SUPERMICRO MBD-X12SPA-TF-O E-ATX Server anakarti foydalanuvchi uchun qo'llanma

1. Kirish

This manual provides detailed instructions for the installation, configuration, and operation of the Supermicro MBD-X12SPA-TF-O E-ATX Server Motherboard. Please read this manual thoroughly before proceeding with installation to ensure proper setup and functionality.

The Supermicro MBD-X12SPA-TF-O is an E-ATX server motherboard designed to support 3rd Gen Intel Xeon Scalable processors and Intel Xeon W-3300 processors with a single LGA-4189 socket. It features the Intel C621A chipset, extensive memory support up to 4TB DDR4-3200MHz, multiple PCIe 4.0 slots, and M.2 NVMe support with RAID capabilities.

2. Mahsulot tugadiview

The MBD-X12SPA-TF-O motherboard is engineered for high-performance server and workstation applications, offering robust connectivity and expansion options.

1-rasm: Tepadan pastga view of the Supermicro MBD-X12SPA-TF-O E-ATX Server Motherboard. This image displays the layout of the CPU socket, DIMM slots, PCIe slots, and various connectors.

Asosiy xususiyatlar:

• Protsessorni qo'llab-quvvatlash: Single Socket LGA-4189 (Socket P+) for 3rd Gen Intel Xeon Scalable processors and Intel Xeon W-3300 processors (up to 270W TDP).
• Chipset: Intel C621A.
• Xotira: 16 DIMM slots supporting up to 4TB 3DS ECC RDIMM/LRDIMM DDR4-3200MHz, and Intel Optane Persistent Memory.
• Kengaytirish uyalari: 4 PCIe 4.0 x16, 3 PCIe 4.0 x8 (in x16 slot).
• Saqlash: 4 PCIe 4.0 x4 M.2 slots (2260/2280/22110, M-Key) with RAID 0,1,5,10 support (VROC key required for RAID). 8 SATA3 (6 Gbps) ports via Intel C621A controller with RAID 0,1,5,10.
• Tarmoq: Dual LAN (Intel I210-AT, Marvell AQC113) plus dedicated IPMI LAN (Realtek RTL8211F PHY).
• Grafika: 1 VGA port dedicated for IPMI.

3. O'rnatish va o'rnatish

3.1 Xavfsizlik choralari

• Always disconnect the power cord from the power supply before handling any components.
• Elektrostatik zaryadsizlanish (ESD) shikastlanishining oldini olish uchun antistatik bilaguzuk taqing.
• Handle the motherboard by its edges, avoiding contact with components and connectors.
• Ensure proper ventilation in the server chassis.

3.2 Komponentlarni o'rnatish

1. CPU o'rnatish:

   Carefully align the 3rd Gen Intel Xeon Scalable or Intel Xeon W-3300 processor with the LGA-4189 socket. Ensure the triangular mark on the CPU aligns with the mark on the socket. Gently lower the CPU into the socket without forcing it. Secure the retention mechanism.

2. CPU sovutgichini o'rnatish:

   Apply thermal paste to the CPU surface if not pre-applied on the cooler. Mount the compatible LGA-4189 CPU cooler according to its manufacturer's instructions. Connect the CPU fan cable to the designated header on the motherboard.

3. Xotirani (RAM) o'rnatish:

   Open the clips on both ends of the DIMM slots. Align the memory module's notch with the key in the DIMM slot. Insert the module firmly until the clips snap into place. Refer to the motherboard's silkscreen for recommended DIMM population order for optimal performance (e.g., A1, B1, C1, D1 first).
4. M.2 NVMe SSD Installation:

   Locate the M.2 slots. Remove the M.2 standoff screw. Insert the M.2 SSD into the slot at a 30-degree angle. Push down the SSD and secure it with the standoff screw. Ensure proper thermal pad application if provided.

5. PCIe kartasini o'rnatish:

   Open the retention clip of the desired PCIe slot. Align the PCIe card with the slot and press it down firmly until it is fully seated. Secure the card with a chassis screw.

