1. Kirish
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your DAEWOO DCS2512 Thermal Pruner. The DCS2512 is a gasoline-powered chainsaw designed for pruning branches, cutting small trees, and preparing firewood. It features a 25.4 cm³ (2-stroke) engine, a 30 cm (12-inch) guide bar, and incorporates user-friendly features such as an anti-vibration system, automatic chain lubrication, and easy starting.
Please read this manual thoroughly before operating the pruner to ensure proper use and to prevent injury or damage to the equipment.
1.1-rasm: The DAEWOO DCS2512 Thermal Pruner, showcasing its compact design and 30cm guide bar.
2. Xavfsizlik bo'yicha ko'rsatmalar
Operating a thermal pruner can be dangerous if proper safety precautions are not followed. Always prioritize safety to prevent serious injury.
2.1 Shaxsiy himoya vositalari (PPE)
- Bosh himoyasi: Xavfsiz dubulg'a kiying.
- Ko'zni himoya qilish: Always wear safety glasses or goggles. The product includes safety glasses.
- Quloq himoyasi: Use ear defenders to protect against noise.
- Qo'lni himoya qilish: Wear heavy-duty work gloves. The product includes gloves.
- Oyoq himoyasi: Zanjirli arra himoya qiluvchi shim yoki shlyapa kiying.
- Oyoq himoyasi: Po‘lat burunli va sirpanmaydigan taglikli xavfsizlik etiklarini kiying.
2.2 Umumiy xavfsizlik ko'rsatmalari
- Qo'llanmani o'qing: Ishlatishdan oldin barcha ko'rsatmalar va ogohlantirishlarni tushunib oling.
- Area Safety: Ensure the work area is clear of bystanders, children, and pets. Maintain a safe distance.
- Ob-havo sharoitlari: Do not operate in adverse weather conditions such as strong winds, rain, or snow.
- Yoqilg'i bilan ishlash: Mix and refuel outdoors in a well-ventilated area. Do not smoke while handling fuel. Wipe up any spills immediately.
- Tekshirish: Before each use, inspect the pruner for loose parts, damage, or wear. Ensure the chain brake is functional.
- Qattiq ushlash: Always hold the pruner firmly with both hands.
- Qaytarilishning oldini olish: Orqaga tepish xavfidan xabardor bo'ling. Yo'naltiruvchi novdaning uchi bilan kesishdan saqlaning.
- Barqarorlik: Ensure stable footing and balance before and during cutting operations.
- Transport: Always engage the chain brake and use the blade protection cover when transporting the pruner.
3. Komponentlar va xususiyatlar
The DAEWOO DCS2512 Thermal Pruner comes with several components designed for efficient and safe operation.
3.1 Kiritilgan komponentlar
- Blade Protection Cover
- Xavfsizlik qo'lqoplari
- Xavfsizlik ko'zoynaklari
- Yoqilg'i aralashtirish shishasi
- Tool Kit (for assembly and maintenance)
- Qo'llanma paneli
- Zanjirni ko'rdim
3.1-rasm: The DAEWOO DCS2512 Thermal Pruner shown with its complete set of included accessories, including the fuel mixing bottle, tool kit, safety gloves, and safety glasses.
3.2-rasm: Boshqa view of the DAEWOO DCS2512 Thermal Pruner and its accessories, highlighting the various components provided for user convenience and safety.
3.2 Asosiy xususiyatlar
- 25.4 cm³ 2-Stroke Engine: Provides robust power for various cutting tasks.
- 30 cm (12-inch) Guide Bar: Suitable for pruning and cutting small to medium-sized wood.
- Vibratsiyaga qarshi tizim: Reduces user fatigue during extended operation.
- Avtomatik zanjir moylash: Ensures optimal chain and guide bar lubrication, extending their lifespan and improving cutting performance.
- Easy Start System: Facilitates quick and effortless engine ignition.
- Zanjirli tormoz: A safety mechanism designed to stop the chain rapidly in case of kickback.
- Himoya qoplamasi: For safe storage and transport of the guide bar.
3.3-rasm: Batafsil view of the DAEWOO DCS2512 engine housing, showing the starter handle, choke lever, and other operational controls, along with the 0.9 kW power rating.
3.4-rasm: The guide bar of the DAEWOO DCS2512 with its protective cover installed, illustrating safe storage and transport configuration.
4. O'rnatish va yig'ish
Before operating your DAEWOO DCS2512, proper assembly and fueling are essential.
4.1 Guide Bar and Chain Installation
- Dvigatel o'chirilganligiga va zanjir tormozi uzilganligiga ishonch hosil qiling.
- Yong'oqlarni bo'shatish orqali zanjir qopqog'ini olib tashlang.
- Place the chain around the clutch drum and guide bar, ensuring the cutting edges face forward on the top side of the guide bar.
- Fit the guide bar onto the studs, aligning the chain tensioner pin with the hole in the guide bar.
- Zanjir qopqog'ini almashtiring va yong'oqlarni qo'l bilan mahkamlang.
- Adjust chain tension using the tensioning screw. The chain should be snug but still able to be pulled freely by hand.
- Zanjir qopqog'ining yong'oqlarini to'liq torting.
