1. Kirish
This manual provides detailed instructions for the installation, operation, and maintenance of your EPEVER Tracer2210AN-G3 20A MPPT Solar Charge Controller. This device is designed to efficiently manage power flow from solar panels to various battery types, including lead-acid and lithium batteries.
Asosiy xususiyatlarga quyidagilar kiradi:
- Advanced MPPT technology with efficiency no less than 99.5%.
- Avtomatik 12V/24V tizim voltage tan olish.
- Maksimal PV kirish hajmitage 100V.
- Support for Gel, AGM, Flooded, Sealed, and Lithium (LiFePO4, Li(NiCoMn)O2) batteries.
- Umumiy salbiy topraklama dizayni.
- RS-485 communication bus interface with Modbus protocol for monitoring and parameter setting via mobile app or PC software.
- Zaryadlash quvvati va oqim cheklash funktsiyasi.
- Real-time energy statistics function and overheating power reduction.
Figure 1.1: EPEVER Tracer2210AN-G3 20A MPPT Solar Charge Controller with LCD display.
2. O'rnatish va o'rnatish
Proper installation is crucial for optimal performance and safety. Follow the connection order carefully.
2.1 Ulanish tartibi
Connect the system components in the following sequence:
- Batareya: Batareyani zaryadlash regulyatoriga ulang.
- PV Panel: Connect the solar PV panel to the charge controller.
- Yuklash: Connect the DC load to the charge controller.
To disconnect the system, reverse the order: Load → PV Panel → Battery.
Figure 2.1: Diagram illustrating the correct connection order for the solar charge controller, battery, PV panel, and DC load.
2.2 No-Battery Mode and Battery Mode
The Tracer-AN G3 series supports operation with or without a battery, depending on the inverter type and power requirements.
Figure 2.2: Connection diagrams for operating the solar charge controller in no-battery mode (top) and battery mode (bottom).
No-Battery Mode Warning: When operating without a battery, ensure the inverter is connected directly to the controller's battery terminals. For high-frequency inverters, PV input power must be greater than (load output power ÷ inverter conversion efficiency ÷ controller conversion efficiency). For power frequency inverters, PV input power must be greater than (load output power ÷ inverter conversion efficiency ÷ controller conversion efficiency ÷ 2).
2.3 Temperature Sensor Connection
Connect the remote temperature sensor probe to the designated port on the controller. This ensures accurate temperature compensation for charging parameters, optimizing battery life.
Video 2.1: Demonstrates the unboxing, overview of components, and basic installation steps for the Tracer-AN controller, including connecting the temperature sensor.
3. Foydalanish bo'yicha ko'rsatmalar
The controller features an LCD display and buttons for easy configuration and monitoring.
3.1 Batareya turini sozlash
To ensure proper charging, configure the battery type on the controller:
- Press and hold the "ENTER" button for 5 seconds under the battery voltage interfeysi.
- Press the "SELECT" button when the battery type interface is flashing to cycle through available types.
- Press the "ENTER" button to confirm the selected battery type.
Figure 3.1: LCD display showing battery type selection options.
Qo'llab-quvvatlanadigan batareya turlari:
- Lead-acid: Sealed (default), Gel, Flooded, User-defined.
- Lityum: LiFePO4 (4s/8s), Li(NiCoMn)O2 (3s/6s/7s), User-defined.
3.2 Setting Load Mode
The controller offers multiple load working modes. To set the load mode:
- Press and hold the "ENTER" button for 5 seconds under the load mode interface.
- Press the "SELECT" button when the load mode interface is flashing to cycle through options.
- Press the "ENTER" button to confirm the desired load mode.
Manual Control Mode: When you press the ENTER button, the load will open; press ENTER again, the load will close.
3.3 Ish rejimlarini yuklash
| 1** | Taymer 1 | 2** | Taymer 2 |
|---|---|---|---|
| 100 | Chiroq ON/OFF | 2n | O'chirilgan |
| 101 | Quyosh botganidan keyin yuklanish 1 soat davom etadi | 201 | Quyosh chiqishidan 1 soat oldin yuk yoqiladi |
| 102 | Quyosh botganidan keyin yuk 2 soat davomida yonadi | 202 | Quyosh chiqishidan 2 soat oldin yuk yoqiladi |
| 103-113 | Quyosh botganidan keyin yuk 3 ~ 13 soat davomida yonadi | 203-213 | Quyosh chiqishidan 3 ~ 13 soat oldin yuk yoqiladi |
| 114 | Quyosh botganidan keyin yuk 14 soat davomida yonadi | 204 | Quyosh chiqishidan 14 soat oldin yuk yoqiladi |
| 115 | Quyosh botganidan keyin yuk 15 soat davomida yonadi | 205 | Quyosh chiqishidan 15 soat oldin yuk yoqiladi |
| 116 | Sinov rejimi | 2n | O'chirilgan |
| 117 | Manuel rejim (Birlamchi yuklash ON) | O'chirilgan |
4. Aksessuarlar
The EPEVER Tracer2210AN-G3 controller supports various accessories for enhanced monitoring and control:
Figure 4.1: Diagram showing the EPEVER Tracer2210AN-G3 controller and compatible accessories.
