PS5 DualSense/DualSense Edge kontrollerlari uchun GuliKit TMR magnitli joystik almashtirish to'plami

Kirish

This manual provides detailed instructions for installing and maintaining the GuliKit TMR Magnetic Joystick Replacement Kit (Model NS51-PS5) for PlayStation 5 DualSense and DualSense Edge controllers. This kit is designed to address joystick drift issues by replacing the original joystick modules with advanced TMR (Tunnel Magnetoresistance) technology.

Important: This replacement process requires soldering. If you are not experienced with soldering, it is recommended to seek professional assistance to ensure proper installation and prevent damage to your controller.

Asosiy xususiyatlar

• Upgraded Anti-Drift TMR Joystick Technology: Utilizes contact-less magnetic field sensing for enhanced stability, drift-free performance, high precision, and smooth operation.
  

  Image: A PlayStation 5 controller featuring the GuliKit TMR joysticks, emphasizing their high durability and extended lifespan due to contactless, wear-free TMR sensors.

• To'g'ridan-to'g'ri almashtirish: Designed for direct installation on DualSense/DualSense Edge gamepads without requiring circuit modifications.
• Anti-Interference Structure: Unique structural design prevents interference from magnetic triggers on the joysticks.
  

  Image: A diagram illustrating the unique structural design of the GuliKit TMR joystick, engineered to prevent interference from magnetic triggers.
• Premium Stick Caps: Includes 2 GuliKit KK Ring anti-friction stick knobs for improved grip and comfort.
• Kam quvvat iste'moli: Features similar low power consumption to carbon film joysticks.
  

  Image: Various GuliKit joystick modules displayed, emphasizing their low power consumption feature, comparable to traditional carbon film joysticks.

• Higher Temperature Stability: Engineered for reliable performance across various operating temperatures.
  

  Image: A controller featuring a GuliKit TMR joystick, highlighting its enhanced stability and performance under varying temperature conditions.

Xavfsizlik ma'lumotlari

The installation of this product involves disassembling your controller and performing soldering. Please observe the following safety precautions:

• Ensure the controller is powered off and disconnected from all power sources before beginning.
• Work in a well-ventilated area to avoid inhaling solder fumes.
• Tegishli shaxsiy himoya vositalarini, shu jumladan xavfsizlik ko'zoynaklarini taqing.
• Use a soldering iron with adjustable temperature control and ensure it is properly grounded.
• Be cautious of hot components and tools to prevent burns.
• If you are unsure about any step, consult a professional or refer to additional soldering guides.

Paket tarkibi

Verify that all components are present in your GuliKit TMR Magnetic Joystick Replacement Kit:

• GuliKit TMR Magnetic Joystick Modules (2 units)
• GuliKit KK Ring Anti-Friction Stick Caps (2 units)

Image: Two GuliKit TMR magnetic joystick modules and two black GuliKit KK Ring thumbstick caps.

O'rnatish bo'yicha ko'rsatmalar

The following steps outline the process for replacing the joystick modules. This procedure requires a professional tool kit, including a soldering iron, desoldering pump/wick, flux, and small screwdrivers (not included).

1. Disassemble the Controller: Carefully open your PS5 DualSense or DualSense Edge controller. Refer to specific controller disassembly guides if unfamiliar with the process. Disconnect the battery and any ribbon cables.
2. Locate Joystick Modules: Identify the existing joystick modules on the controller's circuit board.
3. Desolder Old Modules: Using a soldering iron and desoldering tool (pump or wick), carefully desolder all pins connecting the old joystick modules to the circuit board. Ensure all solder is removed to prevent damage to the PCB pads.
4. Remove Old Modules: Once all pins are desoldered, gently remove the old joystick modules from the circuit board.
5. Prepare New Modules: Place the new GuliKit TMR Magnetic Joystick Modules into the vacant positions on the circuit board, ensuring correct orientation.
6. Solder New Modules: Solder each pin of the new joystick modules to the circuit board. Ensure strong, clean solder joints without bridges.
7. Reassemble Controller: Carefully reassemble your controller, reconnecting all cables and the battery.

Image: Illustration showing the GuliKit TMR joystick module being installed into a controller, highlighting direct replacement.

For visual guidance, GuliKit provides installation videos on their product listings and website. It is highly recommended to watch these videos before attempting installation.

Kalibrlash

After installing the new TMR joystick modules, calibration is required to ensure optimal performance and accuracy. This step is crucial for eliminating any potential residual drift or incorrect input readings.

1. Access Calibration Tool: Visit the official GuliKit website and locate their joystick calibration tool.
2. Tekshirish moslamasini ulash: Connect your PS5 controller to a PC using a USB cable.
3. Ekrandagi ko'rsatmalarga amal qiling: The calibration tool will guide you through the process, typically involving moving the joysticks through their full range of motion.
4. Kalibrlashni tekshiring: After calibration, test the joysticks in a game or a controller testing utility to confirm proper functionality and absence of drift.

For Xbox Series controllers, calibration can be performed via the Xbox console settings or the "Xbox Accessories" software on PC.

Xizmat

The GuliKit TMR Magnetic Joysticks are designed for long-lasting, drift-free performance due to their contact-less nature. Minimal maintenance is required.

• Tozalash: Periodically clean the exterior of your controller and the base of the thumbsticks to prevent dust and debris accumulation.
• Thumbstick Caps: The included GuliKit KK Ring anti-friction stick caps can be easily replaced if they show signs of wear.

Image: Diagram illustrating the easy replacement mechanism of the GuliKit KK Ring joystick cap.

Muammolarni bartaraf qilish; nosozliklarni TUZATISH

O'rnatishdan keyin muammolarga duch kelsangiz, quyidagi muammolarni bartaraf etish bosqichlarini ko'rib chiqing:

• Joystick Not Responding/Incorrect Input:
  • Ensure all solder joints are clean and secure. Re-solder any questionable connections.
  • Verify that the joystick module is correctly seated on the PCB.
  • Perform the calibration process again.
  • Check for any damaged traces on the PCB during desoldering/soldering.
• Persistent Drift:
  • Re-calibrate the joysticks using the GuliKit calibration tool.
  • Ensure no physical obstructions are preventing the joystick from returning to its center position.
• Kontroller yoqilmaydi:
  • Double-check all ribbon cable connections and the battery connection.
  • Ensure no short circuits occurred during soldering.

If issues persist, contact GuliKit customer support for further assistance.

Texnik xususiyatlari

Kafolat va qo'llab-quvvatlash

For warranty information, technical support, or further inquiries, please visit the official GuliKit websayti yoki bevosita mijozlarga xizmat ko'rsatish bilan bog'laning. Kafolat da'volari uchun xaridingizni tasdiqlovchi hujjatingizni saqlang.

GuliKit Official Websayt: www.gulikit.com