Baseus BS1 NC yarim quloq ichidagi shovqinni bekor qiluvchi quloqchinlar foydalanuvchi qo'llanmasi

1. Mahsulot tugadiview

The Baseus BS1 NC Semi-in-Ear Noise Cancelling Earbuds offer a blend of comfort and advanced audio technology. Featuring Adaptive Hybrid Active Noise Cancellation (ANC), Hi-Res Audio with LDAC support, and a lightweight design, these earbuds are engineered for extended listening and clear communication. They are also equipped with a 6-microphone AI system for clear calls and IP55 water and dust resistance.

Image: Baseus BS1 NC Semi-in-Ear Noise Cancelling Earbuds and their charging case in black.

2. Paket tarkibi

Paketda barcha narsalar mavjudligiga ishonch hosil qiling:

• Baseus Bass BS1 NC Semi-in-Ear Earbuds (Left and Right)
• Zaryadlovchi qutisi
• USB-C zaryadlovchi kabeli
• Tez boshlash uchun qo'llanma

Image: The complete retail package for the Baseus BS1 NC Earbuds, showing the earbuds, charging case, USB-C cable, and quick start guide.

3. Quloqlik va qutini zaryadlash

For optimal performance, fully charge the earbuds and charging case before first use.

3.1 Quloqliklarni zaryadlash

1. Place the earbuds into the charging case. Ensure they are correctly seated in their respective slots (L for left, R for right).
2. Close the charging case. The earbuds will begin charging automatically.

3.2 Gʻilofni zaryadlash

1. Berilgan USB-C zaryadlash kabelini korpusdagi zaryadlash portiga ulang.
2. Kabelning ikkinchi uchini USB quvvat adapteriga (qo'shilmagan) yoki kompyuterning USB portiga ulang.
3. The LED indicator on the case will show the charging status:
   • Yashil: 75% - 100% zaryadlangan
   • Sariq: 25% - 75% zaryadlangan
   • Qizil: Below 25% charged
4. A full charge for the case provides up to 40 hours of total playtime for the earbuds (with ANC off). A 10-minute charge can provide up to 2 hours of playback.

Image: The Baseus BS1 NC Earbuds resting in their open charging case, highlighting the 40-hour total playtime and rapid charging capabilities.

4. Ulanish va ulanish

4.1 Dastlabki juftlashtirish

1. Zaryadlash qutisini oching. Quloqliklar avtomatik ravishda ulanish rejimiga o'tadi.
2. Qurilmangizda (smartfon, planshet, kompyuter) Bluetooth-ni yoqing.
3. Ni qidirish "Baseus Bass BS1 NC" in the list of available Bluetooth devices.
4. Select "Baseus Bass BS1 NC" to connect. A voice prompt will confirm successful pairing.

4.2 Avtomatik qayta ulanish

Once paired, the earbuds will automatically reconnect to the last connected device when removed from the charging case and within Bluetooth range.

4.3 Ko'p nuqtali ulanish

The Baseus BS1 NC supports Baseus Smart-Connect (BSC) technology, allowing simultaneous connection to two devices. This enables seamless switching between audio sources without manual re-pairing.

To use multipoint connection:

1. Quloqliklarni birinchi qurilmangiz bilan ulang.
2. Quloqchinlarni birinchi qurilmaning Bluetooth sozlamalaridan uzing (juftlikni uzmang).
3. Quloqliklarni ikkinchi qurilmangiz bilan ulang.
4. Reconnect the earbuds to the first device from its Bluetooth settings. The earbuds should now be connected to both devices.

Audio will automatically switch to the device playing content or receiving a call.

Image: A visual representation of the Baseus BS1 NC Earbuds connected to both a laptop and a smartphone, showcasing the instant multipoint connection feature.

5. Eshitish vositalarini taqish

The Baseus BS1 NC earbuds feature a semi-in-ear design for comfortable, pressure-free wear. For optimal sound quality and noise cancellation, ensure a proper fit.

1. Chap (L) va o'ng (R) quloqchinlarni aniqlang.
2. Har bir quloqchinni quloq kanaliga muloyimlik bilan kiriting.
3. Adjust the earbud until it feels secure and comfortable. The stem should point slightly forward or downward.

Image: A person wearing the Baseus BS1 NC Earbuds, illustrating their ergonomic and lightweight design for all-day comfort.

6. Foydalanish bo'yicha ko'rsatmalar

6.1 Sensorli boshqaruv elementlari

The earbuds feature intuitive touch controls on their stems. The following are default functions, which may be customizable via the Baseus app:

Image: An illustration detailing the intuitive touch controls on the Baseus BS1 NC Earbuds for various functions like play/pause, call management, noise reduction, and voice assistant activation.

