FLEX 24V cho'tkasiz simsiz 1/2 dyuymli bolg'acha burg'ulash turbo rejimi to'plami (FX1271T-2B) foydalanish bo'yicha qo'llanma

1. Kirish

This manual provides instructions for the safe operation, maintenance, and troubleshooting of your FLEX 24V Brushless Cordless 1/2-Inch Hammer Drill Turbo Mode Kit, model FX1271T-2B. Please read this manual thoroughly before using the tool to ensure proper and safe operation.

The FLEX FX1271T-2B is a powerful 24V brushless cordless hammer drill designed for demanding drilling and driving applications. It features a 1/2-inch full-metal ratcheting chuck, two-speed settings, a Turbo Mode for increased speed, and an anti-kickback safety feature. This kit includes the drill, a 2.5Ah Lithium-Ion Battery, a 5.0Ah Lithium-Ion Battery, and a 160W Fast Charger.

Figure 1: FLEX 24V Brushless Cordless 1/2-Inch Hammer Drill Kit (FX1271T-2B) including drill, two batteries, charger, and carrying case.

2. Umumiy xavfsizlik ko'rsatmalari

OGOHLANTIRISH: Ushbu elektr asbob bilan ta'minlangan barcha xavfsizlik ogohlantirishlari, ko'rsatmalar, rasmlar va texnik xususiyatlarni o'qing. Quyida sanab o'tilgan barcha ko'rsatmalarga rioya qilmaslik elektr toki urishi, yong'in va/yoki jiddiy shikastlanishga olib kelishi mumkin.

2.1 Ish joyining xavfsizligi

• Ish joyini toza va yaxshi yoritilgan holda saqlang. Tartibsiz yoki qorong'i joylar baxtsiz hodisalarni chaqiradi.
• Elektr asboblarini portlovchi muhitda, masalan, yonuvchan suyuqliklar, gazlar yoki changlar mavjud bo'lganda ishlatmang. Elektr asboblari chang yoki tutunni yoqishi mumkin bo'lgan uchqun hosil qiladi.
• Elektr asbobini ishlatayotganda bolalar va atrofdagilarni uzoqroq tuting. Chalg'itadigan narsalar sizni nazoratni yo'qotishga olib kelishi mumkin.

2.2 Elektr xavfsizligi

• Elektr asbob vilkalari rozetkaga mos kelishi kerak. Hech qachon vilkani hech qanday tarzda o'zgartirmang. Hech qanday adapter vilkasini tuproqli (tuproqli) elektr asboblari bilan ishlatmang. O'zgartirilmagan vilkalar va mos keladigan rozetkalar elektr toki urishi xavfini kamaytiradi.
• Quvurlar, radiatorlar, poligonlar va muzlatgichlar kabi tuproqli yoki tuproqli yuzalar bilan tanaga tegmang. Agar tanangiz erga ulangan yoki erga ulangan bo'lsa, elektr toki urishi xavfi ortadi.
• Elektr asboblarini yomg'ir yoki nam sharoitda qoldirmang. Elektr asbobiga suv tushishi elektr toki urishi xavfini oshiradi.

2.3 Shaxsiy xavfsizlik

• Har doim ko'zni himoya qiluvchi vositalardan foydalaning. Xavfsiz ko'zoynaklar, ko'zoynaklar yoki yuz qalqoni foydalaning.
• Asbobni uzoq vaqt ishlatganda eshitish himoyasini taqing.
• To'g'ri kiyinish. Keng kiyim yoki zargarlik buyumlarini kiymang. Soch va kiyimingizni harakatlanuvchi qismlardan uzoqroq tuting.
• Ogoh bo'ling, nima qilayotganingizni kuzatib boring va elektr asbobini ishlatganda aql-idrokdan foydalaning.

2.4 Asbobdan foydalanish va parvarishlash

• Elektr asbobini majburlamang. Ilovangiz uchun to'g'ri elektr asbobidan foydalaning.
• Har qanday sozlash, aksessuarlarni almashtirish yoki elektr asboblarni saqlashdan oldin batareya paketini elektr asbobdan ajratib oling.
• Bo'sh turgan elektr asboblarni bolalar qo'li etmaydigan joyda saqlang va elektr asbob yoki ushbu ko'rsatmalar bilan tanish bo'lmagan shaxslarga elektr asbobni ishlatishiga yo'l qo'ymang.
• Elektr asboblari va aksessuarlarini saqlang. Harakatlanuvchi qismlarning noto'g'ri joylashishi yoki bog'lanishi, qismlarning sinishi va elektr asbobning ishlashiga ta'sir qilishi mumkin bo'lgan boshqa holatlar mavjudligini tekshiring.

