CHT SP1133 simsiz boshqaruvchi

Mahsulot tavsifi

This product is mainly designed for PC and supports NS(Nintendo Switch) mode, BT, and 2.4G dongle for wireless PC gaming controllers. In NS mode, the controller connects to the Switch console via BT. It can also connect wirelessly via BT to Android/iOS devices and laptops. Additionally, it supports wireless connection to desktop PCs via dongle. Compatible with PC systems including XP, WIN7, WIN8, WIN10, and WIN11, the controller supports PC modes: X_INPUT/D_INPUT/NS mode.

Mahsulot xususiyatlari

1. This product mainly features PC functions, including rapid fire, motor vibration adjustment, M1/2 mapping function, and macro functionality.
2. To'rtta LED holat ko'rsatkichlarini taqdim etadi: Qizil / Oq / Yashil / Ko'k.
3. Uch rejimli kalitli 18 ta funktsional tugma: NS/BT/Dongle , dastlabki juftlashtirish uchun qulay.
4. O'rnatilgan qo'sh motorlar, yuqori aniqlikdagi Hall 3D joystik; Hall datchik platasi kalitni o'zgartirish funksiyasiga ega, uzoq rejim analog chiqishni taklif qiladi va qisqa rejim to'g'ridan-to'g'ri 255 chiqaradi.
5. Orqa tarafdagi ikkita sozlanishi mumkin bo'lgan M1/M2 tugmalari bilan jihozlangan bo'lib, ular xaritalash va makro funksiyalar uchun o'rnatilishi mumkin.
6. X_input/D_input/ NS rejimini almashtirish uchun +/- tugmasini 3 soniya ushlab turing.
7. Tez va aniq nishonni qulflash uchun 6 o'qli girosni o'z ichiga oladi.
8. Controller dasturiy ta'minotni yangilash uchun kompyuterga simli ulanishni qo'llab-quvvatlaydi va simli va simsiz ulanganda X/D-INPUT/NS rejimini qo'llab-quvvatlaydi.
9. Tekshirgich har ikki tomonda RGB yorug'lik effektlariga ega, har bir tomonda to'rtta 1615 RGB chiroq mavjud.
10. The controller is activated through charging, other methods cannot activate it.
11. Tekshirish moslamasi SWITCH konsoli/Android/IOS qurilmasi/Kompyuter bilan bog'langandan so'ng, u taxminan 5 daqiqa harakatsizlikdan so'ng avtomatik ravishda uyqu rejimiga o'tadi.
12. Zaryadlash usuli: C tipidagi port orqali yoki zaryadlovchi dok yordamida zaryadlash mumkin.
13. Kabel orqali kompyuterga yoki dongle bilan simsiz ulanganda kontroller 1000 Gts ovoz berish tezligini qo'llab-quvvatlashi kerak.

Xususiyat tavsifi

1. Two connection methods are available for controllers on a switch console:
   1. Wired connection utilizing a USB data cable.
   2. Wireless BT pairing.

NS (Switch) rejimiga ulanish

1. Controller connection to the Nintendo Switch console: when the controller button on the controller for 3 seconds until the white LED indicator flashes rapidly.Open the pairing menu on the Switch console pairing. Once paired successfully, all controller functions will work normally, and the console-assigned Indicator light will remain steady. If pairing fails, the controller will automatically enter sleep mode after approximately 60 seconds. If pairing is successful but left idle, the controller will automatically sleep after about 5 minutes.
2. BT ulanishi uchun simli yo'riqnoma: kontroller USB ma'lumot kabeli orqali Nintendo Switch konsoliga ulangandan so'ng, uni uyg'otish uchun kontrollerdagi istalgan tugmani bosing. Ma'lumot kabeli uzilgandan so'ng, kontroller Nintendo Switch konsoliga BT orqali avtomatik ravishda ulanadi. To'rttagacha kontrollerlar NS konsoliga bir vaqtning o'zida ulanishi mumkin, tayinlangan ko'rsatkich chiroqlari: Qizil/Oq/Yashil/Moviy LEDlar doimiy yonib turadi.