4.2 Fuel and Oil Preparation
The DCS2512 uses a 2-stroke engine, requiring a specific fuel mixture.
- Yoqilg'i aralashmasi: Mix unleaded gasoline with high-quality 2-stroke engine oil at the ratio specified in your product documentation (typically 25:1 or 50:1, refer to the mixing bottle for guidance). Use the provided mixing bottle for accuracy.
- Zanjir yog'i: Fill the chain oil reservoir with suitable chain lubricant. The automatic lubrication system requires a constant supply of chain oil.
Ogohlantirish: Never operate the pruner without chain oil, as this will cause rapid wear to the chain and guide bar.
5. Foydalanish bo'yicha ko'rsatmalar
Follow these steps for safe and effective operation of your DAEWOO DCS2512.
5.1 Dvigatelni ishga tushirish
- Place the pruner on a flat, stable surface.
- Engage the chain brake by pushing the front hand guard forward.
- Set the choke lever to the "Closed" position (full choke).
- Yoqilg'i ko'rinmaguncha, primer lampochkasini bir necha marta bosing.
- Pull the starter cord firmly and steadily until the engine fires briefly.
- Move the choke lever to the "Open" position (half choke or run position, depending on model).
- Pull the starter cord again until the engine starts and runs.
- Allow the engine to warm up for a few moments, then disengage the chain brake before cutting.
5.2 Kesish texnikasi
- Har doim ikkala qo'lingiz bilan qattiq ushlang.
- Ensure stable footing.
- Orqaga tepilishning oldini olish uchun yo'lboshchining uchi bilan kesishdan saqlaning.
- When pruning, assess the branch's weight and direction of fall. Make relief cuts to prevent pinching the guide bar.
- Yelka balandligidan haddan tashqari ko'tarmang yoki kesmang.
5.3 Dvigatelni to'xtatish
To stop the engine, simply move the ignition switch to the "OFF" position.
6. Xizmat ko'rsatish
Regular maintenance ensures the longevity and safe operation of your pruner.
6.1 Kundalik texnik xizmat ko'rsatish
- Toza havo filtri: Remove and clean the air filter. Replace if damaged.
- Zanjir kuchlanishini tekshiring: Zarur bo'lganda sozlang.
- Inspect Chain: Check for sharpness and damage. Sharpen or replace if needed.
- Check Guide Bar: Yo'naltiruvchi novcha va moy teshiklarini tozalang. Bir tekis aşınmasını ta'minlash uchun yo'naltiruvchi novchani vaqti-vaqti bilan aylantiring.
- Check Chain Brake: Ensure it engages and disengages properly.
- Clean Unit: Remove sawdust and debris from the engine housing and cooling fins.
6.2 Davriy texnik xizmat ko'rsatish
- Buji: Shamni tekshiring va tozalang. Agar eskirgan yoki ifloslangan bo'lsa, almashtiring.
- Yoqilg'i filtri: Inspect and replace the fuel filter as needed.
- Karbyuratorni sozlash: If the engine runs poorly, consult a qualified service technician for carburetor adjustments.
7. Muammolarni bartaraf qilish; nosozliklarni TUZATISH
This section addresses common issues you might encounter with your DAEWOO DCS2512.
| Muammo | Mumkin sabab | Yechim |
|---|---|---|
| Dvigatel ishga tushmaydi | No fuel, incorrect choke setting, fouled spark plug, chain brake engaged. | Check fuel level and mixture. Adjust choke. Clean/replace spark plug. Disengage chain brake. |
| Engine starts but stalls | Incorrect fuel mixture, clogged fuel filter, dirty air filter, carburetor needs adjustment. | Verify fuel mixture. Clean/replace fuel filter. Clean air filter. Consult service technician for carburetor. |
| Zanjir samarali kesilmaydi | Dull chain, incorrect chain tension, insufficient chain oil. | Sharpen or replace chain. Adjust chain tension. Fill chain oil reservoir. |
| Haddan tashqari tebranish | Loose components, damaged chain or guide bar. | Inspect and tighten all fasteners. Replace damaged chain or guide bar. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact DAEWOO customer support or a qualified service center.
8. Texnik shartlar
Technical specifications for the DAEWOO DCS2512 Thermal Pruner.
| Xususiyat | Tafsilot |
|---|---|
| Model | DCS2512 |
| Brend | DAEWOO |
| Dvigatel turi | 2-stroke, Gasoline |
| Dvigatel hajmi | 25.4 sm³ |
| Chiqish quvvati | 0.9 kVt (1.3 HP) |
| Qo'llanma uzunligi | 30 sm (12 dyuym) |
| Taxminan Og'irligi | 4.2 kg |
| Rang | Apelsin |
| ASIN | B0FM7PRHH7 |
9. Kafolat va qo'llab-quvvatlash
For detailed warranty information, please refer to the warranty card included with your product or visit the official DAEWOO websayt. Har qanday kafolat da'volari uchun xaridingizni tasdiqlovchi hujjatni saqlang.
For technical support, spare parts, or service inquiries, please contact DAEWOO customer service through their official channels. Contact information can typically be found on the product packaging or the DAEWOO brand websayt.
