Ortur Laser Rotary Roller YRR 2.0 Instruction Manual

1. Kirish

The Ortur Laser Rotary Roller YRR 2.0 is an accessory designed to expand the capabilities of your laser engraving machine, enabling precise engraving on cylindrical and irregularly shaped objects. This manual provides detailed instructions for assembly, operation, and maintenance to ensure optimal performance and safety.

Image: The Ortur YRR 2.0 Rotary Roller showcasing its ability to engrave on diverse cylindrical objects like cans, cups, and bottles.

2. Mahsulot xususiyatlari

• Cylindrical Object Engraving: Designed for engraving on various cylindrical items such as round wood, cups, bottles, pipes, bowls, guitars, drums, tubes, and even over-length plates.
• Adjustable Diameters: Features 7 adjustable diameter steps, allowing engraving on objects with diameters as small as 8mm and up to 110mm. This versatility accommodates a wide range of cylindrical items.
• Oson operatsiya: Compatible with popular engraving software like LaserGRBL and LightBurn (supports Windows XP, 7, 8, 10, Mac OS, and Linux).
• Keng muvofiqlik: Can be used with various brands of engraving machines. Note: May require swapping blue and green wires on the cable for compatibility with non-Ortur machines.
• Kuchli qurilish: Features an all-metal structure for safety and stability, along with a one-piece thickened rubber roller for stronger friction and stable engraving.

3. Paket tarkibi

Please verify that all components are present before proceeding with assembly:

• Ortur Laser Rotary Roller YRR 2.0 Unit
• Dvigatelni uzaytirish kabeli
• YRR Motor Wire
• Screws and Assembly Tools (e.g., screwdriver, wrench)
• Haydash kamari
• Foydalanuvchi uchun qo'llanma (ushbu hujjat)

4. O'rnatish va yig'ish

Follow these steps to assemble your Ortur Laser Rotary Roller YRR 2.0. For a visual guide, please refer to the assembly video below.

Video: Ortur Rotary Roller YRR2.0 Installation Tutorial. This video demonstrates the complete assembly process of the YRR 2.0 rotary roller.

1. Motor and Base Plate Assembly: Attach the stepper motor to the main base plate using the four small screws. Tighten securely with a screwdriver.
2. Roller Support Brackets: Secure the two roller support brackets to the main base plate using the provided screws and nuts. Ensure they are aligned correctly.
3. Main Roller Installation: Insert the main roller (the longer, lighter-colored roller) into the designated slots on the support brackets. Secure it with the provided nuts and bolts, ensuring the bearings are in place.
4. Adjustable Roller Installation: Install the second roller (adjustable roller) in a similar manner to the main roller. This roller will be used for adjusting the engraving diameter.
5. Adjusting Roller Position: Use the adjustment mechanism to set the desired distance between the two rollers. This allows for different object diameters.
6. Tasmani o'rnatish: Carefully place the drive belt around the pulleys of both rollers and the stepper motor. Ensure the belt is taut but not overly tight.
7. Yakuniy tuzatishlar: Double-check all screws and connections for tightness. Ensure the rollers spin freely.
8. Connecting to Laser Engraver: Connect the YRR motor wire to the YRR 2.0 unit. Then, connect the motor extension cord to the YRR motor wire. Refer to the image below for connection points on various Ortur models.

Image: Connection diagram illustrating how to connect the YRR 2.0 to Ortur Laser Master 2 S2, 2 Pro S2, 3, and 3 LE models.

5. Foydalanish bo'yicha ko'rsatmalar

This section guides you through using the Ortur Laser Rotary Roller YRR 2.0 with your laser engraving machine. For a visual demonstration, watch the operating video below.

Video: Connect Ortur Laser Master 3 and YRR2.0 by using LaserGRBL. This video demonstrates the software setup and engraving process for cylindrical objects.

