YITAMOTOR 3 Point Trailer Hitch

YITAMOTOR 3 Point Trailer Hitch with 2 Inch Receiver Instruction Manual

Model: 3 Point Trailer Hitch

Brend: YITAMOTOR

1. Xavfsizlik ma'lumotlari

Please read and understand all safety warnings and instructions before installing or operating this product. Failure to follow these instructions may result in serious injury or property damage.

  • Always wear appropriate personal protective equipment (PPE), including safety glasses and gloves, during installation and operation.
  • Ensure the tractor is turned off, in neutral, and the parking brake is engaged before attaching or detaching the hitch.
  • Verify that all pins and bolts are securely fastened before operating.
  • Do not exceed the maximum weight capacity of the hitch or your tractor's 3-point lift system.
  • Qo'l va oyoqlaringizni harakatlanuvchi qismlardan uzoqroq tuting.
  • Refer to your tractor's owner's manual for specific 3-point hitch operation guidelines.

For additional safety details, please consult the official Safety Information PDF.

2. Mahsulot tugadiview

The YITAMOTOR 3 Point Trailer Hitch is designed to convert your tractor's Category 1 three-point hitch into a standard 2-inch receiver, allowing for easy attachment of various implements such as trailers, tow hooks, and other compatible accessories.

Asosiy xususiyatlar:

  • Og'ir qurilish: Made from alloy steel for durability and strength.
  • Korroziyaga qarshilik: Features a black powder-coated finish to prevent rust and corrosion, suitable for outdoor use.
  • Category 1 Compatibility: Designed for Category 1 tractors, including models from Kubota, John Deere, Mahindra, Ford, Yanmar, Massey Ferguson, and New Holland.
  • 2-Inch Receiver: Standard 2-inch x 2-inch receiver for versatile attachment options.
  • 7/8-Inch CAT 1 Lifting Pin: Equipped with a 7/8-inch diameter CAT 1 lifting pin for secure attachment.
  • Oson o'rnatish: Designed for quick and straightforward attachment and removal.
YITAMOTOR 3 Point Trailer Hitch

Image: The YITAMOTOR 3 Point Trailer Hitch, showcasing its robust black powder-coated steel frame and pin connections.

Qutida nima bor:

  • 1 x 3 Point Trailer Hitch 2" Receiver Assembly
  • Necessary Pins and Clips for Attachment
Package Contents of YITAMOTOR 3 Point Trailer Hitch

Image: Diagram showing the main hitch assembly and included pins, clips, and bushings for installation.

3. O'rnatish va o'rnatish

Follow these steps to properly install the 3 Point Trailer Hitch onto your Category 1 tractor.

  1. Traktorni tayyorlash: Park the tractor on a level surface, engage the parking brake, and turn off the engine. Ensure the 3-point hitch arms are lowered.
  2. Attach Lower Lift Pins: Align the lower arms of your tractor's 3-point hitch with the lower pins on the YITAMOTOR hitch. Insert the pins through the tractor's lift arm holes and secure them with the provided clips.
  3. Attach Top Link Pin: Raise the tractor's 3-point hitch arms slightly to align the top link of the tractor with the upper mounting point of the YITAMOTOR hitch. Insert the top link pin and secure it with its clip.
  4. Ulanishlarni tekshirish: Double-check that all three connection points (two lower lift arms, one top link) are securely pinned and clipped. Ensure there is no excessive play.
  5. Sinov operatsiyasi: Slowly raise and lower the 3-point hitch to confirm proper movement and stability of the attached YITAMOTOR hitch.
3 Point Trailer Hitch installed on a tractor

Image: A YITAMOTOR 3 Point Trailer Hitch attached to the rear of a tractor, ready for use.

Batafsil view of hitch components

Rasm: yaqindan views highlighting the heavy-duty bolts, the 2-inch receiver, and the easy-to-install pin mechanism.

4. Foydalanish bo'yicha ko'rsatmalar

Once the YITAMOTOR 3 Point Trailer Hitch is securely installed, you can attach various implements to its 2-inch receiver.

  1. Attaching Implements: Insert the shank of your desired implement (e.g., trailer ball mount, tow hook) into the 2-inch receiver tube.
  2. Secure Implement: Align the pinholes and insert a hitch pin or locking pin (not included with this product) through the receiver and implement shank. Secure with a clip or lock.
  3. Balandlikni sozlash: Use your tractor's 3-point hitch controls to raise or lower the implement to the desired working height.
  4. Operatsiya: Operate your tractor and implement according to their respective instruction manuals. Always maintain a safe speed and be aware of your surroundings.
  5. Detaching Implements: Park the tractor, engage the parking brake, and turn off the engine. Lower the 3-point hitch to relieve tension. Remove the hitch pin securing the implement, then slide the implement out of the receiver.
2-inch receiver detail on tractor hitch

Rasm: yaqindan view of the 2-inch receiver integrated into the hitch, with an inset showing the 2"x2" dimension.

