Elitech Digital Moisture Meter MOT-270W User Manual

1. Kirish

Thank you for choosing the Elitech MOT-270W Digital Moisture Meter. This device is designed for accurate measurement of moisture content in various materials, primarily wood, as well as concrete, mortar, and brick. Its pin-type design allows for precise readings, while features like a backlit LCD, audible/visual alerts, data hold, and max/min value tracking enhance usability. Please read this manual thoroughly before operation to ensure correct usage and optimal performance.

2. Xavfsizlik ma'lumotlari

• O'lchov ignalari o'tkir. Jarohatlanishning oldini olish uchun ehtiyotkorlik bilan ushlang.
• Jonli elektr zanjirlarini o'lchashga urinmang. Ushbu qurilma elektr sinovlari uchun mo'ljallanmagan.
• Keep the device away from water and high humidity environments to prevent damage, except during intended moisture measurement.
• Qurilmani uzoq vaqt davomida haddan tashqari harorat yoki to'g'ridan-to'g'ri quyosh nuri ta'siriga qo'ymang.
• Remove batteries if the device will not be used for a long time to prevent leakage.
• Batareyalarni mahalliy qoidalarga muvofiq utilizatsiya qiling.

3. Mahsulot tugadiview

The Elitech MOT-270W is a compact and robust pin-type moisture meter. It features a clear LCD display, intuitive button controls, and a protective cap for the measurement pins.

Figure 1: Elitech MOT-270W Digital Moisture Meter in operation.

Asosiy xususiyatlar:

• Pin-Type Measurement: Two sharp pins for direct contact and accurate moisture detection.
• Multi-Material Modes: Dedicated settings for various wood types, concrete, mortar, and brick.
• Orqa yoritilgan LCD displey: Provides clear readings in various lighting conditions.
• Ovozli va vizual ogohlantirishlar: Indicates high, medium, or low moisture content.
• Ma'lumotni ushlab turish funktsiyasi: Oson yozib olish uchun displeydagi joriy o'qishni muzlatib qo'yadi.
• MAX/MIN Value Tracking: Records the highest and lowest moisture readings during a measurement session.
• Avtomatik o'chirish: 10 daqiqa harakatsizlikdan keyin oʻchib, batareya quvvatini tejaydi.
• Avtomatik kalibrlash: Ensures measurement accuracy.

Figure 2: Key features of the Elitech MOT-270W, including automatic calibration and shutdown.

4. Sozlash

4.1 Batareyani o'rnatish

The Elitech MOT-270W requires one (1) AAA battery (not included) for operation. Follow these steps to install the battery:

1. Qurilmaning orqa tarafidagi batareya bo'limi qopqog'ini toping.
2. Bo'limni ochish uchun qopqoqni suring yoki echib oling.
3. Bo'lim ichida ko'rsatilganidek, to'g'ri qutblanishni (+/-) ta'minlab, bitta AAA batareyasini joylashtiring.
4. Batareya bo'linmasi qopqog'ini mahkam yopilganligiga ishonch hosil qilib, uni qayta joyiga qo'ying.

4.2 Dastlabki yoqish

Batareyani o'rnatgandan so'ng, tugmasini bosing Quvvat button to turn on the device. The LCD display will illuminate, and the meter will perform a brief self-test before entering measurement mode.

5. Foydalanish bo'yicha ko'rsatmalar

5.1 O'lchovni o'tkazish

1. O'lchov pinlaridan himoya qopqog'ini olib tashlang.
2. Select the appropriate material mode (see Section 5.2).
3. Firmly press the two measurement pins into the material you wish to test. Ensure both pins penetrate the surface to obtain an accurate reading.
4. Namlik miqdori foiztagLCD displeyda e ko'rsatiladi.
5. For materials where readings might fluctuate quickly, consider using the Data Hold or MAX/MIN functions (see Section 5.3).
6. After measurement, carefully withdraw the pins and replace the protective cap.

5.2 Material Modes (Measurement Gears)

The MOT-270W features multiple measurement modes, sometimes referred to as "gears," to provide accurate readings for different materials. Press the M Mavjud rejimlar orasida o'tish uchun tugmani bosing.

Figure 3: Material modes (gears) for various wood types and construction materials.

The modes are categorized as follows:

Select the mode that best matches the material you are testing for the most accurate results. If your specific wood type is not listed, choose the grade that corresponds to a similar density or common usage (e.g., Grade 3 is often suitable for many common woods).

5.3 Data Functions

5.3.1 Ma'lumotni ushlab turish funksiyasi

The Data Hold function allows you to freeze the current measurement on the display, which is useful when taking readings in hard-to-reach areas or when the value is fluctuating.

1. While taking a measurement, press the TUTING button. The current reading will be held on the display.
2. ni bosing TUTING button again to release the hold and resume live measurement.

Figure 4: Using the Data Hold function to retain a measurement.

5.3.2 MAX/MIN Value Tracking

This function allows you to track the maximum and minimum moisture content detected during a measurement session.

1. ni bosing SET button to activate MAX/MIN mode. The display will show "MAX" or "MIN".
2. As you take measurements, the display will update to show the highest (MAX) or lowest (MIN) value recorded.
3. ni bosing SET button again to switch between MAX and MIN display.
4. To exit MAX/MIN mode, press and hold the SET tugmasi.

Figure 5: Analyzing maximum and minimum moisture values.

6. Xizmat ko'rsatish

• Tozalash: Qurilmani yumshoq, quruq mato bilan artib oling. Abraziv tozalash vositalarini yoki erituvchilarni ishlatmang.
• Probni parvarish qilish: Keep the measurement pins clean and free of debris. Always replace the protective cap when not in use to prevent damage to the pins and accidental injury.
• Saqlash: Store the meter in a dry, cool place, away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods.
• Batareyani almashtirish: Replace the AAA battery when the low battery indicator appears on the display to ensure accurate readings.

7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

8. Texnik shartlar