darkFlash Aquarius Mesh Computer Case User Manual

1. Kirish

This manual provides detailed instructions for the installation, operation, and maintenance of your darkFlash Aquarius Mesh Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use of your new computer chassis.

2. Xavfsizlik ma'lumotlari

Har doim quyidagi xavfsizlik choralariga rioya qiling:

• Disconnect all power sources before installing or removing any components.
• Komponentlarga elektrostatik zaryadsizlanish (ESD) zararlanishining oldini olish uchun antistatik bilaguzuk taqing.
• Jismoniy shikastlanishdan saqlanish uchun komponentlarni ehtiyotkorlik bilan ishlating.
• Kichik qismlar va asboblarni bolalardan uzoqroq tuting.
• Ensure proper ventilation around the computer case.

3. Paket tarkibi

Paketingizda barcha narsalar mavjudligini tekshiring:

• darkFlash Aquarius Mesh Computer Case
• Aksessuarlar qutisi (vintlar, mahkamlagichlar, kabel bog'ichlari va boshqalar)
• Foydalanuvchi uchun qo'llanma (ushbu hujjat)

4. O'rnatish va o'rnatish

Follow these steps for proper component installation.

4.1. Ishni tayyorlash

Before installing components, remove the side panels. The Aquarius Mesh case typically features a tempered glass side panel and a solid metal panel.

1. Locate the thumbscrews on the rear of the case securing the side panels.
2. Unscrew the thumbscrews and carefully slide the panels backward, then lift them off.

1-rasm: old va yon view of the darkFlash Aquarius Mesh case. Note the mesh front panel and tempered glass side panel.

2-rasm: orqa view of the darkFlash Aquarius Mesh case, showing expansion slots and rear fan mount.

4.2. Ana platani o'rnatish

The Aquarius Mesh supports ATX, Micro-ATX, and Mini-ITX motherboards.

1. Install the I/O shield into the cutout at the rear of the case.
2. Align your motherboard with the pre-installed standoffs. Ensure the I/O ports align with the I/O shield.
3. Secure the motherboard with the appropriate screws from the accessory box.

3-rasm: ichki qism view of the darkFlash Aquarius Mesh case, highlighting the motherboard tray and cable routing options.

4.3. Elektr ta'minoti blokini (PSU) o'rnatish

PSU korpusning pastki orqa tomoniga o'rnatiladi.

1. Slide the PSU into its designated compartment from the rear of the case.
2. Align the screw holes and secure the PSU with screws.

4.4. Saqlash diskini o'rnatish

The case provides mounting options for 3.5-inch HDDs and 2.5-inch SSDs.

• 3.5 dyuymli qattiq disklar: Locate the drive cage usually beneath the PSU shroud or behind the motherboard tray. Slide the HDD into the bay and secure it with screws.
• 2.5 dyuymli SSD disklar: Mount SSDs to dedicated brackets behind the motherboard tray or on the PSU shroud. Secure with screws.

4-rasm: Orqa ichki qism view of the darkFlash Aquarius Mesh case, showing the motherboard cutout and potential SSD mounting points.

4.5. Expansion Card Installation (e.g., GPU)

1. Korpusning orqa qismidan kerakli kengaytirish uyasi qopqoqlarini olib tashlang.
2. Insert the expansion card into the appropriate PCIe slot on the motherboard.
3. Secure the card with the provided screws or retention clips.

4.6. Kabellarni boshqarish

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

4.7. Reassembling the Case

Once all components are installed and cables are managed:

1. Carefully reattach the side panels, ensuring they slide into place correctly.
2. Secure the side panels with the thumbscrews.

5. Foydalanish bo'yicha ko'rsatmalar

After assembly, connect your peripherals and power cable.

1. Connect your monitor, keyboard, mouse, and other peripherals to the motherboard's I/O ports.
2. Quvvat simini quvvat manbaiga va devordagi rozetkaga ulang.
3. Press the power button located on the top panel of the case to start your computer.

5-rasm: Yuqori view of the darkFlash Aquarius Mesh case, showing the front I/O panel with power button, reset button, USB ports, and audio jacks.

6. Xizmat ko'rsatish

Doimiy texnik xizmat ko'rsatish kompyuteringiz komponentlarining optimal ishlashini va uzoq umr ko'rishini ta'minlaydi.

• Chang filtrlari: The Aquarius Mesh case features removable dust filters (e.g., on the front, top, and bottom). Regularly remove and clean these filters with water and mild soap, or by vacuuming, to maintain good airflow. Ensure they are completely dry before reinstallation.
• Ichki tozalash: Periodically open the case and use compressed air to remove dust buildup from fans, heatsinks, and other components.
• Tashqi tozalash: Tashqi yuzalarni yumshoq mato bilan artib oling, damp mato. Qattiq kimyoviy moddalardan saqlaning.

7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues, consider the following common solutions:

• Quvvat yo'q:
  • Ensure the PSU switch is in the 'ON' position.
  • Anakart va uning qismlariga ulangan barcha quvvat ulanishlarini tekshiring.
  • Verify the power cable is securely plugged into the wall outlet and PSU.
• Muxlislar aylanmayapti:
  • Check fan connections to the motherboard or fan controller.
  • Ensure fans are not obstructed by cables or dust.
• Front Panel I/O Not Working:
  • Verify that the front panel connectors (USB, audio, power/reset switches) are correctly connected to the motherboard headers. Refer to your motherboard manual for header locations.

8. Texnik shartlar

9. Kafolat va qo'llab-quvvatlash

For warranty information or technical support, please refer to the official darkFlash websayt yoki mijozlarga xizmat ko'rsatish bilan bog'laning. Kafolat da'volari uchun xaridingizni tasdiqlovchi hujjatingizni saqlang.

Qo'shimcha yordam uchun siz tashrif buyurishingiz mumkin darkFlash official websayt.