2.5 Batareya asboblaridan foydalanish va parvarishlash

• Faqat ishlab chiqaruvchi tomonidan belgilangan zaryadlovchi bilan quvvatlang. Bir turdagi batareya to'plamiga mos keladigan zaryadlovchi boshqa batareya to'plami bilan foydalanilganda yong'in xavfini keltirib chiqarishi mumkin.
• Elektr asboblarini faqat maxsus mo'ljallangan batareya paketlari bilan ishlating. Boshqa har qanday batareya paketlaridan foydalanish shikastlanish va yong'in xavfini keltirib chiqarishi mumkin.
• Batareya paketi ishlatilmaganda, uni boshqa metall buyumlardan, masalan, qog'oz qisqichlari, tangalar, kalitlar, mixlar, vintlardek yoki bir terminaldan boshqasiga ulanishi mumkin bo'lgan boshqa kichik metall buyumlardan uzoqroq tuting. Batareya terminallarini bir-biriga qisqartirish kuyish yoki yong'inga olib kelishi mumkin.
• Qo'pol sharoitlarda batareyadan suyuqlik chiqishi mumkin; aloqa qilishdan saqlaning. Agar tasodifan aloqa sodir bo'lsa, suv bilan yuvib tashlang. Agar suyuqlik ko'zlarga tegsa, qo'shimcha ravishda tibbiy yordamga murojaat qiling. Batareyadan chiqarilgan suyuqlik tirnash xususiyati yoki kuyishga olib kelishi mumkin.

3. Komponentlar kiritilgan

Your FLEX 24V Brushless Cordless 1/2-Inch Hammer Drill Kit (FX1271T-2B) includes the following items:

• FLEX 24V Brushless Cordless 1/2-Inch Hammer Drill
• (1) FLEX 24V 2.5Ah Lithium-Ion Battery (FX0111-1)
• (1) FLEX 24V 5.0Ah Lithium-Ion Battery (FX0121-1)
• FLEX 160W Fast Charger
• Yordamchi tutqich
• Tashish sumkasi

Figure 2: The FLEX Advantage highlights the included 2.5Ah and 5.0Ah Lithium-Ion batteries, emphasizing their power, runtime, and fast charging capabilities.

4. O'rnatish va dastlabki foydalanish

4.1 Batareyani zaryadlash

1. Connect the 160W Fast Charger to a standard power outlet.
2. Batareya to'plamini zaryadlash moslamasiga u chertib o'rnatguncha suring.
3. The charger's indicator lights will show the charging status. A fully charged battery will be indicated by a solid green light.
4. To'liq zaryadlangandan so'ng, batareyani zaryadlovchidan chiqarib oling.

4.2 Batareyani o'rnatish

1. Align the battery pack with the battery port on the base of the drill handle.
2. Slide the battery into the port until it locks securely into place. Ensure it is fully seated to prevent accidental dislodgement during operation.
3. To remove the battery, press the release button(s) on the sides of the battery pack and slide it out.

4.3 Yordamchi tutqichni ulash

For improved control and safety, especially during high-torque applications or hammer drilling, attach the auxiliary handle.

1. Yordamchi tutqichni bo'shating clamp soat miliga teskari aylantirish orqali.
2. Slide the handle over the front of the drill body, positioning it to your preferred angle.
3. Kl.ni tortingamp tutqich ishonchli mahkamlanguniga qadar soat yo'nalishi bo'yicha aylantirib.

Figure 3: The drill with the auxiliary handle attached, providing enhanced control and stability, particularly when the anti-kickback feature engages.

4.4 Installing Drill Bits or Accessories

1. Ensure the drill is off and the battery is removed for safety.
2. Grip the rear collar of the 1/2-inch full-metal ratcheting chuck and rotate the front collar counter-clockwise to open the chuck jaws.
3. Insert the drill bit or accessory fully into the chuck jaws.
4. Rotate the front collar clockwise to tighten the chuck jaws firmly around the bit. The ratcheting mechanism will provide an audible click when securely tightened.
5. Gently pull on the bit to ensure it is properly secured.

Figure 4: Detail of the 1/2-inch full-metal ratcheting chuck, designed for secure bit retention and durability.

