SingularXYZ E1 Lite GNSS RTK geodeziya uskunasi foydalanuvchi qo'llanmasi

1. Kirish

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your SingularXYZ E1 Lite GNSS RTK Surveying Equipment. Designed for high-precision satellite positioning, this system offers centimeter-level accuracy for various surveying applications. Please read this manual thoroughly before using the equipment to ensure optimal performance and safety.

2. Nimalar kiradi

Upon opening the transport case, verify that all components are present:

• E1 Lite GNSS Receiver (x2)
• Tashish qutisi (x2)
• USB-toifa C kabeli (x2)
• Super zaryadlovchi (x2)
• SingularPad dasturi (x1)
• SC200 Ma'lumotlar Yig'uvchisi (x1)
• USB kabeli (x1)
• Super zaryadlovchi (x1)
• Qavs (x1)
• Tez ishga tushirish bo'yicha qo'llanma (x1)
• Tezkor Boshlash Kartasi (x1)
• Qamchi antennasi (x2)
• Tape Measure (x1)
• 20 cm extension rod plugged on tribrach (x1)

Figure 2.1: E1 Lite GNSS RTK Surveying Equipment components.

Figure 2.2: Product packaging and contents.

Maxsus eslatma: Poles, tripods, and tribrachs are not included with this product and must be acquired separately if needed for your surveying tasks.

3. O'rnatish va dastlabki ulanish

3.1 Qurilmalarni zaryadlash

The E1 Lite RTK handheld GPS provides over 20 hours of continuous operation on a single charge. Use the provided Type-C chargers to fully charge both the E1 Lite GNSS Receivers and the SC200 Data Collector before initial use. Fast charging is supported.

3.2 Qurilma tugadiview and Interfaces

Familiarize yourself with the device's front panel indicators and various connection interfaces:

Figure 3.1: Front Panel and Interfaces of the E1 Lite GNSS Receiver.

• Old panel: Satellite Tracking Indicator, Static & Network Indicator, Power Indicator, Function Button.
• Interfeyslar: NFC (Touch connection), Bluetooth, USB Type-C (for charging and data download), WiFi, TNC Connector (for UHF Antenna), RS232 Serial Port.

3.3 Connecting Devices via SingularPad Software

The SingularPad software is essential for controlling and configuring your E1 Lite GNSS RTK equipment. Follow these steps to connect your devices:

General Connection Steps:

1. Turn on your GNSS device.
2. On the SC200 Data Collector, open the SingularPad software.
3. ga oʻtish Device >> Communication qurilmangizni ulash uchun.
4. For SingularXYZ RTK Receivers (e.g., Y1 GNSS receiver): Select SingularXYZ >> RTK >> Bluetooth. Ni qidirish your device's Serial Number (SN) and connect.
5. For GNSS NMEA Devices (other brands): Select Other >> RTK(NMEA0183) >> Bluetooth. Search and connect the device.
6. For SingularXYZ GNSS Tablets (e.g., T8 Pro GNSS tablet): Select Other >> Internal GPS >> Internal GPS and connect the device.
7. After successful connection, you can go to Device >> Device Information uchun view current device information.

Figure 3.2: Setting up Rover and Base units in SingularPad.

Setting up Rover and Base (for Base + Rover mode):

1. Ensure you have two E1 Lite GNSS receivers. Designate one as the base and the other as the rover.
2. Connect both to your PDA device via Bluetooth.
3. Place both your E1 Lite base and rover in an open view osmondan.
4. Connect the whip antenna to both E1 Lite base and rover.
5. Setting up the Base: Connect E1 Lite base to your PDA, go to Device >> Base. uchun Base Startup Mode, you can input known point coordinates or select Yagona nuqta mode for automatic setup. Set Datalink as Internal Radio, and customize radio channels, frequency, and protocol. Save settings and Start Base.
6. Setting up the Rover: Disconnect E1 Lite base and connect to the rover in the software. Go to Device >> Rover, oʻrnating Ma'lumotlar havolasi as Internal Radio. Match and set the same protocol and frequency as the base setting. Click To'plam to save settings and click Murojaat qiling.

4. Foydalanish bo'yicha ko'rsatmalar

4.1 Ishlash rejimlari

The E1 Lite GNSS RTK system supports two primary working modes:

• Base + Rover Mode: Provides millimeter-level positioning. Compatible with base stations of other brands. Not subject to network and regional restrictions.
• Rover + CORS Mode: Provides centimeter-level positioning. Requires a network signal. CORS account is not included and must be purchased from your local CORS provider.

Figure 4.1: E1 Lite Working Modes.

4.2 CORS/RTK tuzatish xizmati bilan ishlash

To utilize the CORS/RTK correction service, ensure you have purchased a CORS/RTK Correction Service account in your local area. Your PDA device (phone/tablet/data collector) must have network access and support Bluetooth connection. Place your E1 Lite GNSS receiver in an open view osmondan.

1. SingularPad dasturini oching.
2. bosing "Communication" and connect to your E1 Lite receiver's SN via Bluetooth.
3. bosing Oling to obtain Mount-Point list and select appropriate one. Click Boshlash va Murojaat qiling.
4. bosing "Rover". O'rnatish Ma'lumotlar havolasi as Phone Internet. Then go to Ulanish rejimi and fill in your CORS/RTK Correction Service account details.

