1. Kirish
The UNI-T UT202R is a high-precision digital clamp meter designed for accurate electrical measurements. It features automatic ranging, True RMS capabilities, and a clear LCD backlight display. This manual provides essential information for the safe and effective operation of your device.
2. Xavfsizlik ma'lumotlari
Always adhere to local and national safety codes. Use appropriate personal protective equipment (PPE) such as insulated gloves and eye protection. Do not attempt to measure voltages or currents exceeding the specified maximum ratings. Ensure the device is in good working condition before use. Refer to the safety markings on the device and in the full product documentation.
- CAT III 300V / CAT II 600V: Indicates the measurement category and maximum voltage xavfsiz ishlash uchun.
- Agar shikastlangan bo'lsa, foydalanmang: Inspect the meter and test leads for any damage before each use.
- Nam sharoitlardan saqlaning: Do not operate the meter in wet environments.
- Batareya xavfsizligi: Batareya pastligi indikatori paydo bo'lganda batareyalarni almashtiring.
3. Mahsulot tugadiview
3.1. Qismlar
Rasm: batafsil view of the UNI-T UT202R Digital Clamp Meter with labels pointing to its various parts, including the clamp head, NCV sensor, NCV warning lamp, function turntable, function switch button, LED display, relative value button, Max/Min button, data hold/backlight button, black probe socket, and red probe socket.
- Clamp Bosh: Used for non-contact current measurement.
- NCV sensori: Kontaktsiz jildtage aniqlash.
- NCV Warning Lamp: Illuminates during NCV detection.
- Tong Head Trigger: Opens the clamp jag'.
- Function Turntable (Dial): Selects measurement modes.
- Function Switch Button (SELECT): Toggles between functions within a dial setting.
- LED displeyi: High-definition display for measurement readings.
- REL/Zero Button: For relative measurement or zeroing.
- MAX/MIN tugmasi: Records maximum and minimum values.
- HOLD/Backlight Button: Freezes the display reading or activates backlight.
- Probe Sockets (COM, VΩHz): Vol uchun sinov simlarini ulangtage, resistance, frequency, and other measurements.
3.2. Displey xususiyatlari
- LCD HD Display: Aniq va oson o'qiladigan o'lchovlarni ta'minlaydi.
- Orqa yorug'lik funktsiyasi: Kam yorug'lik sharoitida ko'rinishni yaxshilaydi.
- Larger Screen and Display Digits: Improves readability of measurement values.
4. Sozlash
4.1. Batareyani o'rnatish
The UNI-T UT202R requires 2 AA batteries (included). To install or replace batteries:
- Hisoblagich O'CHIQ ekanligiga ishonch hosil qiling.
- Qurilmaning orqa tarafidagi batareya qopqog'ini toping.
- Batareya qopqog'ini ochish uchun tornavida foydalaning.
- Insert the 2 AA batteries, observing correct polarity (+/-).
- Batareya qopqog'ini mahkam yoping.
5. Foydalanish bo'yicha ko'rsatmalar
This section details the various measurement functions of the UNI-T UT202R Digital Clamp Meter. Always select the appropriate function on the dial before making any measurements.
5.1. AC oqimini o'lchash
To measure AC current, rotate the function dial to the 'A~' position. Open the clamp jaw using the trigger and enclose a single conductor. The display will show the AC current reading. The meter supports selectable frequency for AC current measurements.
Video: Demonstration of AC current measurement using the clamp meter on an electrical panel, showing the current reading on the display. The video also highlights selectable frequency.
5.2. AC jildtage O'lchov
AC hajmini o'lchash uchuntage, rotate the function dial to the 'V~' position. Connect the red test lead to the VΩHz input jack and the black test lead to the COM input jack. Apply the test leads across the circuit points to measure AC voltage. The meter supports selectable frequency for AC voltage o'lchovlar.
Video: Demonstration of AC voltage measurement using test leads on an electrical panel, showing the voltage reading on the display. The video also highlights selectable frequency.
5.3. DC jildtage O'lchov
DC hajmini o'lchash uchuntage, rotate the function dial to the 'V=' position. Connect the red test lead to the VΩHz input jack and the black test lead to the COM input jack. Apply the test leads across the circuit points to measure DC voltage. This is demonstrated on a car battery and an electric bicycle battery.
Video: Demonstration of DC voltage measurement on a car battery and an electric bicycle battery, showing the voltage readings on the display.
5.4. Qarshilikni o'lchash
To measure resistance, rotate the function dial to the 'Ω' position. Connect the test leads across the component to be measured. The display will show the resistance value in Ohms (Ω).
Video: Demonstration of resistance measurement on a circuit board, showing the resistance value on the display.
5.5. Diyotni o'lchash
To test diodes, rotate the function dial to the 'Diode' symbol position. Connect the test leads across the diode. A healthy diode will show a voltage drop in one direction and an open circuit (OL) in the reverse direction.
Video: Demonstration of diode measurement on a circuit board, showing the voltage drop reading on the display.
5.6. Uzluksizlik testi
To perform a continuity test, rotate the function dial to the 'Continuity' symbol position. Connect the test leads across the circuit or component. The meter will emit an audible beep if continuity is detected (low resistance).
Video: Demonstration of a continuity test using test leads on a wire, showing the audible beep and display reading for continuity.
