RADIOMASTER Pocket Hall Gimbal Transmitter User Manual

1. Kirish

This manual provides essential information for the safe and efficient operation of your RADIOMASTER Pocket Hall Gimbal Transmitter. Please read this manual thoroughly before use to ensure proper setup and functionality.

2. Xavfsizlik ma'lumotlari

Ishlatishdan oldin har doim foydalanish qo'llanmasiga murojaat qiling.

• Ensure batteries are correctly installed and charged before operation.
• Operate the transmitter in a safe environment, away from obstacles and people.
• Qurilmani suv yoki haddan tashqari harorat ta'sirida qoldirmang.
• Bolalar qo'li etmaydigan joyda saqlang.
• Har qanday shikastlanish yoki bo'shashgan ulanishlarni muntazam ravishda tekshiring.

3. Qutida nima bor

Qutini ochgandan so'ng, barcha komponentlar mavjudligini tekshiring:

• 1 x RADIOMASTER Pocket Radio
• 1 x Maxsus tashish sumkasi
• 1 x USB-C kabeli
• 1 x ekran himoyachisi
• 1 x stiker
• (Optional: 4 x Low Tension Springs - if included in your package)

Image: All items included in the RADIOMASTER Pocket package, including the radio, carry pouch, USB-C cable, screen protector, and sticker sheet.

4. Mahsulot tugadiview

The RADIOMASTER Pocket is a compact and lightweight remote control transmitter designed for various RC applications. It features Hall Gimbals for precise control and runs on EdgeTX firmware.

4.1 Old qismi View

Rasm: old view of the RADIOMASTER Pocket transmitter in charcoal, showing the gimbals, LCD screen, and control buttons.

Image: The RADIOMASTER Pocket transmitter showcasing its built-in LED lights, which visualize inputs and enhance visibility.

4.2 Orqa View

Rasm: orqa view of the RADIOMASTER Pocket transmitter, highlighting the battery compartments and external module bay.

4.3 Asosiy xususiyatlar

• Hall Effect Gimbals: Provide smooth centering and precise response.
• Removable Stick Ends: Qulay saqlash va tashish uchun.
• Foldable Antenna: Keeps the antenna protected and out of the way when not in use.
• Yoritilgan LCD displey: Offers a clear display of settings and telemetry.
• O'rnatilgan LED yoritgichlar: Visualize inputs and add a stylish element.
• External Module Bay: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer.
• 18650 Battery Compatibility: Uses two 18650 batteries for extended operation (batteries not included).

Image: Visual representation of the removable stick ends, foldable antenna, and Hall Gimbal features.

Rasm: batafsil view of trim buttons, 18650 battery compartments, built-in LED lights, and the external Nano module bay.

4.4 Control Layout Diagram

Image: An annotated diagram illustrating the various buttons, switches, ports, and gimbal adjustment points on the transmitter.

• Left Gimbal: Controls throttle and yaw (Mode 2).
• Right Gimbal: Controls pitch and roll (Mode 2).
• Switches (SA, SB, SC, SD, SE, SF): Programmable 2-position and 3-position switches.
• Buttons (RTN, PAGE>, PAGE<, TELE, SYS, MDL): Navigation and system control buttons.
• Kesish tugmalari: For fine-tuning channel adjustments.
• USB-C porti: For charging and data connection.
• DSC Trainer Port: For trainer functionality.
• 3.5 mm eshitish vositasi uyasi: Ovoz chiqishi uchun.
• External Module Bay: For adding compatible external modules.

5. Sozlash

5.1 Batareyani o'rnatish

1. Open the battery compartments on the rear of the transmitter.
2. Insert two 18650 Li-ion batteries, ensuring correct polarity.
3. Batareya bo'linmalarini mahkam yoping.

5.2 Dastlabki yoqish

1. Ensure the antenna is in the upright position.
2. Press and hold the power button until the screen illuminates.
3. The transmitter will boot into the EdgeTX firmware.

5.3 Gimbal Adjustment

The gimbals can be adjusted for tension and self-centering. Refer to the diagram in Section 4.4 for adjustment screw locations.

• A (I-R): Turn clockwise to disable self-centering (throttle), counter-clockwise to enable self-centering.
• B (Throttle Tension): Turn clockwise to increase stick tension, counter-clockwise to decrease tension.
• C (Up-Down Tension): Turn clockwise to increase vertical stick tension, counter-clockwise to decrease tension.
• D (Left-Right Tension): Turn clockwise to increase horizontal stick tension, counter-clockwise to decrease tension.

6. Foydalanish bo'yicha ko'rsatmalar

6.1 EdgeTX Firmware

The RADIOMASTER Pocket comes pre-installed with EdgeTX firmware, offering extensive customization and functionality. For detailed instructions on navigating EdgeTX menus, model setup, and binding procedures, please refer to the official EdgeTX documentation available online.

6.2 Using the External Module Bay

The external module bay allows for compatibility with various Nano-size modules, such as TBS Nano Crossfire or Nano Tracer. To install a module:

1. Ensure the transmitter is powered off.
2. Carefully insert the Nano module into the external module bay on the rear of the transmitter.
3. Power on the transmitter and configure the module settings within EdgeTX.

6.3 Zaryadlash

Connect the included USB-C cable to the USB-C port on the transmitter and to a suitable USB power source (e.g., computer, wall adapter). The charging indicator will show the charging status.

7. Xizmat ko'rsatish

• Keep the transmitter clean and free from dust and debris.
• Foydalanilmayotganda salqin, quruq joyda saqlang.
• Avoid dropping or subjecting the transmitter to harsh impacts.
• Periodically check all switches and gimbals for smooth operation.
• Ensure the foldable antenna mechanism operates freely.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

• Transmitter does not power on:
  • Check if 18650 batteries are correctly installed and fully charged.
  • Ensure the power button is pressed and held sufficiently.
• No signal to receiver:
  • Verify the binding procedure between the transmitter and receiver.
  • Check the external module (if used) for proper installation and configuration.
  • Ensure the antenna is fully extended.
• Gimbals or switches not responding:
  • Check settings within EdgeTX firmware.
  • Inspect for any physical obstructions or damage.
• Firmware issues (e.g., "No Drivers or Firmware" message):
  • Connect the transmitter to a computer via USB-C.
  • Visit the official RADIOMASTER or EdgeTX website for firmware update instructions and necessary drivers.
  • Follow the provided guides carefully to re-flash or update the firmware.

9. Texnik shartlar

Image: Technical drawing showing the dimensions of the RADIOMASTER Pocket transmitter.

10. Rasmiy mahsulot videosi

Vizualni yakunlash uchun ushbu rasmiy videoni tomosha qilingview of the RADIOMASTER Pocket Hall Gimbal Transmitter's features and design.

11. Kafolat va qo'llab-quvvatlash

For warranty information, technical support, or further assistance, please visit the official RADIOMASTER websayti yoki bevosita mijozlarga xizmat ko'rsatish bilan bog'laning. Kafolat da'volari uchun xaridingizni tasdiqlovchi hujjatingizni saqlang.

Official RADIOMASTER Store: RADIOMASTER Store on Amazon