- Masofaviy harorat sensori (RTS300R47K3.81A): Acquires battery temperature for compensation of control parameters. Standard cable length is 3m.
- USB dan RS485 kabeliga (CC-USB-RS485-150U): Used to monitor and set parameters via PC software (Solar Station PC software). Cable length is 1.5m.
- Masofaviy hisoblagich (MT50): Displays various operating data and system faults. Features easy-to-operate buttons and a numeric display.
- WiFi Serial Adapter (eBox-WiFi-01): For monitoring and setting parameters via mobile APP software through WiFi signals.
- RS485-dan Bluetooth adapteriga (eBox-BLE-01): For monitoring and setting parameters via mobile APP software through Bluetooth signals.
- Logger (eLOG01): Records real-time operating status of the controller.
Video 4.1: tugadiview of the EPEVER G3 Version TracerAN MPPT Solar Charge Controller, highlighting its features and accessories.
5. Texnik shartlar
5.1 Mexanik parametrlar
| Element | Tracer1210AN | Tracer2210AN | Tracer3210AN | Tracer4210AN |
|---|---|---|---|---|
| Hajmi | 172x139x44 mm | 220x154x52 mm | 228x164x55 mm | 252x180x63 mm |
| O'rnatish o'lchami | 130x130 mm | 170x145 mm | 170x164 mm | 210x171 mm |
| O'rnatish teshigi o'lchami | PH5 mm | |||
| Terminal | 12AWG (4 mm²) | 6AWG (16 mm²) | 6AWG (16 mm²) | 6AWG (16 mm²) |
| Tavsiya etilgan simi | 12AWG (4 mm²) | 10AWG (6 mm²) | 8AWG (10 mm²) | 6AWG (16 mm²) |
| Og'irligi | 0.57 kg | 0.94 kg | 1.26 kg | 1.65 kg |
| Sertifikatlash | CE IEC62109 | |||
5.2 Electrical Parameters (Tracer2210AN)
| Element | Kuzatuvchi 1210AN | Kuzatuvchi 2210AN | Kuzatuvchi 3210AN | Kuzatuvchi 4210AN |
|---|---|---|---|---|
| Tizim nominal jildtage | 12 / 24VDC avtomatik | |||
| Nominal zaryad oqimi | 10A | 20A | 30A | 40A |
| Nominal tushirish oqimi | 10A | 20A | 30A | 40A |
| Batareya hajmitage diapazoni | 8 ~ 32 V | |||
| Maks. PV ochiq elektron volttage | 100V① | 92V② | ||
| MPP jildtage diapazoni | (Batareya jildtage +2V)~72V | |||
| Maks. PV kirish quvvati | 130W/12V 260W/24V | 260W/12V 520W/24V | 390W/12V 780W/24V | 520W/12V 1040W/24V |
| O'z-o'zini iste'mol qilish | ≤12mA | |||
| Bo'shatish davri voltage tushish | ≤0.23V | |||
| Haroratni qoplash koeffitsienti③ | -3mV / ℃ / 2V (standart) | |||
| Topraklama | Umumiy salbiy | |||
| RS485 interfeysi | 5VDC / 100mA | |||
| LCD yoritgich vaqti | 60S (standart) | |||
| Ish muhitining harorati④ | -25℃～+50℃ (100% input and output) | |||
| Saqlash harorati oralig'i | -20℃～+70℃ | |||
| Nisbiy namlik | ≤95%, NC | |||
| Korpus | IP30 | |||
①When a lead-acid battery is used, the controller hasn't the low temperature protection.
②Minimal ish muhiti haroratida
③25 ℃ atrof-muhit haroratida
④When a lithium-ion battery is used, the system voltage can't be identified automatically.
6. Xizmat ko'rsatish
To ensure the longevity and optimal performance of your EPEVER Tracer2210AN-G3 MPPT Solar Charge Controller, regular maintenance is recommended. Please refer to the full product manual for detailed maintenance procedures. Key maintenance aspects typically include:
- Periodically inspect all wiring and connections for tightness and corrosion.
- Ensure the controller's heat sink is free from dust and debris to maintain proper cooling.
- Verify that the ventilation around the controller is unobstructed.
- Check the battery terminals for any signs of wear or damage.
- Monitor the system's performance regularly via the LCD display or connected monitoring software/app to detect any anomalies.
7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
If you encounter any issues with your EPEVER Tracer2210AN-G3 MPPT Solar Charge Controller, please refer to the comprehensive troubleshooting guide in the full product manual. Common issues and their solutions are typically covered, including:
- LCD display not lighting up or showing incorrect readings.
- Battery not charging or overcharging.
- Load not functioning correctly.
- Error codes or warning indicators on the display.
For complex issues or if problems persist, please contact customer support.
8. Kafolat va qo'llab-quvvatlash
EPEVER products are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact the seller.
Authorized Supplier: GolandCentury is an authorized supplier for the EPEVER brand. Our engineers are available to provide technical support and assistance with your solar system setup.
For technical inquiries or support, please reach out to GolandCentury's service centers.