1. Jismoniy aloqa:
   • Place the YRR 2.0 inside your laser engraving machine, ensuring the correct orientation.
   • Connect the motor extension cord to the YRR 2.0's motor line.
   • Insert the YRR motor wire into the corresponding YRR port on your laser engraving machine (e.g., Ortur Laser Master 3).
   • Plug in the USB cable and power cable to the laser engraver.
   • Long press the power-on button to power on the machine.
2. Software Configuration (LaserGRBL):
   • Turn the YRR transfer switch on your laser engraver to the left (YRR mode). Note: This switch cannot be toggled before starting the system.
   • Open the LaserGRBL software on your computer.
   • Select the correct COM port for your laser engraving machine and click "Connect".
   • Click "Grbl Configuration" under the "Grbl" menu.
   • In the Grbl Configuration window, change the value of "$22" (Homing cycle) to 0.
   • Change the value of "$101" (Y-axis travel resolution) to 80.
   • Click "Write" to save the revisions, then click "Refresh" to verify the changes.
3. Object Placement and Focusing:
   • Place the cylindrical object (e.g., a stainless steel thermos cup) on the YRR 2.0.
   • When focusing, align the focus stick of the laser module to the exact center of the cup.
   • After adjusting the focal length, move the focus of the laser module to the middle of the cup.
4. Engraving Process:
   • Import the image you wish to engrave into LaserGRBL.
   • Adjust the image parameters as shown in the figure (Brightness: 100, Contrast: 0, White Clip: 0, Quality: 10 Lines/mm). Rotate the image if necessary.
   • Set the image size (e.g., W: 40mm, H: 57.9mm).
   • Set the Engraving Speed to 3000 mm/min.
   • Select "Laser Mode: M4 - Dynamic Power".
   • Set S-MIN to 0 and S-MAX to 1000.
   • Click "Create!".
   • Determine the carving scope by previewing the laser path.
   • Click the "Start" button to begin engraving.
5. Post-Engraving (Returning to Normal Use):
   • If the YRR 2.0 is not used, turn the YRR switch back to the right (Y-Motor mode) for normal use of the machine.
   • Re-open "Grbl Configuration".
   • Change the value of "$22" (Homing cycle) back to 1.
   • Change the value of "$101" (Y-axis travel resolution) back to 100.
   • Click "Write" and then "Refresh" to save and verify the changes.

Image: The Ortur YRR 2.0 Rotary Roller positioned within a laser engraving machine, ready for operation.

6. Adjusting Engraving Diameter

The YRR 2.0 offers 7 adjustable diameter settings to accommodate various cylindrical objects, ranging from 8mm to 110mm.

Image: The YRR 2.0 with a goblet placed on its rollers, demonstrating its capability for engraving on delicate and irregularly shaped cylindrical items. The inset shows a close-up of the adjustable roller mechanism.

To adjust the diameter, loosen the securing screws on the adjustable roller mechanism. Slide the roller to the desired position based on the object's diameter. Tighten the screws to secure the roller in place.

7. Moslik

The Ortur Laser Rotary Roller YRR 2.0 is designed for broad compatibility with Ortur laser engraving machines and can also be adapted for use with other brands.

• Ortur Machines: Fully compatible with Ortur Laser Master series (e.g., OLM2 S2, OLM2 Pro S2, OLM3, OLM3 LE).
• Boshqa brendlar: For compatibility with non-Ortur machines, it may be necessary to swap the blue and green wires at one end of the motor cable. Refer to your specific machine's documentation for wiring details if issues arise.

8. Xizmat ko'rsatish

Regular maintenance ensures the longevity and optimal performance of your YRR 2.0.

• Tozalash: Periodically clean the rollers and the main unit to remove dust, debris, and engraving residue. Use a soft, dry cloth. Avoid abrasive cleaners.
• Kamar tarangligi: Check the drive belt regularly for proper tension. It should be snug but not overly tight. Adjust if necessary.
• Moylash: Apply a small amount of light machine oil to the roller bearings and moving parts as needed to ensure smooth operation.
• Saqlash: When not in use, store the YRR 2.0 in a clean, dry environment away from direct sunlight and extreme temperatures.

9. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your YRR 2.0, refer to the following common troubleshooting tips:

• Rollers Not Rotating:
  • Barcha simi ulanishlarini tekshiring, ular ishonchli.
  • Verify the YRR transfer switch on your laser engraver is in the correct position (YRR mode).
  • Ensure the drive belt is properly installed and not slipping.
  • Check software settings (Grbl Configuration) for correct Y-axis travel resolution and homing cycle values.
• Engraving Distortion/Slippage:
  • Ensure the cylindrical object is securely placed on the rollers and not moving during engraving.
  • Verify the drive belt tension.
  • Check that the object's surface is clean and free of oils or residues that could reduce friction.
  • Adjust the roller spacing to match the object's diameter precisely.
• Dasturiy ta'minot ulanishidagi muammolar:
  • Confirm the correct COM port is selected in LaserGRBL/LightBurn.
  • Restart both the laser engraver and the software.
  • USB kabel ulanishini tekshiring.
• Incompatible Machine:
  • If using a non-Ortur machine, ensure the blue and green wires on the motor cable are correctly swapped if required for your specific engraver model.

10. Texnik shartlar

Image: Detailed diagram illustrating the dimensions of the Ortur YRR 2.0 Rotary Roller.

11. Kafolat va qo'llab-quvvatlash

For warranty information and technical support, please refer to the official Ortur websayt yoki chakana sotuvchingizga murojaat qiling. Kafolat da'volari uchun xaridingizni tasdiqlovchi hujjatingizni saqlang.