BT rejimi

1. Supports connection to Android devices/IOS devices/laptops. When the controller is in sleep mode.
   1. BT Connection for Android Devices: turn on the BT settings of your device(e.g., phone, TV). Switch the controller mode to “BT” mode. Press and hold the HOME button on the controller for 3s until the status indicator LED flashes blue rapidly, indicating it has entered pairing mode for Android devices. Ni qidirish qurilmangizdagi “XBOX Wireless Controller” nomli BT qurilmasini tanlang, so‘ngra ulash va ulanish uchun bosing. Muvaffaqiyatli ulangandan so'ng, ko'k LED yonib turadi.
   2. Bluetooth Connection for iOS Devices: with the controller in sleep mode and the mode switch in the “BT” position, press and hold the HOME button for 3 s. The blue LED will flash rapidly, indicating it has entered pairing mode. Ni qidirish the Bluetooth device named “XBOX Wireless Controller” on your iOS device, then click to pair and connect. Once paired successfully, the blue LED will stay lit. The next time you wake the controller by pressing any button (with the mode switch in the “BT” position), it will automatically reconnect to the previously paired Android or iOS device. If pairing is unsuccessful, the controller will enter sleep mode after about 60s. If there is no activity after successful pairing, the controller will enter sleep mode after about 5 min.
   3. Bluetooth Connection for Laptops: With the controller in sleep mode and the mode switch in the “BT” position, press and hold the HOME button for 3 s. The blue LED will flash rapidly, indicating it has entered pairing mode. Ni qidirish noutbukda "XBOX Wireless Controller" nomli Bluetooth qurilmasini tanlang, so'ngra ulash va ulanish uchun bosing. Muvaffaqiyatli ulangandan so'ng, ko'k LED yonib turadi.

Dongle rejimi:

Tekshirish moslamasida 2.4G Dongle bilan ikkita ulanish usuli mavjud:

1. Set the controller mode switch to the dongle position. While the controller is in sleep mode, press and hold the HOME button for 3 seconds until the red LED on the controller flashes rapidly.Plug the dongle into the PC’s USB port, then press the “Pairing” button on the dongle for 3 seconds until the green LED on the dongle flashes rapidly. At this point, the dongle and the controller will pair. Once successfully connected, the green LED on the dongle will stay lit, and the red LED on the controller’s indicator light will also stay lit. If pairing fails, the controller will automatically enter sleep mode after about 60 seconds. If pairing succeeds but there is no activity, the controller will automatically enter sleep mode after about 5 minutes.
2. After the controller is connected to the dongle, it supports X-INPUT functionality by default. The system assigns a solid red indicator LED, and the device name appears as “Xbox Wireless Controller” (PC must have the Xbox 360 driver installed). Press and hold the +/- buttons for 3 seconds to switch to NS mode. The system assigns a solid blue indicator LED, and the device name will be displayed as”XBOX Wireless Controller”.To switch to D-INPUT mode, press and hold the +/- buttons for 3s. The device will be displayed as”XBOX Wireless Controller,” and the controller’s indicator light will stay lit with both red and blue lights.

“HOME” tugmasi bilan ishlash

Tekshirish moslamasi tezda uyqu rejimiga o'tadi. Tekshirish moslamasi yoqilganda, kontrollerni uyqu rejimiga o'tkazish uchun "HOME" tugmasini 5 soniya bosib turing.

Nazoratchi tavsifi

1. The controller supports wired connection to a PC, with the device name displayed as “Xbox Wireless Controller”(requires Xbox 360 drivers installed on the PC).
2. Tekshirish moslamasi Nintendo Switch konsoli orqali mikrodasturlarni yangilashni qo'llab-quvvatlamaydi. Siz bizning dasturiy ta'minotimizni yuklab olishingiz va uni shaxsiy kompyuterga ulashingiz kerak bo'ladi (Agar Nintendo Switch tizimi versiyasi yangilanishi tufayli ba'zi kontroller funktsiyalari to'g'ri ishlamasa, dasturiy ta'minotni olish va mikrodasturlarni yangilash bo'yicha ko'rsatmalarni olish uchun kompaniyamiz bilan bog'laning).
3. The controller supports wake-up using any key: (excluding L3, R3, M1, M2, and the trigger modeswitch). After waking up, the controller enters the reconnection state. The white and green lights will flash in a flowing pattern. If the controller was previously paired with an NS/BT/receiver (based onthe mode switch position) and the pairing has not been cleared, or if it was paired in another mode,the mode switch will automatically enable the reconnection function.
4. Tekshirish moslamasi tugmalari orasida YUQORI, PASTGA, CHAP, O‘NG, A, B, X, Y, L, R, ZL, ZR, L3, R3, View button, HOME, Menu button, and “M”-18 functional buttons in total, along with two mapping buttons (M1, M2).It is also equipped with left and right 3D joysticks.
5. Tekshirish moslamasi tebranish funktsiyasiga ega. Nintendo Switch konsolida siz "Sozlamalar" menyusida vosita tebranishini qo'lda yoqishingiz yoki o'chirishingiz mumkin. Tekshirish moslamasi tebranish intensivligini sozlashni ham qo'llab-quvvatlaydi. Kompyuterga ulanganda, kontrollerdagi “M” tugmasini bosib turing va dvigatelning tebranish intensivligini oshirish yoki kamaytirish uchun chap 3D joystikni yuqoriga yoki pastga siljiting. To'rt daraja mavjud: 100%-60%-30%-0%. (“M” tugmachasini bosib dvigatel tebranishini sozlashda 5 soniyadan oshmasligi kerak. Sozlamalar quvvat o‘chirilgandan keyin saqlanadi va zavod sozlamalari tebranish intensivligini standart 60% ga qulflaydi.)
6. Tekshirish moslamasining M1 va M2 orqa tugmalari sozlanishi mumkin. Quyidagi funktsiya tugmalari xaritada ko'rsatilishi mumkin: YUQARI, PASTGA, CHAP, O'NG, A, B, X, Y, L1, R1, ZL, ZR, “-“, “+” va chap va o'ng 3D joystiklarining istalgan yo'nalishi.