5.7. Imkoniyatlarni o'lchash
To measure capacitance, rotate the function dial to the 'Capacitance' symbol position. Connect the test leads across the capacitor. The display will show the capacitance value. The UT202R supports capacitance measurement up to 4mF.
Video: Demonstration of capacitance measurement on a capacitor, showing the capacitance value on the display.
5.8. Haroratni o'lchash
To measure temperature, rotate the function dial to the 'Temperature' symbol position. Connect a K-type thermocouple (not included) to the meter. Place the thermocouple tip on the object or area to be measured. The display will show the temperature reading. The UT202R supports temperature measurement from -40°C to 1000°C.
Video: Demonstration of temperature measurement using a thermocouple on an air conditioning unit, showing the temperature reading on the display.
5.9. Chastotani o'lchash
To measure frequency, rotate the function dial to the 'Hz%' position. Connect the test leads to the circuit. The display will show the frequency value. The UT202R supports frequency measurement up to 10MHz.
Video: Demonstration of low voltage frequency measurement using a signal generator, showing the readings on the display.
5.10. Kontaktsiz jildtage (NCV) Measurement
To detect AC voltage without contact, rotate the function dial to the 'NCV' position. Bring the NCV sensor near the conductor. The NCV warning lamp will illuminate, and the meter will beep, indicating the presence of AC voltage. The UT202R features 4-level NCV measurement for varying signal strengths.
Video: Demonstration of 4-level NCV measurement on electrical busbars, showing the NCV indicator and audible alerts.
5.11. Current Usage with Splitter (Optional Accessory)
For convenient measurement of home appliance current usage, the UT200+ series can be used with a splitter (e.g., UNI-T UT-LS15-US, sold separately). This accessory separates the live and ground wires, allowing the clamp meter to accurately measure the current of a plugged-in appliance.
Video: Demonstration of measuring current usage of a home appliance using the clamp meter with a UT-LS15-US splitter.
6. Texnik shartlar
The following table outlines the key specifications for the UNI-T UT202R Digital Clamp Taymer.
Image: Detailed specifications table for the UT200+ and UT200R series, including AC current, AC current frequency response, DC current, AC voltage, AC jildtage frequency response, high voltage frequency, DC voltage, resistance, capacitance, temperature, frequency, display count, jaw opening, relative mode, zero mode, and category ratings.
Image: Table outlining features such as auto range, True RMS, continuity test, diode, low battery indication, data hold, Max/Min, and auto power off. Also includes characteristics like standard accessories, batteries, display, product size, product net weight, standard individual packing, standard quantity per carton, standard carton measurement, and standard carton gross weight.
| Parametr | Qiymat |
|---|---|
| Model raqami | UT202R |
| O'zgaruvchan tok (A) | 400A |
| doimiy oqim (A) | Mavjud emas |
| AC jildtage (V) | 600V |
| DC voltage (V) | 600V |
| Qarshilik (Ω) | 40 MŌ |
| Imkoniyatlar (F) | 4 mF |
| Harorat (°C) | -40°C~1000°C |
| Chastotasi (Hz) | 10Hz ~ 10MHz |
| Displey soni | 4000 |
| Jag'ning ochilishi | 28 mm |
| Haqiqiy RMS | Ha |
| Orqa yorug'lik | Ha |
| Quvvat manbai | 2 ta AA batareyasi (shu jumladan) |
| Sertifikatlar | Idoralar, UKCA, cETLus |
7. Xizmat ko'rsatish
To ensure the longevity and accuracy of your UNI-T UT202R Digital Clamp Meter, follow these maintenance guidelines:
- Tozalash: Hisoblagichni quruq, yumshoq mato bilan artib oling. Aşındırıcılar yoki erituvchilardan foydalanmang.
- Saqlash: Hisoblagichni to'g'ridan-to'g'ri quyosh nuri va haddan tashqari haroratdan uzoqda, salqin, quruq joyda saqlang. Agar uzoq vaqt saqlasangiz, batareyalarni chiqarib oling.
- Kalibrlash: For professional applications, periodic calibration by qualified personnel is recommended to maintain accuracy.
- Sinov rahbarlari: Inspect test leads regularly for cuts, cracks, or damaged insulation. Replace immediately if any damage is found.
8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
If you encounter issues with your UNI-T UT202R, refer to the following common troubleshooting steps:
- Displey yo'q / zaif displey: Check battery installation and replace batteries if necessary. Ensure the meter is turned ON.
- Noto'g'ri o'qishlar:
- Ensure the correct measurement function is selected.
- Verify test lead connections are secure and undamaged.
- Check for proper contact with the circuit or component.
- Oqimni o'lchash uchun faqat bitta o'tkazgich kontakt ichida ekanligiga ishonch hosil qilingamp jag'.
- "OL" (ortiqcha yuklanish) displeyi: The measured value exceeds the selected range. Switch to a higher range or ensure the measurement is within the meter's capabilities.
- Uzluksiz signal yo'q: Check if the circuit is truly continuous or if the resistance is too high for the continuity threshold.
If problems persist, contact UNI-T customer support or a qualified technician.
9. Kafolat va qo'llab-quvvatlash
For warranty information and technical support, please refer to the official UNI-T websaytga kiring yoki mahalliy distribyutoringizga murojaat qiling. Kafolat da'volari uchun xarid kvitansiyasini xaridni tasdiqlovchi hujjat sifatida saqlang.