6.2 Shovqinni boshqarish rejimlari

The Baseus BS1 NC earbuds offer three noise control modes:

• Adaptive Hybrid ANC (Active Noise Cancellation): Reduces ambient noise for an immersive listening experience. Ideal for noisy environments.
• Shaffoflik rejimi: Allows you to hear your surroundings while still enjoying your audio. Useful for awareness in urban settings or conversations.
• Oddiy rejim: Standard audio playback without active noise cancellation or transparency features.

Switch between modes by pressing and holding the touch area on either earbud for 2 seconds.

Image: A cutaway diagram of a Baseus BS1 NC earbud in an ear, illustrating the semi-in-ear fit and the availability of Adaptive Noise Cancelling and Transparency Mode.

6.3 Hi-Res Audio with LDAC

These earbuds support LDAC technology, enabling high-resolution audio transmission for a detailed and rich sound experience. Ensure your device supports LDAC and activate it in your device's Bluetooth settings for the best audio quality.

Image: The Baseus BS1 NC Earbuds surrounded by sound waves, emphasizing features like Hi-Res Audio, SuperBass 2.0, and 13mm dynamic drivers for powerful sound.

6.4 6-Mic AI Clear Calls

The earbuds are equipped with 6 microphones and AI noise isolation technology to ensure your voice is clear during calls, even in noisy environments. Wind noise reduction further enhances call clarity outdoors.

Image: A detailed diagram of the Baseus BS1 NC earbud, highlighting the placement of the FF-Mic, FB-Mic, and Talk-Mic, which contribute to the 6-Mic AI Clear Call technology and wind-noise blocking design.

6.5 Smart ilovalarni boshqarish

Download the dedicated Baseus app for enhanced control and customization options. The app allows you to:

• Adjust Bass Boost levels.
• Select from various EQ Modes.
• Control Spatial Acoustics settings.
• Use the "Find Your Earbuds" feature.

Note: In guest mode, no account creation or permissions are required to customize features, but GPS access is needed to locate lost earbuds.

Image: A smartphone displaying the Baseus app interface, which offers various sound control options including Bass Boost, EQ Modes, Spatial Acoustics, and a "Find Your Earbuds" function.

7. Xizmat va parvarish

7.1 Tozalash

• Naushniklar va zaryadlash qutisini muntazam ravishda yumshoq, quruq, tuklarsiz mato bilan tozalang.
• Qattiq kimyoviy moddalar, tozalovchi erituvchilar yoki kuchli yuvish vositalaridan foydalanmang.
• Gently remove any earwax or debris from the earbud mesh and charging contacts using a small, soft brush or cotton swab.

7.2 Suv va changga chidamlilik (IP55)

The earbuds are rated IP55, meaning they are protected against limited dust ingress and low-pressure water jets from any direction. This makes them suitable for workouts and light rain exposure.

• Quloqchalarni suvga botirmang.
• Quloqchinlarni zaryadlash kontaktlariga zarar yetkazmaslik uchun ularni zaryadlash qutisiga qayta joylashtirishdan oldin quruqligiga ishonch hosil qiling.
• Zaryadlash qutisi suvga chidamli emas.

Image: The Baseus BS1 NC Earbuds shown with water droplets, signifying their IP55 rating for dust and water resistance.

7.3 Saqlash

Quloqliklarni himoya qilish va zaryadlangan holda saqlash uchun foydalanilmayotganda ularni zaryadlash qutisida saqlang.

8. Muammolarni bartaraf qilish; nosozliklarni TUZATISH

If you encounter issues with your Baseus BS1 NC earbuds, refer to the following common solutions:

• Ovoz/ulanish muammosi yo'q:
  • Quloqliklar zaryadlanganligiga ishonch hosil qiling.
  • Verify Bluetooth is enabled on your device and "Baseus Bass BS1 NC" is selected.
  • Try placing earbuds back in the case, closing it, and then reopening to reset the connection.
  • Qurilmani Bluetooth sozlamalarida unuting va qayta ulang.
• Bitta quloqchin ishlamayapti:
  • Ikkala quloqchin ham zaryadlanganligiga ishonch hosil qiling.
  • Place both earbuds back in the case, close, and reopen.
  • Quloqlikdagi va korpus ichidagi zaryadlash kontaktlarini tozalang.
• Yomon ovoz sifati:
  • Quloqliklar quloqlaringizga to'g'ri o'rnatilganligiga ishonch hosil qiling.
  • Clean the earbud mesh to remove any obstructions.
  • Check your device's audio settings and ensure LDAC is enabled if supported.
• ANC samarasiz:
  • Ensure ANC mode is activated via touch control or the Baseus app.
  • Adjust the earbuds for a better seal in your ears.

9. Texnik shartlar

10. Rasmiy mahsulot videosi

Watch the official product video for a visual guide on the Baseus BS1 NC Earbuds:

11. Kafolat va qo'llab-quvvatlash

For warranty information, technical support, FAQs, and further assistance, please visit the official Baseus support center.

Refer to the Quick Start Guide included in your package for a direct link or visit the Baseus websayt.

Note: Protection plans may be available for purchase separately.