Xaritalash jarayoni:

1. After connecting to NS/BT/Dongle, hold M+M1. The left RGB light will slowly flash white, indicating entry into mapping mode.
2. M1 moslashtirish rejimida bir marta tugmani bosing (masalan, "A"). Keyin yana M1 tugmasini bosing; RGB chirog'i bir marta o'chib-yonadi, bu "A" endi M1 bilan ko'rsatilganligini tasdiqlaydi. M2 uchun bir xil amallarni bajaring.
3. You can assign multiple function keys to M1 (M2) by holding M + M1 and inputting keys sequentially. When pressed in-game, the macro will execute based on the time intervals between the input keys. Each M1/M2 macro can store up to 16 key inputs. Clearing M1 & M2 Customization: while connected to a Nintendo Switch console or PC, mapping steps to clear the customized feature of M1. The M2 function clearing process is the same as M1. After clearing, the button will have no assigned function.(Custom settings are saved after shutdown; however, a factory reset will remove all custom functions assigned to M1 and M2.)  The Controller Supports A Turbo (rapid-fire) Function (1) hold down the “M” button and press one of the function buttons (A/B/X/Y, L1/R1, ZL/ZR) to enable the rapid-fire function. It will have a turbo function with light indicators. The TURBO button functionality applies to eight keys: A/B/X/Y, L1/R1, ZL/ZR. After setting the rapid-fire function, you can switch between manual rapid-fire, automatic rapid-fire, or single-shot. To cancel the rapid-fire function for a specific key, repeat the steps above or hold down the “M” button for 5 seconds. (2) The controller supports adjustable turbo speed: hold the M button + move the right joystick up/down to adjust the turbo speed between three levels: Fast, Medium, and Slow.(Turbo speed settings and key values are saved after shutdown. However, if a factory reset is performed, any custom functions assigned to the TURBO button and turbo speed settings will be cleared, restoring the default medium speed and single-shot mode.)

Qisqa yoki uzoq safarda ishlash uchun Trigger Stop

Trigger uzoq safar rejimida bo'lsa, chap yoki o'ng tetikni bosish 1 dan 255 gacha bo'lgan diapazonga ega bo'lgan analog funksiyani ta'minlaydi, bu tebranish haqida fikr-mulohazalar bilan birga keladi. Trigger qisqa vaqt rejimiga o'tganda, chap yoki o'ng tetikni bosish darhol 255 ga etadi, shuningdek, tebranish bilan bog'liq fikr-mulohazalar hamroh bo'ladi.

RGB yorug'lik effekti sozlamalari

RGB yoritishni ishlatish bo'yicha ko'rsatmalar:

Note: RGB lighting effects can only be adjusted when the controller is connected to the NS console orPC via wired/wireless connection. RGB effects cannot be adjusted while the controller is charging onthe dock.

1. 1-rejim: Kamalak rejimi (standart).
2. Mode 2: Lightning mode. In this mode, simultaneously press the left and right 3D buttons once(pause for 100 microseconds) to switch the light color combination.The color changes once with the key combination (L3, R3).
3. 3-rejim: Ko'p rangli velosipedda nafas olish rejimi.
4. Mode 4: In this mode, simultaneously press the left and right 3D buttons once(pause for 100 microseconds) to switch the light color combination. The color changes once with thekey combination (L3, R3).