Figure 4.2: Connecting to CORS/RTK Correction Service.

4.3 ViewRTK joylashuv holatini aniqlash

After completing your E1 Lite RTK setup, check the current RTK solution status in the upper left corner of the SingularPad software:

• TUZILGAN: E1 Lite is receiving corrections stably and obtaining a Fixed RTK solution with centimeter-level accuracy. Typically, E1 Lite achieves a Fixed RTK solution in a few seconds under good environments.
• FLOAT: E1 Lite receives corrections from the base/CORS, but due to obstructions or magnetic field interference, the signal reception is not very stable and the accuracy is sub-meter level. In tougher conditions, it may take a bit longer to achieve FIXED status.
• AVTONOM: RTK tuzatish ma'lumotlarini olmasdan bitta nuqtali sun'iy yo'ldosh joylashuvi. Aniqlik metr darajasida.

Figure 4.3: RTK Positioning Status Indicators.

Maslahat: Before surveying, make sure E1 Lite has a clear sky, free from obstacles like buildings, trees, cars, and more.

4.4 Kengaytirilgan funksiyalar

• 60° Tilt Surveying: The E1 Lite GNSS Surveying System with IMU initializes in 5 seconds and supports tilt measurements up to 60°, compatible with regular 5/8" thread poles. This allows for surveying in challenging locations without needing perfect vertical alignment.
• 5 Kilometers UHF Range: The radio range between the rover and the base can reach 5 kilometers (3.1 miles). The E1 Lite is compatible with base stations of other brands in both Radio and CORS mode and supports RTCM v3/CMR correction data transmission.
• Robust Signal Tracking: Supports Full-Constellation Tracking (GPS/GLONASS/Galileo/BDS/QZSS/IRNSS/SBAS etc.), allowing for fixed RTK solutions in seconds even in challenging environments like multipath, trees, and city canyons.
• Easy Data Download via Web UI: Access E1's WiFi to conduct static data download, firmware upgrade, and configuration via its web sahifa.

Figure 4.4: Advanced IMU Tilt Measurement in action.

Figure 4.5: Superior Performance in Challenging Environments.

Figure 4.6: Easy Data Download via Web UI.

5. Xizmat ko'rsatish

The E1 Lite GNSS RTK equipment is designed for durability and reliability in harsh environments. It features an IP68 reytingi, making it waterproof, dustproof, and shock-resistant.

• Qurilmani muntazam ravishda yumshoq, damp mato. Abraziv tozalash vositalaridan saqlaning.
• Ensure all ports (Type-C, TNC) are free from debris and properly sealed when not in use.
• Store the equipment in its transport case when not in use to protect it from physical damage and environmental factors.
• Periodically check cables and connectors for wear and tear. Replace if damaged.

Figure 5.1: E1 Lite's Rugged Design and Battery Life.

6. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your E1 Lite GNSS RTK Surveying Equipment, consider the following common points:

• Ulanish muammolari: Ensure Bluetooth is enabled on both the data collector and the receiver. Verify that the correct device type and manufacturer are selected in the SingularPad software. Try restarting both devices.
• Poor Accuracy/No Fixed Solution:
  • Qabul qilgichning aniqligiga ishonch hosil qiling view of the sky, free from obstructions like buildings, dense trees, or large metal objects.
  • Check the status indicator on the device and in the SingularPad software (refer to Section 4.3).
  • Verify that the base station (if in Base+Rover mode) or CORS service (if in Rover+CORS mode) is active and providing corrections.
  • Confirm that the radio frequency and protocol settings match between the base and rover units.
• Batareya muddati: Ensure devices are fully charged before use. Check the battery indicator in the SingularPad software.
• Dasturiy ta'minot bilan bog'liq muammolar: Ensure your SingularPad software is up to date. Refer to the software's help section or online tutorials for specific software-related problems.

For persistent issues or problems not covered here, please contact SingularXYZ customer support for assistance. Refer to the "Support" section for contact details.

7. Texnik shartlar

Figure 7.1: E1 Lite RTK Key Specifications.

Figure 7.2: Lightweight and Portable Design.

8. Kafolat

The SingularXYZ E1 Lite GNSS RTK Surveying Equipment comes with a bir yillik kafolat from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards. Please retain your proof of purchase for warranty claims.

9. Qo'llab-quvvatlash va manbalar

SingularXYZ is committed to providing excellent customer support. For any inquiries, technical assistance, or service requests, please utilize the following resources:

• 1-On-1 Support Service: Direct technical support is available to assist you with any operational or technical challenges.
• Foydalanuvchi qo'llanmasi (PDF): A comprehensive PDF version of the user manual is available for download. PDF foydalanuvchi qo'llanmasini yuklab oling
• Video darsliklar: Access a library of video tutorials to help you get started and master various functions of your equipment.
• Dasturiy ta'minotni yangilash: Enjoy permanent free software upgrades and update services for the SingularPad and Post-processing Software.
• FCC Radio License Note: U.S. users must apply for an FCC radio license for commercial use (e.g., surveying, construction) with the UHF function (450–470 MHz). The device is FCC certified, and supporting information can be provided if needed.

For direct contact, please visit the official SingularXYZ websaytga kiring yoki mahsulot hujjatlari bilan birga taqdim etilgan aloqa ma'lumotlariga qarang.