RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. Kirish

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. Sozlash

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 Paketni ochish va dastlabki tekshirish

• Paketdagi barcha komponentlarni ehtiyotkorlik bilan olib tashlang.
• Qadoqlash ro'yxatida ko'rsatilgan barcha narsalar mavjudligini tekshiring.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 Tekshirgichni ulash

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• Ethernet orqali quvvat (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• Tashqi quvvat adapteri: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• Kamera ulanishlari:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Serial Control: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

Rasm 2.2: Masalanample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 Tarmoq konfiguratsiyasi

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Access the controller's web a ga IP manzilini kiritish orqali interfeys web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• ichida web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. Operatsiya

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 dan ortiqview Boshqaruv elementlari

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

Rasm 3.2: Batafsil view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 Kamerani tanlash

• Quick Select Buttons: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• Raqamli klaviatura: For cameras beyond the quick select buttons (up to 255), press the CAM identifikatori button, then enter the camera number using the numeric keypad, and press KIRISH.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 PTZ boshqaruvi

• Joystik: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• PT tezlik tugmasi: Adjusts the gimbal movement speed for pan and tilt.
• Zoom Knob: Provides precise zoom control, especially useful in preview rejimi.

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: ni bosing AVTO FOCUS button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• BACKLIGHT Button: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 oldindan sozlangan

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press KIRISH saqlamoq. bosing ESC chiqish uchun.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press KIRISH to recall. Press ESC chiqish uchun.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 Menyu navigatsiyasi

• MENU tugmasi: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), KIRISH confirms selections, and ESC acts as a back button.

4. Xizmat ko'rsatish

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 Tozalash

• Use a soft, dry cloth to clean the exterior of the controller.
• O'jar axloqsizlik uchun, bir oz dampen the cloth with water or a mild, non-abrasive cleaning solution.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 Saqlash

• Uzoq vaqt davomida foydalanilmaganda, nazorat moslamasini to'g'ridan-to'g'ri quyosh nuri va haddan tashqari haroratdan uzoqroq, salqin va quruq joyda saqlang.
• Qurilmani chang va namlikdan saqlang.

5. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

Ushbu bo'limda siz duch kelishi mumkin bo'lgan umumiy muammolarning echimlari keltirilgan.

5.1 Quvvat yo'q

• Quvvat manbasini tekshiring: Ensure the power adapter is securely connected to both the controller and a working power outlet.
• PoE tekshiruvi: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• Kabelning yaxlitligi: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• Tarmoqqa ulanish: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• Protokol nomuvofiqligi: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• Kamera identifikatori: Ensure the correct camera ID is selected on the controller.
• Kirish ma'lumotlari: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web interfeys.
• Seriyali ulanish: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• Mikrodastur: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webyangilanishlar uchun sayt.

5.3 LCD Display Issues

• Displey yo'q: Tekshirish moslamasi yoqilganligiga ishonch hosil qiling.
• Xira displey: Check if there are any brightness settings on the controller that can be adjusted.

6. Texnik shartlar

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. Mahsulot video namoyishi

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. Kafolat va qo'llab-quvvatlash

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official websayt.

• Ishlab chiqaruvchi: Xiamen RGBlink Science & Technology Co.,Ltd.
• Rasmiy Websayt: www.rgblink.com (Eslatma: Bu to'ldiruvchi URL, please refer to your product packaging or official documentation for the correct support websayt.)
• Bog'lanish uchun ma'lumot: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.