GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case Instruction Manual

1. Kirish

Thank you for choosing the GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning installation to ensure optimal performance and safety.

2. Xavfsizlik ma'lumotlari

• Always disconnect the power supply from the wall outlet before installing or servicing any components inside the case.
• Statik elektr ta'siridan shikastlanmaslik uchun barcha komponentlarni ehtiyotkorlik bilan ishlating. Antistatik bilaguzukdan foydalanishni o'ylab ko'ring.
• Avoid placing the computer case in direct sunlight, near heat sources, or in areas with high humidity.
• Haddan tashqari qizib ketishining oldini olish uchun korpus atrofida to'g'ri shamollatishni ta'minlang.
• Kichik qismlar va qadoqlash materiallarini bolalardan uzoqroq tuting.
• Do not attempt to modify the case or its components, as this may void your warranty and pose a safety risk.

3. Paket tarkibi

Paketingizda barcha narsalar mavjudligini tekshiring:

• GAMDIAS ATLAS M1 WH Mid Tower Gaming Computer Case
• 3 x 120mm ARGB PWM Fans (pre-installed)
• Aksessuarlar qutisi (vintlar, simi bog'ichlari, mahkamlagichlar va boshqalar)
• Foydalanuvchi uchun qo'llanma (ushbu hujjat)

4. Mahsulot tugadiview

The GAMDIAS ATLAS M1 WH is a mid-tower gaming case designed for optimal performance and aesthetics. It features a panoramic tempered glass design, integrated RGB lighting, and an optimized cooling architecture.

4.1-rasm: Old view of the GAMDIAS ATLAS M1 WH case with internal components and digital display.

4.1. Raqamli displey

The case features an embedded monitor that displays real-time system information, including CPU, GPU, and ambient temperatures. Users can switch between display modes via the I/O port or using the ZEUS CAST software.

Figure 4.2: Close-up of the digital display showing temperature readings.

4.2. Concise I/O Design

The front I/O panel provides convenient access to essential ports and controls:

• 1 x USB 3.2 Gen 2 Type-C Port (up to 10 Gbps)
• 1 x USB 3.0 porti
• Fan LED Control Button
• Monitor rejimini almashtirish
• Integrated Audio Jack

4.3-rasm: Batafsil view of the front I/O panel.

4.3. Interior Accommodation

The ATLAS M1 WH case offers generous space for various components:

• Motherboard Compatibility: ATX, Micro-ATX, Mini-ITX
• VGA Card Length: Up to 410mm
• Air Cooler Height: Up to 160mm

Figure 4.4: Diagram illustrating interior dimensions and component clearances.

4.4. Storage Compatibility

The case supports flexible storage configurations:

• Up to 4 x 2.5" SSDs
• Alternatively, 3 x 2.5" SSDs + 1 x 3.5" HDD
• PSU uzunligi: 180 mm gacha

4.5-rasm: Ichki view highlighting storage drive and power supply unit mounting areas.

4.5. Cooling Support

The ATLAS M1 WH is designed for efficient cooling with support for multiple fans and radiators:

• Up to 6 fans can be installed.
• Radiator Support: Top (up to 360mm/280mm), Side (up to 240mm), Rear (120mm).

Figure 4.6: Cooling configuration options for fans and radiators.

4.6. Built-in ARGB PWM Fans

The case comes with three pre-installed ARGB PWM fans: two 120mm reverse intake fans on the side and one 120mm fan on the rear exhaust. These fans provide excellent airflow and customizable ARGB visuals via the motherboard or the LED control button.

4.7-rasm: View of the pre-installed ARGB PWM fans within the case.

4.7. Functionality with Seamless Visuals

The ATLAS M1 series features perforated air vents and seamless tempered glass panels, offering both optimal airflow and stunning visual presentation of your build.

Figure 4.8: The ATLAS M1 series design, highlighting seamless tempered glass panels.

4.8. Product Features Video

5. Sozlash

Follow these steps to assemble your computer system within the GAMDIAS ATLAS M1 WH case:

5.1. Ishni tayyorlash

1. Korpusni barqaror, tekis yuzaga qo'ying.
2. Remove the tempered glass side panel by gently pulling it open (tool-less design).
3. Remove any internal packaging materials.

5.2. Ana platani o'rnatish

1. I/U ekranini (agar anakartga oldindan biriktirilmagan bo'lsa) korpusning orqa teshigiga o'rnating.
2. Align your ATX, Micro-ATX, or Mini-ITX motherboard with the standoffs inside the case. Ensure the standoffs match your motherboard's form factor.
3. Anakartni taqdim etilgan vintlar bilan mahkamlang.