You can adjust the brightness of the RGB lighting with the following key combinations. There are four levels: 25%, 50%, 75%, and 100% . Decrease RGB brightness: M + left joystick right direction.IncreaseRGB brightness: M + left joystick left direction.Press and hold M + “R3” for 5 seconds to turn off the RGB lighting. Press and hold M + “R3” for 5 seconds again to turn it back on. The current state is saved after powering off. Press the M button + “R3” button briefly (pause for 100 microseconds)once to switch to one RGB lighting effect, cycling through Mode 1, Mode 2, Mode 3, Mode 4, andthen back to Mode 1 (in a loop).(The lighting settings are saved after powering off. Restoring factorysettings will clear the lighting settings, with the default set to Rainbow mode.)

Menyu va M tugmasi

1. The View tugmasi / Menyu tugmasi / “M” tugmasi vazifasini bajaradi View function and Menu function when connected to a PC or Android/IOS device. The “M” button has a rapid-fire function and a motor vibration adjustment function. When used with the Nintendo SWITCH console, the View button functions as the “-” button, the Menu button functions as the “+” button, and the “M” button serves as the screenshot function.
2. Skrinshot funksiyasini Nintendo Switch konsolidagi “M” tugmasi bilan faollashtirish uchun funksiyani yoqish uchun “M” tugmasini ikki marta bosish kerak.

Zaryadlash/Qayta tiklash operatsiyasi

1. Charging via adapter: plug the controller into the Type-C port to charge it. The channel light willglow a constant red LED and will switch off once the charging is complete.
2. Quvvat manbaini zaryadlash: uni zaryad qilish uchun to'g'ridan-to'g'ri kontrollerning Type-C portini ulang. Kanal chirog'i doimiy qizil LED yonadi va boshqaruvchi to'liq zaryadlangandan so'ng chiroq o'chadi.
3. When charging the controller while it is connected to a device, the channel light will display aslowly flashing red LED, and the light will turn off once the controller is fully charged.

Batareya kamligi haqida ogohlantirish

Tekshirish moslamasining batareya quvvati qachontage drops below 3.5V, the channel’s red LED will flash rapidly toindicate low battery, signaling that the controller needs to be charged.

Kuting

When the controller is powered on, press and hold the “HOME button” for 5s to put the controller into sleep mode. When the controller is in pairing mode, it will automatically enter sleep mode if itfails to pair within 60s. When the controller is connected to the console but remains inactive for approximately 5 min, it will automatically enter sleep mode.

Funktsiyani tiklash

Tekshirish moslamasi noto'g'ri ishlayotgan bo'lsa, uni qayta o'rnatish teshigi orqali qayta o'rnatish tugmasini bosib uni qayta o'rnatishingiz mumkin.

Masofani qabul qilish

Tekshirish moslamasini samarali qabul qilish masofasi 10 metrni tashkil qiladi.

Malumot oqimi

Sleep mode current: Less than 20μA. Pairing current: Less than 45mA.
Ushbu mahsulot Nintendo SWITCH dok orqali quvvat olishni qo'llab-quvvatlaydi va simsiz uyg'otish funksiyasiga ega.

Tekshirgichning elektr xususiyatlari

• Quvvat manbai: o'rnatilgan polimer batareyasi
• Foydalanish vaqti: Taxminan 6 dan 8 soatgacha doimiy foydalanish
• Batareya quvvati: 800 mA / soat
• Zaryadlash vaqti: Taxminan 3 soat
• Zaryadlash hajmitage: shahar 5V
• Zaryadlash oqimi: 390mA
• Ishlash oqimi: 290mA (Dvigatel tebranishi va RGB maksimal darajaga o'rnatilganda maksimal oqim)

3D Joystick/Gyroskopni zavod kalibrlashi

In the controller’s sleep mode, press L3 + R1 to enter joystick and trigger calibration. At this time, the red and green lights will flash alternately. Rotate the joystick forcefully for 2 full circles and press the trigger all the way down 2 times. Then, place the controller on a flat surface and press the A button again to complete the joystick and trigger calibration. The controller will automatically proceed to motion calibration, indicated by a flashing blue light. Once motion calibration is complete,the controller will automatically return to sleep mode.

Tekshirgichni zavod qulflash rejimini sozlash

In the controller’s sleep mode, simultaneously press and hold the left 3D joystick (L3 button), the right 3D joystick (R3 button), and the “M button” for 3 seconds. The indicator lights will all illuminate briefly and then turn off, indicating that the controller has entered factory lock mode. (In factorylock mode, the controller disables the wake-up function for any button, preventing frequent connection issues caused by accidental touches during packaging and transportation.) (After setting the factory lock mode: Defaults to X_input mode.)

