1. Kirish
This manual provides comprehensive instructions for the BN-LINK CP-U208D 24-Hour Mechanical Dual Outlet Timer. This device is designed to automate the on/off cycles of electrical appliances, offering convenience and potential energy savings. Please read this manual thoroughly before use to ensure proper operation and safety.
2. Xavfsizlik bo'yicha muhim ma'lumotlar
- Faqat ichki foydalanish uchun. Suv yoki namlikka ta'sir qilmang.
- Do not exceed the electrical ratings of 125VAC, 60 Hz, 1875W, 15A (Resistive/Tungsten), and 1/2HP.
- Ensure the timer is securely plugged into a grounded outlet.
- Do not use with appliances that could cause a hazardous condition if left unattended, such as heating appliances without automatic shut-off.
- Bolalar qo'li etmaydigan joyda saqlang.
- Do not disassemble or attempt to repair the unit. Refer to qualified service personnel.
3. Mahsulot tugadiview
The BN-LINK CP-U208D timer features a mechanical dial for setting schedules and dual grounded outlets for connecting two devices simultaneously. It includes a bypass switch for manual control.
Figure 1: BN-LINK CP-U208D Mechanical Dual Outlet Timer
Komponentlar:
- 24 soatlik qo'ng'iroq: Displays time in 30-minute increments.
- Program Pins: Small segments around the dial. Each segment represents 30 minutes.
- Joriy vaqt ko'rsatkichi: An arrow pointing to the current time on the dial.
- Ikkita yerga ulangan rozetkalar: Two 3-prong outlets for connecting appliances.
- Bypass Switch (ON/TIMER/OFF): Allows manual control or timer activation.
4. O'rnatish bo'yicha ko'rsatmalar
Step 1: Set ON/OFF Times
The timer dial has 48 pins, each representing a 30-minute interval. To set your desired ON/OFF schedule:
- Push the pins PASTGA for the periods you want the connected appliance to be ON.
- Iplarni qoldiring UP for the periods you want the connected appliance to be O'CHIRIB.
The timer comes with all pins initially in the DOWN position. Pull up the pins for the times you want the device to be off.
Figure 2: Setting ON/OFF Times
Step 2: Set Current Time
Rotate the entire dial clockwise until the current time aligns with the arrow labeled 'Current Time' or 'Time Now'. Ensure you distinguish between AM and PM hours.
Step 3: Set Bypass Switch
Locate the switch on the side of the timer. Set it to the 'TIMER' position (represented by a clock icon) for the programmed schedule to activate. You can also set it to 'ON' for continuous power or 'OFF' to cut power completely, overriding the timer function.
Figure 3: Complete Setup Steps
Step 4: Plug in Appliances
Plug the BN-LINK timer into a standard 3-prong grounded wall outlet. Then, plug your appliances into the dual grounded outlets on the timer.
5. Taymerni ishlatish
Once the timer is set and the bypass switch is in the 'TIMER' position, the dial will continuously rotate, activating and deactivating connected appliances according to your programmed schedule. The schedule will repeat daily without needing to be reset.
Qo'lda bekor qilish
To temporarily override the programmed schedule, use the bypass switch:
- Set to 'ON' for continuous power to the connected devices.
- Set to 'OFF' to cut power to the connected devices.
- Return to 'TIMER' to resume the programmed schedule.
6. Tavsiya etilgan ilovalar
The BN-LINK CP-U208D timer is versatile and suitable for various indoor appliances, helping to automate your home and save energy.
Figure 4: Applicable Appliances
- Indoor Lighting (lamps, holiday lights)
- Muxlislar
- Kofe mashinalari
- O'sish chiroqlari
- Akvarium nasoslari
- Namlagichlar
Figure 5: Timer in Various Home Settings
Figure 6: Space-Saving Design
7. Mahsulot spetsifikatsiyalari
| Spetsifikatsiya | Qiymat |
|---|---|
| Model raqami | CP-U208D |
| jildtage | 125VAC |
| Chastotasi | 60 Gts |
| Max Load (Resistive & Tungsten) | 1875 Vt, 15A |
| Motor reytingi | 1/2 ot kuchi |
| Sozlamalar soni | 48 (30-minute intervals) |
| Olchamlari (D x G x Y) | 2.6"D x 1.61"W x 3.15"Y |
| Material | Polikarbonat |
| Rang | Oq |
| Element og'irligi | 5.6 untsiya |
8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
Timer Not Turning On/Off at Programmed Times:
- Check Pins: Ensure pins are correctly pushed DOWN for ON times and UP for OFF times.
- Verify Current Time: Make sure the dial is rotated so the current time aligns with the 'Current Time' arrow.
- Bypass Switch Position: Confirm the side switch is set to the 'TIMER' position (clock icon).
- Quvvatlantirish manbai: Ensure the timer is securely plugged into a live, functioning wall outlet.
Timer Runs Continuously (Does Not Turn Off):
- Bypass kaliti: Check if the bypass switch is accidentally set to 'ON'.
- Pinlar: All pins might be pushed down. Pull up pins for desired OFF periods.
Timer Makes a Low Humming Noise:
A slight humming sound is normal for mechanical timers as the internal motor operates. If the noise is excessively loud or unusual, discontinue use and contact customer support.
9. Kafolat va mijozlarni qo'llab-quvvatlash
The BN-LINK CP-U208D 24-Hour Mechanical Dual Outlet Timer is backed by a 12-month warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For technical assistance, warranty claims, or any questions regarding your product, please contact BN-LINK professional customer service. Refer to the product packaging or the BN-LINK official webjoriy aloqa ma'lumotlari uchun sayt.
