wearable devices.
Diagram showing various application scenarios for the LoRa module, including smart agriculture, wireless remote control, industrial, and smart wearables.

5-rasm: Masalanamples of application scenarios for the E32-900T20D module.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your E32-900T20D module, consider the following troubleshooting steps:

  • Aloqa yo'q:
    • Elektr ta'minoti voltage and ground connections.
    • Check serial port wiring (TX to RX, RX to TX).
    • Ensure UART baud rate, data bits, parity, and stop bits match on both devices.
    • Confirm M0 and M1 pins are set correctly for the desired operating mode.
  • Qisqa aloqa diapazoni:
    • Ensure the antenna is securely connected and is appropriate for the operating frequency (868MHz or 915MHz).
    • Check for physical obstructions between modules.
    • Verify transmit power settings (if configurable).
  • Modul javob bermayapti:
    • Perform a power cycle.
    • Check for any short circuits or incorrect wiring that might damage the module.

For persistent issues, refer to the official EBYTE datasheet or contact technical support.

9. Xizmat ko'rsatish

To ensure the longevity and optimal performance of your E32-900T20D module:

  • Keep the module in a dry environment, away from moisture and corrosive substances.
  • Avoid exposing the module to extreme temperatures or sudden temperature changes.
  • Handle the module with care to prevent physical damage to components or pins.
  • Ensure proper ventilation if operating in an enclosed space.

10. Kafolat va qo'llab-quvvatlash

The EBYTE E32-900T20D LoRa Wireless Module is manufactured by EBYTE. For detailed warranty information, technical support, and access to the latest datasheets and resources, please visit the official EBYTE websayt yoki ularning qo'llab-quvvatlash jamoasi bilan bog'laning.

Ishlab chiqaruvchi: EBYTE

Rasmiy Websayt: http://www.cdebyte.com/

Yordam elektron pochtasi: service@cdebyte.com

Tegishli hujjatlar - E32-900T20D

Oldindanview E32-xxxT20x LoRa simsiz moduli foydalanuvchi qo'llanmasi
User manual for the E32-xxxT20x LoRa wireless module by Ebyte, detailing specifications, hardware, AT commands, and application notes for 20dBm LoRa modules. Covers features, parameters, pin definitions, connections, working modes, register control, AT commands, hardware design, FAQ, production guidance, and model information.
Oldindanview E22-900T30S foydalanuvchi qo'llanmasi - EBYTE SX1262 simsiz moduli
868M/915MHz diapazonlari uchun SX1262 LoRa texnologiyasini o'z ichiga olgan EBYTE E22-900T30S simsiz moduli uchun foydalanuvchi qo'llanmasi. Texnik xususiyatlar, xususiyatlar, ilovalar, ish rejimlari, apparat dizayni va muammolarni bartaraf etishni o'z ichiga oladi.
Oldindanview E32-900T20S SMD Wireless Module User Manual
User manual for the EBYTE E32-900T20S, an 868MHz/915MHz SMD wireless module utilizing LoRa technology. Covers specifications, operation, commands, and hardware design.
Oldindanview EBYTE E52-400/900NW22S LoRa MESH simsiz tarmoq moduli foydalanuvchi qoʻllanmasi
Comprehensive user manual for the EBYTE E52-400/900NW22S LoRa MESH wireless networking module, operating on 400/900MHz bands with 160mW power. Covers specifications, AT commands, hardware design, and application scenarios.
Oldindanview EBYTE E220-900MM22S LoRa Module User Manual
Comprehensive user manual for the EBYTE E220-900MM22S LoRa module, covering specifications, hardware design, software operation, FAQ, production guidance, and antenna recommendations.
Oldindanview E32-868T20D foydalanuvchi qo'llanmasi: SX1276 868MHz 100mW DIP simsiz moduli
Comprehensive user manual for the EBYTE E32-868T20D wireless serial port module. Details include its SX1276 LoRa technology, 868MHz frequency, 100mW transmission power, DIP package, specifications, operating modes, command formats, hardware design considerations, and frequently asked questions. Suitable for IoT and industrial applications.