Renogy Suntree 32 Amp Single-Pole DC Circuit Breaker User Manual

1. Kirish

Ushbu qo'llanmada Renogy Suntree 32 uchun ko'rsatmalar berilgan Amp Single-Pole DC Circuit Breaker. This device is designed to protect DC electrical installations against overloads and short circuits. It incorporates both thermal and magnetic tripping mechanisms to ensure reliability and safety. The circuit breaker automatically disconnects the electrical circuit upon fault detection, preventing wire damage and fire hazards. It can also be manually operated for system maintenance. Its reversible connection design allows for wiring in either direction, supporting bidirectional current flow. A built-in indicator window provides immediate visual confirmation of the circuit breaker's contact position. The buckle design facilitates easy installation on standard DIN rails.

1-rasm: Renogy Suntree 32 Amp Single-Pole DC Circuit Breaker. This image shows the front and side view of the circuit breaker with its green toggle switch.

2. Xavfsizlik bo'yicha ko'rsatmalar

Please read and understand all safety instructions before installing or operating the circuit breaker. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• O'rnatish va texnik xizmat ko'rsatish faqat malakali xodimlar tomonidan amalga oshirilishi kerak.
• Always disconnect power to the circuit before installing, servicing, or removing the circuit breaker.
• Ensure the circuit breaker's current rating matches the circuit requirements.
• Do not use the circuit breaker in environments exceeding its specified operating conditions (temperature, humidity).
• Verify all connections are secure and properly insulated to prevent short circuits.
• chetlab o'tmang yoki tamper with the circuit breaker's protective mechanisms.
• O'rnatish va texnik xizmat ko'rsatish vaqtida izolyatsiyalangan qo'lqoplar va ko'zoynaklarni o'z ichiga olgan tegishli shaxsiy himoya vositalarini (SHV) taqing.

3. Mahsulot xususiyatlari

• Overload and Short Circuit Protection: Equipped with both thermal and magnetic tripping mechanisms.
• Qo'lda o'chirish: Can be manually opened under full rated load for maintenance.
• Reversible Connection: Allows wiring in either direction for bidirectional current flow.
• Contact Position Indicator: Built-in window clearly shows ON/OFF status.
• DIN temir yo'l o'rnatilishi: Buckle design for easy installation on standard DIN rails.
• Bardoshli qurilish: Designed for long mechanical and electrical life.

2-rasm: Internal components of the circuit breaker, illustrating the thermal and magnetic tripping mechanisms for reliable and safe operation.

3-rasm: Durability specifications for the circuit breaker, highlighting a mechanical life of 20,000 operations and an electrical life of 10,000 operations, along with high electrical conductivity.

4. Texnik shartlar

4-rasm: Physical dimensions of the Renogy Suntree 32 Amp Single-Pole DC Circuit Breaker, showing a length of 3.2 inches, a width of 0.7 inches, and a height of 3.2 inches, with a weight of 4.2 ounces.

5-rasm: Guidelines for selecting the correct circuit breaker size for controllers, inverters, DC devices, and solar panels. It outlines calculations based on continuous operating current and short-circuit current.

5. O'rnatish

5.1 Mounting on DIN Rail

1. Ensure the DIN rail is securely mounted within the breaker box or enclosure.
2. Align the circuit breaker's top slot with the top edge of the DIN rail.
3. Press the circuit breaker firmly against the DIN rail until the buckle mechanism clicks into place, securing it.
4. Verify the circuit breaker is firmly attached and does not wobble.

6-rasm: Step-by-step diagram illustrating the quick installation process of the circuit breaker onto a standard DIN rail using its buckle design. The diagram shows aligning the slot, pressing, and securing with a click.

5.2 Simli ulanishlar

The Renogy Suntree DC Circuit Breaker is designed for reversible connection, meaning it can be wired in either direction. However, it is crucial to maintain correct polarity for DC systems.

• Identify the positive (+) and negative (-) terminals on the circuit breaker and your DC system components.
• Connect the positive wire from the power source (e.g., solar panel, battery) to one terminal of the circuit breaker.
• Connect the positive wire to the load (e.g., inverter, charge controller) from the other terminal of the circuit breaker.
• Ensure all wire connections are tight and secure to prevent loose contacts and potential arcing.
• Double-check all wiring for correct polarity before applying power.

7-rasm: Diagram showing the connection points for the circuit breaker, indicating the positive terminal at the top and the corresponding connection at the bottom. This illustrates the reversible connection capability.

6. Operatsiya

6.1 Yoqish/o'chirish

• To switch the circuit breaker ON, push the toggle switch upwards until it locks into the "ON" position. The indicator window will show green.
• To switch the circuit breaker O'CHIRIB, pull the toggle switch downwards until it locks into the "OFF" position. The indicator window will show red.

6.2 Automatic Tripping

In the event of an overload or short circuit, the circuit breaker will automatically trip to the "OFF" position, interrupting the circuit and protecting connected equipment. The indicator window will show red.

6.3 Resetting the Circuit Breaker

After an automatic trip, identify and resolve the cause of the fault (e.g., remove overload, fix short circuit) before attempting to reset the breaker. Once the fault is cleared, push the toggle switch downwards to fully reset it, then push it upwards to the "ON" position.

8-rasm: Visual representation of the circuit breaker's indicator window, showing green for "ON" status and red for "OFF" status, providing clear operational feedback.

7. Xizmat ko'rsatish

The Renogy Suntree DC Circuit Breaker requires minimal maintenance. Regular inspections are recommended to ensure optimal performance and safety.

• Vaqti-vaqti bilan vizual tekshirish: Regularly check the circuit breaker for any signs of physical damage, discoloration, or loose connections.
• Tozalash: If necessary, gently clean the exterior of the circuit breaker with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• Funktsionallik testi: Periodically test the manual switching mechanism by turning the breaker OFF and ON.
• Ulanishni tekshirish: Barcha terminal ulanishlarining mahkamlanganligiga ishonch hosil qiling. Bo'shashgan ulanishlar qizib ketishga va potentsial xavflarga olib kelishi mumkin.

Note: Do not attempt to open or repair the circuit breaker. Refer to qualified personnel for any issues beyond basic inspection and cleaning.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

9. Kafolat va qo'llab-quvvatlash

Renogy products are manufactured with high-quality materials and craftsmanship. For specific warranty information, please refer to the warranty card included with your product or visit the official Renogy website. For technical support, product inquiries, or assistance with troubleshooting, please contact Renogy customer service through their official channels.

Renogy rasmiysi Websayt: www.renogy.com

Please have your model number (SUNDCCB32MN1P) and purchase date available when contacting support.