5.3. Elektr ta'minoti blokini (PSU) o'rnatish

1. Locate the PSU mounting area at the rear bottom of the case.
2. Slide your PSU into the designated bay.
3. PSU ni korpusning orqa qismidan vintlar bilan mahkamlang.

5.4. Saqlash diskini o'rnatish

1. For 2.5" SSDs: Mount the drives to the designated SSD trays or mounting points.
2. For 3.5" HDDs: Install the drive into the HDD cage (if applicable) or designated 3.5" mounting points.
3. Barcha drayverlarni tegishli vintlar bilan mahkamlang.

5.5. Grafik kartani (GPU) o'rnatish

1. Kerakli PCIe uyasi qopqoqlarini korpusning orqa qismidan olib tashlang.
2. Insert your GPU into the appropriate PCIe slot on the motherboard.
3. Secure the GPU with screws or the retention clip.
4. The case supports both horizontal and vertical GPU mounting (vertical mount requires a separate riser cable, not included).

5.6. Kabellarni ulash

1. Connect all power cables from the PSU to the motherboard, GPU, and storage drives.
2. Connect the front panel I/O cables (USB, audio, power switch, reset switch, LED indicators) to their respective headers on the motherboard.
3. Connect the pre-installed fan cables to the motherboard fan headers or the built-in SATA-powered fan hub.
4. Utilize the cable management routes and tie-downs behind the motherboard tray to keep cables organized and improve airflow.

6. Operatsion

6.1. Yoqish

Once all components are installed and cables are connected, close the side panel. Connect the power cable to the PSU and a wall outlet, then press the power button on the front I/O panel.

6.2. Digital Display Control

The digital display on the front of the case shows real-time temperature data. Use the dedicated button on the I/O panel to cycle through CPU temperature, GPU temperature, and ambient temperature displays. For advanced control and customization, install the GAMDIAS ZEUS CAST software.

6.3. ARGB Yoritish Boshqaruvi

The pre-installed ARGB fans can be controlled in two ways:

• Anakartni sinxronlashtirish: Connect the ARGB cables to a compatible 5V 3-pin ARGB header on your motherboard and use your motherboard's RGB software for synchronization and effects.
• Case Control: Use the LED control button on the front I/O panel to cycle through various pre-set lighting effects and colors if not connected to a motherboard ARGB header.

7. Xizmat ko'rsatish

Regular maintenance helps ensure the longevity and optimal performance of your computer system.

• Chang filtrini tozalash: The case includes magnetic dust filters on the top and bottom. Regularly remove and clean these filters with water and mild soap, or simply brush off accumulated dust. Ensure they are completely dry before reattaching.
• Kosonni tozalash: Yumshoqdan foydalaning, damp cloth to wipe down the exterior of the case. For tempered glass panels, use a glass cleaner and a microfiber cloth to avoid streaks. Avoid abrasive cleaners or solvents.
• Internal Dust Removal: Periodically use compressed air to clear dust from internal components, especially fan blades and heatsinks. Ensure the system is powered off and unplugged before performing internal cleaning.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your GAMDIAS ATLAS M1 WH case, refer to the following common problems and solutions:

• Quvvat yo'q:
  • Ensure the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
  • Old panel quvvat tugmasi kabeli anakart sarlavhasiga to'g'ri ulanganligini tekshiring.
• Ventilyatorlar aylanmayapti / RGB ishlamayapti:
  • Check if the fan power cables are securely connected to the motherboard or the fan hub.
  • Ensure the ARGB cables are connected to a compatible 5V 3-pin ARGB header on the motherboard or the case's internal controller.
  • If using motherboard software, ensure it is installed and configured correctly.
• Raqamli displey ishlamayapti:
  • Verify that the display's power and data cables are correctly connected to the motherboard.
  • Ensure the ZEUS CAST software is installed and running.
• Haddan tashqari qizib ketish:
  • Ensure all case fans are spinning correctly and oriented for optimal airflow (intake/exhaust).
  • Clean any dust filters and internal components to improve air circulation.
  • Verify that CPU and GPU coolers are properly installed and functioning.

For further assistance, please contact GAMDIAS customer support.

9. Texnik shartlar

10. Kafolat va qo'llab-quvvatlash

For warranty information and technical support, please refer to the official GAMDIAS websayti yoki bevosita mijozlarga xizmat ko'rsatish bilan bog'laning. Kafolat da'volari uchun xarid kvitansiyasini xaridni tasdiqlovchi hujjat sifatida saqlang.

GAMDIAS Official Websayt: www.gamdias.com