1. Kirish
This manual provides essential information for the safe installation, operation, and maintenance of your Philips LED Slim Flood Light, model PTF150-NW-G1-Y-FL-8-BZ. Please read this manual thoroughly before installation and retain it for future reference.
The Philips LED Slim Flood Light is designed for outdoor applications such as sign lighting, building facades, security lighting, and general area illumination. Its robust construction and efficient LED technology ensure reliable performance.
2. Xavfsizlik ma'lumotlari
WARNING: Risk of electric shock. Installation should be performed by a qualified electrician or trained personnel in accordance with all applicable electrical codes.
- O'rnatish yoki xizmat ko'rsatishdan oldin elektron to'xtatuvchi yoki sug'urta qutisidagi quvvatni o'chiring.
- Ta'minot hajmini ta'minlangtage armatura talablariga mos keladi (120V AC).
- Jihozni shikastlangan simlar yoki komponentlar bilan ishlatmang.
- Avoid direct eye exposure to the light source when illuminated.
- The fixture's housing acts as a heat sink and may become hot during operation. Allow adequate cooling time before handling.
- Ensure all connections are secure and properly sealed, especially the IP66 liquid-tight connector for the power cord, to maintain water resistance.
- Armaturani o'zgartirmang. Har qanday o'zgartirish kafolatni bekor qilishi va xavfsizlik uchun xavf tug'dirishi mumkin.
3. Paket tarkibi
O'rnatishni boshlashdan oldin barcha komponentlar mavjudligini tekshiring:
- Philips LED Slim Flood Light (1 unit)
- Integrated Yoke Mount (pre-attached)
- Power Cord (3-foot, STW 16 gauge)
- IP66 Liquid Tight Connector (pre-attached to cord exit)
1-rasm: Philips LED Slim Flood Light. This image shows the front view of the flood light with its integrated yoke mount and power cord connection point.
4. Texnik shartlar
| Spetsifikatsiya | Tafsilot |
|---|---|
| Model raqami | PTF150-NW-G1-Y-FL-8-BZ |
| Brend | Signify (Philips) |
| Wattage | 150 vatt |
| Lumen chiqishi | 18600 lumen |
| Rang harorati | 4000K sovuq oq |
| Samaradorlik | Vatt uchun 124 lumen |
| jildtage | 120 volt (AC) |
| O'rnatish turi | Yoke Mount (Surface Mount) |
| Tugatish | Bronza |
| Material | Die-cast aluminum housing, tempered glass lens |
| Kirish himoyasi (IP) reytingi | IP65 (fixture), IP66 (connector) |
| Element og'irligi | 4 funt |
| Olchamlari (taxminan) | 16.93" H x 11.41" W x 2.36" D (430mm H x 289.8mm W x 59.9mm D) |
5. O'rnatish va o'rnatish
The Philips LED Slim Flood Light is designed for surface mounting using its integrated yoke. Follow these steps for proper installation:
- Tayyorlanishi: Ensure power is disconnected at the main circuit breaker. Gather necessary tools (drill, screwdriver, wire strippers, electrical tape, mounting hardware suitable for your surface).
- O'rnatish joyi: Select a sturdy surface (wall, pole, ground) capable of supporting the fixture's weight and providing adequate clearance for light distribution.
- Belgilash va burg'ulash: Use the yoke mount as a template to mark the drilling points on the mounting surface. Drill appropriate pilot holes for your chosen mounting hardware. Refer to the dimension diagram for precise measurements.
- Jihozni mahkamlang: Attach the yoke mount securely to the prepared surface using appropriate screws or bolts (not included). Ensure the fixture is stable and cannot vibrate loose. The yoke includes a bolt to lock in the aiming angle after adjustment.
- Elektr aloqasi:
- The fixture comes with a 3-foot watertight STW 16 gauge cord exiting the housing via an IP66 liquid-tight connector.
- Connect the fixture's power cord to your main power supply wiring. This connection must be made by a qualified electrician and comply with all local and national electrical codes.
- Ensure all wire connections are properly insulated and protected from moisture.
- Aiming Adjustment: Loosen the bolt on the yoke mount, adjust the flood light to the desired aiming angle, and then securely tighten the bolt to lock the position.
- Quvvatni tiklash: O'rnatish tugallangandan va barcha ulanishlar xavfsiz bo'lgandan so'ng, o'chirgichdagi quvvatni tiklang.
2-rasm: Philips LED Slim Flood Light Dimension Diagram. This diagram provides detailed measurements for the flood light, including height, width, depth, and mounting hole spacing, crucial for accurate installation.
6. Foydalanish bo'yicha ko'rsatmalar
The Philips LED Slim Flood Light operates upon receiving power. There are no user-adjustable controls on the fixture itself.
- Quvvatni yoqish/oʻchirish: Control the light by switching the connected power circuit on or off. This can be done via a wall switch, timer, or photocell (not included).
- Avtomatik ishlash: For automated operation, connect the flood light to an external timer, motion sensor, or photocell switch (purchased separately) according to their respective installation instructions.
7. Xizmat ko'rsatish
The Philips LED Slim Flood Light is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.
- Tozalash: Ob'ektiv va korpusni vaqti-vaqti bilan yumshoq, d bilan tozalang.amp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents, as these can damage the finish or lens. Ensure power is off before cleaning.
- Tekshirish: Annually inspect the fixture for any signs of damage, loose connections, or wear on the power cord. Address any issues promptly.
- Komponentni almashtirish: The LED light source is integrated and not user-replaceable. If the fixture malfunctions, contact customer support.
8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
If your Philips LED Slim Flood Light is not functioning as expected, refer to the following common issues and solutions:
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| Chiroq yoqilmaydi. | Armatura uchun kuch yo'q. Bo'shashgan simli aloqa. Faulty circuit breaker/fuse. | Elektr ta'minotini tekshiring. Verify all wiring connections are secure (consult a qualified electrician). O'chirish to'xtatuvchisini qayta o'rnating yoki sug'urta o'zgartiring. |
| Yorug'lik miltillaydi yoki xira. | Inconsistent power supply. Bo'shashgan simlar. Fixture damage. | Ensure stable power. Simli ulanishlarni tekshiring. If damage is suspected, discontinue use and contact support. |
| Armatura ichidagi suv. | Improperly sealed connections. Damaged housing/lens. | Immediately disconnect power. Inspect and re-seal all connections, especially the IP66 connector. If housing or lens is damaged, the IP rating may be compromised; contact support. |
Agar muammoni bartaraf etish bo'yicha choralar muammoni hal qilmasa, mijozlarni qo'llab-quvvatlash xizmatiga murojaat qiling.
9. Kafolat va qo'llab-quvvatlash
For warranty information and technical support, please refer to the official Signify (Philips) websaytga yoki mijozlarga xizmat ko'rsatish bo'limiga murojaat qiling. Xarid kvitansiyasini xaridni tasdiqlovchi hujjat sifatida saqlang.
Ishlab chiqaruvchi: Belgilash
Model raqami: PTF150-NW-G1-Y-FL-8-BZ
Bog'lanish uchun ma'lumot: Please visit the official Signify webeng so'nggi aloqa ma'lumotlari va qo'llab-quvvatlash manbalari uchun sayt.