6. SATA disk ulanishi:

   Connect SATA data cables from your storage drives to the SATA3 ports on the motherboard. Connect power cables from the power supply to the SATA drives.
7. Quvvat manbaiga ulanish:

   Connect the 24-pin ATX main power connector and the 8-pin (or dual 8-pin) CPU power connectors from the power supply to the motherboard.

8. Old panel ulanishlari:

   Connect the front panel headers (power button, reset button, HDD LED, power LED, USB ports, audio) to their respective pins on the motherboard. Refer to the motherboard diagram for correct pin assignments.

4. Foydalanish bo'yicha ko'rsatmalar

4.1 Initial Power On and BIOS Setup

1. After all components are installed and connected, connect the power cord to the power supply and turn on the power switch.
2. Press the power button on the chassis.
3. During POST (Power-On Self-Test), press DEL or F2 (or as indicated on screen) to enter the BIOS/UEFI setup utility.
4. Configure boot order, enable/disable specific features, and set system time/date as needed. Save changes and exit BIOS.

4.2 Operatsion tizimni o'rnatish

Insert your operating system installation media (USB drive or DVD). Boot from the installation media and follow the on-screen prompts to install your preferred operating system (e.g., Windows Server, Linux distribution).

4.3 Drayv o'rnatish

After OS installation, install all necessary drivers for the motherboard chipset, LAN controllers, and any other integrated components. Drivers can typically be found on the Supermicro support webmaxsus modelingiz uchun sayt.

4.4 IPMI Remote Management

The motherboard features a dedicated IPMI LAN port for remote management. Connect an Ethernet cable to this port. Access the IPMI web a orqali interfeys web browser using the IP address assigned to the IPMI. Default login credentials are often provided in a separate IPMI manual or on the Supermicro website. IPMI allows for remote power control, system monitoring, and KVM-over-IP functionality.

5. Xizmat ko'rsatish

• Changni tozalash: Regularly clean dust from the motherboard, CPU cooler, and chassis fans using compressed air. Ensure the system is powered off and unplugged before cleaning.
• BIOS/Firmware Updates: Periodically check the Supermicro website for updated BIOS and firmware versions. Apply updates as recommended to improve stability, performance, and security. Follow the update instructions carefully.
• Kabelni boshqarish: Ensure all cables are neatly routed to promote optimal airflow and prevent interference.
• Atrof-muhit nazorati: Operate the server in a clean, temperature-controlled environment to prevent overheating and component degradation.

6. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Umumiy muammolar va echimlar:

• Quvvat yo'q:
  • Quvvat manbai ulangan va yoqilganligini tekshiring.
  • Verify all power cables (24-pin ATX, CPU 8-pin) are securely connected to the motherboard.
  • Ensure the front panel power button cable is correctly connected.
• Displey yo'q:
  • Ensure the monitor is connected to the correct video output (VGA for IPMI, or a dedicated GPU if installed).
  • Reseat memory modules and expansion cards.
  • Check CPU installation and cooler connection.
• Tizimning beqarorligi/halokatlar:
  • Check CPU and system temperatures. Ensure adequate cooling.
  • Verify memory modules are correctly installed and compatible. Run memory diagnostics.
  • BIOS va drayverlarni so'nggi versiyalarga yangilang.
  • Test components individually if possible (e.g., one RAM stick at a time).
• Storage Drive Not Detected:
  • Check SATA/M.2 cable connections.
  • Ensure drives are powered on.
  • Verify drive detection in BIOS/UEFI settings.
  • For M.2 RAID, ensure VROC key is installed and configured correctly.

For further assistance, refer to the Supermicro support websayti yoki texnik yordamiga murojaat qiling.

7. Texnik shartlar

8. Kafolat va qo'llab-quvvatlash

For warranty information and technical support, please visit the official Supermicro websaytiga tashrif buyuring yoki sotib olish nuqtangizga murojaat qiling. Kafolat talablari uchun sotib olish hujjatingizni saqlang.

Supermicro Official Websayt: www.supermicro.com