Tractor pulling a trailer with the hitch

Image: A green tractor utilizing the 3 Point Trailer Hitch to pull a small utility trailer.

5. Xizmat ko'rsatish

Regular maintenance will ensure the longevity and safe operation of your YITAMOTOR 3 Point Trailer Hitch.

  • Tozalash: After each use, clean the hitch to remove dirt, mud, and debris. A pressure washer can be used, but avoid directing high-pressure spray directly at pivot points or pins.
  • Tekshirish: Periodically inspect the hitch for any signs of wear, damage, cracks, or corrosion. Pay close attention to welds, pinholes, and the receiver tube.
  • Moylash: Apply a light coat of grease or lubricant to all pivot points and pins to ensure smooth operation and prevent rust.
  • Saqlash: When not in use, store the hitch in a dry, protected area to prevent exposure to elements that could cause rust or damage.
  • Uskuna tekshiruvi: Ensure all bolts and pins are tight and secure. Replace any worn or damaged hardware immediately.

6. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

This section addresses common issues you might encounter with your 3 Point Trailer Hitch.

MuammoMumkin sababYechim
Hitch is difficult to attach/detach.Misalignment with tractor arms; rust/debris on pins.Ensure tractor is on level ground. Clean and lubricate pins. Adjust tractor's 3-point arms for proper alignment.
Implement wobbles in receiver.Incorrectly sized implement shank; worn receiver or shank.Ensure implement shank is a standard 2-inch size. Inspect receiver and shank for wear; replace if necessary. Use a hitch tightener if minor play is acceptable.
Hitch pins are stuck.Rust or dirt buildup; bent pin.Clean pins thoroughly. Apply penetrating oil. If bent, replace the pin.
Visible damage or cracks on hitch.Overloading; impact damage; material fatigue.Darhol foydalanishni to'xtating. Do not attempt to repair structural damage. Replace the hitch.

7. Texnik shartlar

XususiyatSpetsifikatsiya
BrendYITAMOTOR
Model3 nuqtali treyler bog'chasi
MaterialQotishma po'lat
Tugatish turiChang bilan qoplangan (qora)
Qabul qiluvchining o'lchami2 dyuym x 2 dyuym
Traktor toifasi1-toifa
Lower Lift Pin Diameter7/8 dyuym
Element og'irligiTaxminan 27 funt
Paket o'lchamlariTaxminan 23.4 x 23 x 7.5 dyuym
Tortishish kuchi2500 Pounds Per Inch (Note: Actual towing capacity is limited by tractor and implement ratings)
Mahsulot o'lchamlari diagrammasi

Image: A diagram illustrating the key dimensions of the YITAMOTOR 3 Point Trailer Hitch, including height, width, and receiver size.

8. Kafolat va qo'llab-quvvatlash

For warranty information, product support, or to purchase replacement parts, please contact YITAMOTOR customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.

You can often find support information on the official YITAMOTOR websayt yoki mahsulot sotib olingan chakana sotuvchi orqali.

Tegishli hujjatlar - 3 nuqtali treyler bog'chasi

Oldindanview YITAMOTOR 5 FT Notched Disc Harrow Plow Assembly Instructions
Assembly instructions for the YITAMOTOR 5 FT Notched Disc Harrow Plow, compatible with Cat0&1 implements for various tractor brands.
Oldindanview YITAMOTOR 3 Point Hitch Receiver Assembly Instructions & Operator's Manual
Detailed assembly instructions and operator's manual for the YITAMOTOR 3 Point Hitch Receiver Tractor Drawbar Attachment. Includes safety warnings, liability disclaimers, and part identification.
Oldindanview YITAMOTOR 3 nuqtali pichan nayzasini yig'ish bo'yicha ko'rsatmalar va foydalanuvchi qo'llanmasi | 1-toifali traktor, 3000 funt sig'im
Detailed assembly instructions and operator's manual for the YITAMOTOR 3 Point Hay Bale Spear. Includes part descriptions, safety warnings, risk acknowledgement, and contact information for Cat 1 tractors with a 3000lb lift capacity.
Oldindanview YITAMOTOR 2" Trailer Hitch Receiver Dual Pallet Forks Adapter Attachment Assembly Instructions
Step-by-step assembly instructions for the YITAMOTOR 2" Trailer Hitch Receiver Dual Pallet Forks Adapter Attachment. Includes parts list and installation guide.
Oldindanview Pure & Easy Assembly Instructions for YITAMOTOR 3 Point Landscape Rock Rake
Detailed assembly instructions for the Pure & Easy Landscape Rock Rake attachment by YITAMOTOR. Includes a comprehensive parts list, step-by-step assembly guidance, and important notices for proper installation.
Oldindanview YITAMOTOR Clamp On Trailer Hitch Device Assembly Instructions and Safety Guide
Comprehensive assembly instructions, safety precautions, and operational guidance for the YITAMOTOR® Clamp On Trailer Hitch Device, ensuring safe and proper installation and use.