Kirish
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Sharp XE-A207B Electronic Thermal Cash Register. Please read this manual thoroughly before using the device to ensure proper functionality and longevity. Keep this manual for future reference.
Figure 1: Sharp XE-A207B Electronic Thermal Cash Register. This image shows the complete unit, including the main register body, integrated thermal printer, customer display, operator display, and cash drawer.
1. O'rnatish va dastlabki konfiguratsiya
1.1 Paketni ochish va tekshirish
Carefully remove all components from the packaging. Verify that all items listed in the packing list are present and undamaged. Retain the packaging for future transport or storage.
1.2 Quvvatga ulanish
- Ensure the cash register is placed on a stable, flat surface.
- Connect the power cord to the power input port on the rear of the cash register.
- Elektr shnurining ikkinchi uchini yerga ulangan elektr rozetkaga ulang.
- Turn on the main power switch, typically located on the side or rear of the unit.
1.3 Qog'oz rulosini o'rnatish
- Open the printer cover by lifting the latch.
- Insert a new thermal paper roll, ensuring the paper feeds from the bottom and the leading edge is straight.
- Pull a small amount of paper past the cutting edge.
- Printer qopqog'ini joyiga chertayotgan tovush chiqquncha mahkam yoping.
1.4 Initial Date and Time Setting
Upon first power-on, the register may prompt for date and time settings. Follow the on-screen instructions or refer to the programming section for detailed steps on setting the correct date and time.
1.5 Cash Drawer Connection
Connect the cash drawer cable to the designated port on the rear of the cash register. The cash drawer will automatically open during specific transactions (e.g., cash sales, no-sale operations).
2. Foydalanish bo'yicha ko'rsatmalar
2.1 Basic Sales Transaction
- Turn the Mode Switch to the REG (Register) position.
- Raqamli klaviatura yordamida mahsulot narxini kiriting.
- Press the appropriate Department key (e.g., DEPT 1). Repeat for additional items.
- To finalize the sale, press the JAMI kalit.
- Mijozdan olingan miqdorni kiriting.
- ni bosing NAQD PUL key. The register will print a receipt and display the change due.
2.2 Using PLU (Price Look-Up) Items
For items programmed with PLU codes:
- Turn the Mode Switch to REG.
- Enter the PLU number.
- ni bosing PLU key. The item's pre-programmed price will be registered.
- Proceed with the transaction as described in Section 2.1.
2.3 Voiding and Refunds
- Voiding an Item (before TOTAL): Enter the item price, press the Department key, then press the VOID kalit.
- Refund (after TOTAL): Turn the Mode Switch to QAYTA BERISH (if available) or REG va foydalaning QAYTA BERISH function. Enter the amount to be refunded and press the NAQD PUL key. Consult the programming guide for specific refund procedures.
2.4 Daily Reports (X-Report and Z-Report)
- X-Report (Reading Report): Provides a current summary of sales without clearing totals. Turn the Mode Switch to X, keyin tugmasini bosing JAMI kalit.
- Z-Report (Reset Report): Clears daily sales totals and prints a comprehensive summary. This report should be run at the end of each business day. Turn the Mode Switch to Z, keyin tugmasini bosing JAMI kalit.
3. Xizmat ko'rsatish
3.1 Jihozni tozalash
Regular cleaning helps maintain the performance and appearance of your cash register.
- Tozalashdan oldin elektr simini ajratib oling.
- Tashqi yuzalarni yumshoq mato bilan artib oling, damp mato. Abraziv tozalash vositalarini yoki erituvchilarni ishlatmang.
- Use a soft brush or compressed air to remove dust and debris from the keypad and printer area.
- Clean the thermal print head periodically with a specialized thermal printer cleaning pen or isopropyl alcohol on a cotton swab. Allow to dry completely before use.
3.2 Qog'oz rulosini almashtirish
Refer to Section 1.3 for detailed instructions on replacing the thermal paper roll.
4. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
This section addresses common issues you might encounter with your Sharp XE-A207B cash register. For problems not listed here, contact customer support.
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| Ro'yxatdan o'tish yoqilmaydi. | Power cord disconnected; power switch off; power outlet issue. | Elektr simining ulanishini tekshiring; quvvat tugmasi yoqilganligiga ishonch hosil qiling; rozetkani boshqa qurilma bilan tekshiring. |
| Printer not printing or printing faintly. | Paper roll empty or incorrectly installed; non-thermal paper used; print head dirty. | Replace paper roll correctly (ensure thermal side is facing print head); use thermal paper only; clean print head. |
| Cash drawer does not open. | Drawer not connected; drawer lock engaged; mechanical obstruction. | Verify drawer cable connection; ensure drawer is unlocked; check for obstructions inside or around the drawer. |
| Displeyda xato xabari. | Operational error; programming error. | Refer to the specific error code in the full programming manual (if available) or restart the unit. |
5. Texnik shartlar
The following are key specifications for the Sharp XE-A207B Electronic Thermal Cash Register:
- Model: XE-A207B
- Brend: O'tkir
- Printer turi: Termal printer
- Displey: Operator and Customer Displays
- Naqd pul tortmasi: Integrated, secure cash drawer
- Ulanish: (Not specified in input, assume standard power and drawer connection)
- Birinchi mavjud sana: 7 yil 2023 noyabr
6. Kafolat va qo'llab-quvvatlash
For warranty information, please refer to the warranty card included with your product or visit the official Sharp website. For technical support, service, or spare parts availability, please contact your local Sharp authorized service center or the retailer from whom you purchased the product.
Eslatma: Spare part information is not available or provided directly within this product's specifications as per initial data.