Zavod qulflash rejimidan chiqish

When the controller is in factory lock mode, all buttons are disabled for wake-up. To exit “factorymode,” you must charge the controller using a USB data cable at least once. Once charged, thecontroller’s functionality will be restored.

Controller mikrodasturini yangilash

1. If certain functions of the controller become unavailable due to a console system upgrade or if a functional update is required, the controller firmware can be upgraded via a PC. Double-click to openthe software: **”GDF-G560637_74A7_V1.0_250110.exe”** as shown in the figure below:
2. When the controller is in sleep mode or powered on, connect it to the PC using a USB cable . Simultaneously press and hold HOME + X + Y for 3 seconds to enter upgrade mode (the “Online” indicator will turn green). The “Update Firmware” button will change from gray to black. Click “UpdateFirmware” to proceed with the upgrade, as shown in the figure below. This indicates a successful connection.
3. Yangilash jarayonida ma'lumot kabeli barqaror ulanganligiga ishonch hosil qiling. Yangilash tugallangach, displey quyidagi rasmdagi kabi ko'rinadi:

Dongle mikrodasturini yangilash

open receiver software: Customer_GDF-G760326_8DC9_V10_250213a.exe as shown in Figure (A), insert the receiver intothe usb port of the PC, and hold down the receiver “Docking key” for 5 seconds. The receiver enters the upgrade mode and”OFFLINE” turns red and green as shown in Figure B, Click “Update mode” to upgrade the receiver software successfully.

GameMacro ilovasi

1. GameMacro APP-ni o'rnatish uchun: Mobil telefoningiz yoki planshetingizni oching, QR kodini skanerlash uchun WeChat-dan foydalaning va “GameMacro APP”ni yuklab oling.
2. Telefoningizning Bluetooth roʻyxatidan GameMacro bilan bogʻliq Bluetooth nomini toping va juftlikka ulaning.
3. Ilovaga kirganingizdan so'ng, yuqori chap burchakdagi "+" belgisini bosing, Bluetooth tizimi orqali hozirgina ulangan kontrollerni tanlang va ulanishni yakunlang.
4. Qayta ulanish uchun telefonning Bluetooth tizimi va kontroller allaqachon ulanganligiga ishonch hosil qiling. Qayta ulanish uchun tarix ro'yxatidan avval ulangan qurilmani tanlashingiz mumkin.
5. Agar biron-bir sababga ko'ra ulanish muvaffaqiyatsiz bo'lsa, ekranda tekshirgichning muammolarni bartaraf etish sahifasi ochiladi. Yoki yuqori o'ng burchakni bosishingiz mumkin view solutions to frequently asked questions(FAQs). (The solutions will be further improved based on the controller type at a later stage.)

Nazoratchi tafsilotlari

1. The button test in the controller details section is a physical button test. Pressing the controller buttons allows you to test if the controller is functioning properly. (The button values displayed on the page will vary depending on the actual button values of the controller.)
2. The following are the calibration procedures for the gyroscope, joystick and trigger. Complete eachcalibration within 60 seconds as per the instructions
3. Firmware version and download installation. After downloading a new firmware version, you canalso revert to the old version without affecting the use of the app
4. Macro mode and contact mode. Mode switching can be done not only through the combination keys (the switching combination key method needs to be completed according to thecontroller’s manual), but also through the app. Different modes have different pages and different usage scenarios.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more ofthe following measures:

• Qabul qiluvchi antennaning yo'nalishini o'zgartiring yoki o'zgartiring.
• Uskuna va qabul qilgich orasidagi masofani oshiring.
• Uskunani qabul qilgich ulanganidan farqli zanjirdagi rozetkaga ulang.
• Yordam uchun diler yoki tajribali radio/televidenie bo'yicha mutaxassis bilan maslahatlashing.

Caution: Any changes or modifications to this device not explicitly the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:

1. Ushbu qurilma zararli shovqinlarga olib kelmasligi mumkin va
2. This device must accept any interference received, including interference that may cause undesired operation.The device has been evaluated to meet general RF exposure requirements

Tez-tez so'raladigan savollar

• Savol: Kompyuterimda X_INPUT, D_INPUT va NS rejimlari o‘rtasida qanday o‘tish mumkin?
  • A: Press and hold the +/- buttons for 3 seconds to switch modes.

Hujjatlar / manbalar

CHT SP1133 simsiz boshqaruvchi [pdf] Foydalanuvchi qo‘llanmasi BHV8-1133, 2BHV81133, 1133, SP1133 simsiz boshqaruvchi, SP1133, simsiz boshqaruvchi, boshqaruvchi

Ma'lumotnomalar

• Foydalanuvchi uchun qo'llanma