5. Foydalanish bo'yicha ko'rsatmalar

5.1 Quvvatni yoqish/o'chirish va tezlikni boshqarish

• Trigger kaliti: Squeeze the trigger switch to turn the drill on. Release it to turn the drill off.
• O'zgaruvchan tezlik: The trigger switch is pressure-sensitive, allowing for variable speed control. Pressing the trigger further increases the speed.
• Oldinga/Orqaga yo'naltirish selektori: Located above the trigger, push the selector left for forward rotation (drilling/driving) and right for reverse rotation (removing screws). Center position locks the trigger for safety.

5.2 Gear Selection (2-Speed)

The drill features a 2-speed gearbox for optimal performance across various applications.

• Vites 1 (past tezlik, yuqori moment): Slide the gear selector switch to position '1'. Ideal for driving screws, drilling large holes, or applications requiring maximum torque.
• Vites 2 (Yuqori tezlik, past moment): Slide the gear selector switch to position '2'. Suitable for fast drilling of smaller holes in wood or metal.

NOTE: Always ensure the drill is stopped before changing gear settings to prevent damage to the gearbox.

5.3 Mode Selection (Drill, Drive, Hammer Drill)

Rotate the collar behind the chuck to select the desired operating mode:

• Burg'ulash rejimi (Burg'ulash belgisi): For drilling holes in wood, metal, and plastics.
• Drive Mode (Screw Icon): For driving screws. The clutch settings (numbered ring) allow you to adjust the torque to prevent over-driving screws or damaging materials.
• Bolg'a burg'ulash rejimi (bolg'a belgisi): For drilling into masonry, brick, and concrete. This mode combines rotary action with a hammering motion.

5.4 Turbo rejimi

The Turbo Mode button, located on top of the drill, provides an immediate increase in speed for faster results when needed.

• ni bosing TURBO button during operation to engage maximum speed.
• Release the button to return to the previously selected speed setting.

Figure 5: The Turbo Mode button, when pressed, provides increased speed for rapid task completion.

5.5 Anti-Kickback Feature

The drill is equipped with an advanced anti-kickback braking technology. If the drill bit binds during operation, the system will detect the sudden rotational force and rapidly stop the motor to reduce the risk of kickback and potential injury.

5.6 Integratsiyalashgan LED chiroq

An LED light is integrated into the drill to illuminate the work area, improving visibility in dimly lit conditions. The light activates when the trigger is pressed.

Figure 6: The integrated LED light provides illumination for improved visibility in dark work environments.

5.7 Drilling into Masonry (Hammer Drill Mode)

When drilling into masonry, brick, or concrete:

1. Select Hammer Drill Mode.
2. Ensure the auxiliary handle is securely attached and held firmly with both hands.
3. Use appropriate masonry drill bits.
4. Apply steady, firm pressure to the drill, allowing the hammering action to break up the material.

Figure 7: The FLEX hammer drill in action, demonstrating its capability to drill into tough materials with 1,400 in-lbs of torque.

6. Xizmat ko'rsatish

6.1 Tozalash

• Har qanday tozalash yoki texnik xizmat ko'rsatishdan oldin har doim batareya paketini ajratib oling.
• Shamollatish teshiklaridan chang va axlatni tozalash uchun yumshoq cho'tka yoki siqilgan havodan foydalaning.
• Asbob korpusini reklama bilan o'chiringamp mato. Qattiq kimyoviy moddalar yoki abraziv tozalash vositalaridan foydalanmang.
• To'g'ri tutilishini ta'minlash uchun shtutser jag'larini toza va qoldiqlardan tozalang.

6.2 Saqlash

• Asbobni, batareyalarni va zaryadlovchi qurilmani salqin, quruq joyda, to'g'ridan-to'g'ri quyosh nuri va namlikdan uzoqroqda saqlang.
• Ensure batteries are partially charged (not fully depleted or fully charged for long-term storage) before storing.
• Store the tool in its carrying case to protect it from damage.

7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

8. Texnik shartlar

9. Kafolat va qo'llab-quvvatlash

9.1 FLEX Limited Lifetime Warranty

This FLEX tool is protected by the FLEX Limited Lifetime Warranty. To qualify for this warranty, you must register your new FLEX tool, battery, or charger within 30 days of purchase through December 31, 2025. Registration can be completed at registermyFLEX.com.

Please refer to the official FLEX website or your product packaging for full terms and conditions of the warranty.

9.2 Mijozlarni qo‘llab-quvvatlash

For technical assistance, replacement parts, or warranty claims, please contact FLEX customer support. Contact information can typically be found on the FLEX official websaytida yoki mahsulot qadoqlarida.

When contacting support, please have your model number (FX1271T-2B) and purchase date available.