Cisco PIM uyali ulanishi mumkin bo'lgan interfeys moduli foydalanuvchi qo'llanmasi

Cisco PIM uyali ulanishi mumkin bo'lgan interfeys moduli

Texnik xususiyatlari

• SIM-kartani qulflash va qulfdan chiqarish imkoniyatlarini qo'llab-quvvatlaydi
• Zaxiralash uchun ikkita SIM-kartani qo'llab-quvvatlash
• Tegishli proshivka uchun SIM-kartani avtomatik faollashtirish
• Umumiy quruqlikdagi mobil tarmoq (PLMN) tanlovi
• Xususiy LTE va Private 5G tarmog'ini qo'llab-quvvatlash
• Ikki faol PDN profiles Uyali interfeysda
• IPv6 ma'lumotlar trafigini qo'llab-quvvatlash
• Cisco IOS-XE-da uyali aloqaga xizmat ko'rsatish xususiyatlari

Uyali PIMni sozlash uchun zarur shartlar

Eslatma

You must have the appropriate antennas and antenna accessories to complete your installation. Consult the Cisco Industrial Routers and Industrial Wireless Access Points Antenna Guide for suggestions on possible solutions.

• If the signal is not good at the router, place the antenna away from router in a better coverage area. Please refer to the RSSI/SNR values as displayed through show cellular <x/x/x> all or the LED of the pluggable modem.
• You must have cellular network coverage where your router is physically placed. For a complete list of supported carriers.
• You must subscribe to a service plan with a wireless service provider and obtain a Subscriber Identity Module (SIM) card. Only micro SIMs are supported.
• You must install the SIM card before configuring the Cellular PIM or router.
• The standalone antenna that supports GPS capabilities must be installed for the GPS feature to work when available on the PIM.

Uyali PIMni sozlash uchun cheklovlar

• Currently, cellular networks support only user initiated bearer establishment.
• Due to the shared nature of wireless communications, the experienced throughput varies depending on the radio network capabilities, number of active users or congestion in a given network.
• Cellular bandwidth is asymmetric with the downlink data rate being greater than the uplink data rate, while on private cellular with TDD frequency band(s), it may be symmetrical.
• Cellular networks have higher latency compared to wired networks. Radio latency rates depend on the technology and carrier. Latency also depends on the signal conditions and can be higher because ofnetwork congestion.
• CDMA-EVDO, CDMA-1xRTT, and GPRS technology modes are not supported. 2G is only supported on the P-LTE-GB.
• Any restrictions that are part of the terms of service from your carrier.
• SMS—Only one text message up to 160 characters to one recipient at a time is supported. Larger texts are automatically truncated to the proper size before being sent.

Xususiyatlar qo'llab-quvvatlanmaydi

The following features are not supported:

• On Cisco IOS-XE, TTY support or Line is not available on cellular interface as it was on IOS classic.
• On Cisco IOS-XE, explicit Chat script /Dialer string doesn’t need to be configured for the cellular interface as it was on IOS classic.
• DM log output to USB flash is not supported
• Ovoz xizmatlari

Uyali PIMning asosiy xususiyatlari

The PIM supports the following major features:

TSS

• Savol: Cisco Cellular Pluggable Interface moduli bilan har qanday turdagi antennalardan foydalanishim mumkinmi?
  • A: No, it is recommended to use antennas and accessories specified in the Cisco Industrial Routers and Industrial Wireless Access Points Antenna Guide for compatibility and performance.
• Savol: Qancha PDN profiles Uyali interfeysda faol bo'lishi mumkinmi?
  • Javob: Ikkitagacha PDN profiles can be active on the Cellular interface, depending on the SIM subscription and services.