1. Kirish
This manual provides essential information for the proper installation, operation, and maintenance of your RAK Wireless RAK12500 GNSS GPS Location Module and Antenna. The RAK12500 is a high-accuracy GNSS module designed for integration with compatible development boards, such as the RAK WisBlock Core and Meshtastic Starter Kit. It is important to note that this product is a component and not a standalone GPS device; it requires other separate parts to function.
2. Mahsulot tugadiview
The RAK12500 module utilizes the u-blox ZOE-M8Q chip, offering precise location and velocity data. It supports multiple satellite systems including GPS, GLONASS, QZSS, and BeiDou. Communication with a WisBlock Core is facilitated via Serial and I2C interfaces.
Figure 2.1: RAK12500 GNSS GPS Location Module with its accompanying antenna. The module is compact, designed for integration into larger systems.
2.2-rasm: Burchakli view of the RAK12500 module, highlighting its compact design and connection points.
Figure 2.3: The RAK12500 module with its dimensions indicated, measuring 10 mm x 23 mm.
3. Sozlash
The RAK12500 is designed for easy integration into RAK Wireless WisBlock systems. Follow these steps for proper setup:
- Prepare your WisBlock Core: Ensure your WisBlock Core module (e.g., RAK4631) is ready for module attachment.
- Connect the RAK12500 Module: Carefully align the RAK12500 module with the appropriate slot on your WisBlock Base board (e.g., RAK19007). Gently press down until it is securely seated.
- Attach the GPS Antenna: Connect the provided GPS antenna to the IPEX connector on the RAK12500 module. Ensure the connection is firm.
- Antennani joylashtiring: For optimal performance, position the GPS antenna with the top side facing towards the sky, ensuring an unobstructed view sun'iy yo'ldoshlar.
Figure 3.1: Diagram illustrating the connection of the RAK12500 module to a WisBlock base board and the proper orientation for the GPS antenna.
Important: This module is not a standalone GPS receiver. It requires a compatible host device, such as a RAK WisBlock Core, to function.
4. Operatsiya
Once properly connected to a compatible WisBlock Core and powered, the RAK12500 module will begin acquiring satellite signals. The module offers a 10 Hz update rate for location data.
- Cold Start Fix: A cold start, where the module has no prior satellite data, typically achieves a location fix within 29 seconds.
- Hot Start Fix: A hot start, where the module has recent satellite data, can achieve a location fix in approximately 1 second.
- Aniqlik: The module provides a location accuracy of ±2.5 meters and a velocity accuracy of ±0.05 m/s.
Data communication occurs via Serial and I2C interfaces, allowing the host device to retrieve GNSS information.
5. Xizmat ko'rsatish
The RAK12500 module is a low-maintenance electronic component. To ensure its longevity and optimal performance:
- Toza tuting: Avoid dust and debris accumulation on the module and its connectors. Use a soft, dry brush or compressed air for cleaning if necessary.
- Ehtiyotkorlik bilan ishlang: Electronic components are sensitive. Avoid dropping the module or subjecting it to excessive force.
- Atrof-muhit sharoitlari: Operate the module within its specified temperature and humidity ranges. Avoid exposure to extreme temperatures or moisture.
- Antennani parvarish qilish: Ensure the GPS antenna cable is not kinked or damaged. A damaged antenna can significantly reduce performance.
6. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
If you encounter issues with your RAK12500 module, consider the following:
- No Location Fix:
- Verify the GPS antenna is securely connected and positioned with a clear view osmondan.
- Ensure the RAK12500 module is correctly seated on the WisBlock Base board.
- Check that the host device (WisBlock Core) is powered on and running the correct firmware/software to interface with the GNSS module.
- Incorrect Location Data:
- Ensure the antenna has a clear, unobstructed view of the sky. Obstacles like buildings, dense foliage, or being indoors can degrade signal quality.
- Allow sufficient time for a cold start fix if the module has been off for an extended period or moved a significant distance.
- Module Not Detected by Host:
- Re-seat the RAK12500 module on the WisBlock Base board to ensure proper electrical contact.
- Confirm that the host device's firmware supports the RAK12500 module and that the communication interfaces (Serial/I2C) are correctly configured.
For further assistance, refer to the RAK Wireless documentation or contact their support channels.
7. Texnik shartlar
| Xususiyat | Tafsilot |
|---|---|
| GNSS chipset | u-blox ZOE-M8Q |
| Supported Satellites | GPS, GLONASS, QZSS, BeiDou |
| Joylashuv aniqligi | ±2.5 meters |
| Tezlik aniqligi | ±0.05 m/s |
| Yangilanish tezligi | 10 Gts |
| Cold Start Fix Time | 29 soniya |
| Hot Start Fix Time | 1 soniya |
| Aloqa interfeyslari | Serial, I2C (to WisBlock Core) |
| Modul oʻlchamlari (U x G x Y) | 23 mm x 10 mm x 2.54 mm (0.86" x 0.37" x 0.1") |
| Element og'irligi | 0.634 untsiya (0.02 Kilogramm) |
| Ulanish texnologiyasi | IPEX (for antenna) |
8. Qutida nima bor
The RAK12500 package includes the following components:
- 1x RAK12500 GNSS GPS Location Module
- 1x GPS antennasi
9. Kafolat haqida ma'lumot
The RAK12500 GNSS GPS Location Module comes with a 1 yillik ishlab chiqaruvchi kafolati. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, please refer to the official RAK Wireless websayt yoki mijozlarga xizmat ko'rsatish bilan bog'laning.
10. Qo'llab-quvvatlash
For technical support, additional documentation, or inquiries regarding your RAK Wireless RAK12500 module, please visit the official RAK Wireless websayt yoki ularning Amazon do'kon sahifasi:
- RAK Wireless Amazon Store
- For general inquiries, you may also refer to the product page: RAK12500 Product Page
