Hercules HE818D Raqamli ko'z va mahkamlagich mashinasi 110V foydalanuvchi qo'llanmasi

1. Kirish

This manual provides essential instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your Hercules HE818D Digital Eyelet and Snap Fastener Machine. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury. Keep this manual for future reference.

2. Xavfsizlik bo'yicha ko'rsatmalar

Always adhere to the following safety guidelines to prevent accidents and ensure safe operation:

• Elektr xavfsizligi: Ensure the machine is connected to a grounded 110V power outlet. Do not operate with wet hands or in damp conditions. Disconnect power before performing any maintenance or adjustments.
• Shaxsiy xavfsizlik: Wear appropriate personal protective equipment, such as safety glasses, to protect against flying debris. Keep hands and loose clothing away from moving parts during operation.
• Ish maydoni: Operate the machine on a stable, level surface. Keep the work area clean and well-lit. Ensure adequate space around the machine for safe operation and material handling.
• Materiallarga ishlov berish: Only use materials and fasteners compatible with the machine. Do not force materials into the machine.
• Bolalar va ruxsatsiz xodimlar: Keep children and unauthorized individuals away from the machine during operation and when it is powered on.

3. Mahsulot tugadiview

The Hercules HE818D is an advanced electronic machine designed for efficiently setting eyelets and snap fasteners. It features a robust metal construction and electronic controls for consistent and precise application across various materials.

Asosiy xususiyatlar:

• Elektron nazorat: Ensures precise and consistent eyelet and snap fastener placement.
• Kuchli qurilish: Built with high-quality metal components for durability and long-term reliability.
• Samarali ishlash: Powerful motor for rapid and efficient fastening, enhancing productivity.
• Material Versatility: Compatible with a wide range of materials, including paper, cardboard, fabrics, and light leather.

Bu rasm yon tomonni ko'rsatadi view of the Hercules HE818D Digital Eyelet and Snap Fastener Machine. It features a white and gray body with a digital control panel on the front and the 'HERCULES' brand logo on the side. The machine's main working mechanism, including the die and press, is visible at the bottom.

4. Sozlash

Follow these steps to set up your Hercules HE818D machine:

1. Paketdan chiqarish: Carefully remove the machine from its packaging. Retain all packaging materials for potential future transport or storage.
2. Joylashtirish: Place the machine on a sturdy, level workbench or table capable of supporting its weight (approximately 40 kg). Ensure there is sufficient space around the machine for safe operation and material handling.
3. Quvvat ulanishi: Connect the power cord to the machine and then plug it into a standard 110V grounded electrical outlet. Ensure the power switch is in the 'OFF' position before plugging in.
4. Dastlabki tekshirish: Before first use, visually inspect the machine for any signs of damage that may have occurred during shipping. Ensure all components are securely in place.
5. Die Installation: Install the appropriate die set for the eyelets or snap fasteners you intend to use. Refer to the die set instructions for specific installation procedures.

Bir front view of the Hercules HE818D machine, highlighting its digital control panel with various buttons and a numerical display. The main pressing mechanism is visible at the base, along with a yellow warning label.

5. Foydalanish bo'yicha ko'rsatmalar

Once the machine is set up and the correct die is installed, follow these steps for operation:

1. Yoqilgan: Flip the main power switch to the 'ON' position. The digital display should illuminate.
2. Sozlamalarni sozlash: Use the control panel buttons to select the desired mode (eyelet or snap) and adjust pressure or depth settings if available and necessary for your material and fastener type.
3. Yuk mahkamlagichlari: Place the eyelet or snap fastener components into their respective holders on the die set. Ensure they are correctly oriented.
4. Lavozim materiali: Carefully position your material (fabric, paper, leather, etc.) over the lower die, aligning it where the fastener is to be applied.
5. Activate Press: Depending on the model, activate the press using the foot pedal or a designated button on the control panel. The machine will automatically apply the fastener.
6. Tekshirish: After each application, inspect the fastener to ensure it is securely and correctly set. Adjust settings as needed for optimal results.
7. O'chirish: When finished, turn off the main power switch and unplug the machine from the power outlet.

6. Xizmat ko'rsatish

Regular maintenance ensures the longevity and optimal performance of your machine:

• Tozalash: Regularly clean the machine, especially the die area, to remove dust, material scraps, and fastener residue. Use a soft, dry cloth. For stubborn residue, a slightly damp cloth can be used, ensuring the machine is unplugged and completely dry before next use.
• Moylash: Periodically apply a small amount of machine oil to moving parts as indicated in the machine's specific lubrication points (if any are visible or specified). Avoid over-lubrication.
• Die Inspection: Inspect die sets for wear or damage. Worn dies can lead to inconsistent results and should be replaced.
• Saqlash: When not in use, store the machine in a clean, dry environment, protected from dust and extreme temperatures.

Bir tomoni view of the Hercules HE818D machine, showcasing its robust metal construction and the prominent 'HERCULES' branding. This view highlights the machine's overall design and build quality.

7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Umumiy muammolar va ularning potentsial yechimlari uchun quyidagi jadvalga qarang:

8. Texnik shartlar

9. Kafolat va qo'llab-quvvatlash

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Ensure you have your model number (HE818D) and purchase details available when contacting support.

Manufacturer: Hercules