M5Stack C6LoRA Module User Manual

M5Stamp C6LORA
Model: Stamp C6LoRA
Foydalanuvchi uchun qo'llanma

Tavsif

Stamp C6LoRa is a high-performance programmable LoRa module designed for the 830 ~ 930 MHz frequency range. The module features an ESP32-C6 SoC, an SX1262 LoRa RF transceiver, and an LNA signal amplifier chip. It comes with two onboard IPEX antenna connectors for external Wi-Fi and LoRa antennas, respectively.
At its core, the ESP32-C6 integrates a rich set of peripheral interfaces, enabling extended functionality through secondary development. It also supports 2.4GHz Wi-Fi 6, offering broader possibilities for IoT applications. Additionally, the module includes a  PI4IOE5V6408 IO expander chip, which is used for LoRa transceiver circuit control and amplifier enable signal management, delivering enhanced power efficiency and providing additional usable IO resources.
A built-in DC-DC converter supports a DC input range of 3.7 to 5V and allows for lithium battery power, making it adaptable to various hardware deployment scenarios. The module is well-suited for long-range communication applications such as smart irrigation, remote metering, and power equipment control.

Texnik xususiyatlari

Tez boshlash

3.1 Tayyorlash

1. Rasmiy Arduino-ga tashrif buyuring websaytga o'ting va Arduino IDE ni o'rnating
   https://www.arduino.cc/en/Main/Software
2. Quyidagi boshqaruv menejerini qo'shing URL uchun File → Afzalliklar → Qo'shimcha forumlar menejeri URLs:
   https://espressif.github.io/arduino-esp32/package_esp32_dev_index.json
3. Boards Manager-ni oching, “ESP32” ni qidiring va oʻrnatish tugmasini bosing.
4. After installation, select the board “ESP32C6 Dev Module.”
5. Configure the following options. USB CDC On Boot: “Enabled”

3.2 Wi-Fi Test
Sobiqni tanlangampDasturda “Examples” → “WiFi” → “WiFiScan” ni tanlang, qurilmangizga mos keladigan portni tanlang va yuqori chap burchakdagi kompilyatsiya qilish va yuklash tugmasini bosing.
Yuklash tugagandan so'ng, Serial Monitorni oching view Wi-Fi skanerlash ma'lumotlari.

3.3 BLE skanerlash
Sobiqni tanlangampDasturda “Examples” → “BLE” → “Scan” tugmasini bosing, qurilmangizga mos keladigan portni tanlang va yuqori chap burchakdagi kompilyatsiya qilish va yuklash tugmasini bosing.
Yuklash tugagandan so'ng, Serial Monitorni oching view BLE skanerlash ma'lumotlari.

3.4 LoRa TX
After burning the LoRa test firmware, check the LoRa transceiver information via the ESP32-C6 USB CDC serial port.

FCC ogohlantirishi

FCC ogohlantirishi:
Muvofiqlik uchun mas'ul tomon tomonidan aniq tasdiqlanmagan har qanday o'zgartirishlar yoki modifikatsiyalar foydalanuvchining uskunani ishlatish huquqini bekor qilishi mumkin.
Ushbu qurilma FCC qoidalarining 15-qismiga mos keladi. Ishlash quyidagi ikkita shartga bo'ysunadi: (1) Ushbu qurilma zararli shovqinlarni keltirib chiqarmasligi mumkin va (2) ushbu qurilma qabul qilingan har qanday shovqinni, jumladan, kiruvchi ishlashga olib keladigan shovqinni ham qabul qilishi kerak.

MUHIM QAYD:
Eslatma: Ushbu uskuna sinovdan o'tkazildi va FCC qoidalarining 15-qismiga muvofiq, B sinfidagi raqamli qurilma uchun cheklovlarga mos kelishi aniqlandi. Bu chegaralar turar joyni o'rnatishda zararli shovqinlardan oqilona himoya qilish uchun mo'ljallangan. Ushbu uskuna radiochastota energiyasini ishlab chiqaradi, ishlatadi va nurlantirishi mumkin va agar ko'rsatmalarga muvofiq o'rnatilmasa va ishlatilmasa, radioaloqa uchun zararli shovqinlarni keltirib chiqarishi mumkin. Biroq, ma'lum bir o'rnatishda shovqin paydo bo'lmasligiga kafolat yo'q. Agar ushbu uskuna radio yoki televizorni qabul qilishda zararli shovqinlarni keltirib chiqarsa, buni uskunani oʻchirish va yoqish orqali aniqlash mumkin boʻlsa, foydalanuvchi quyidagi choralardan biri yoki bir nechtasi bilan shovqinni tuzatishga harakat qilishi tavsiya etiladi:

• Qabul qiluvchi antennaning yo'nalishini o'zgartiring yoki o'zgartiring.
• Uskuna va qabul qilgich orasidagi masofani oshiring.
• Uskunani qabul qilgich ulanganidan farqli zanjirdagi rozetkaga ulang.
• Yordam uchun diler yoki tajribali radio/televidenie bo'yicha mutaxassis bilan maslahatlashing.

FCC radiatsiyaviy ta'sir qilish to'g'risidagi bayonot: Bu uskuna nazoratsiz muhit uchun belgilangan FCC nurlanish ta'sir chegaralariga mos keladi.

Muhim eslatma:
Agar ushbu shartlar bajarilmasa (masalanample, certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid, and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

Yakuniy mahsulotni yorliqlash
The final end product must be labeled in a visible area with the following “Contains FCC ID: 2AN3WM5STAMPC6LORA”.

Yakuniy foydalanuvchi uchun qo'lda ma'lumot
OEM integratori oxirgi foydalanuvchiga ushbu modulni birlashtirgan oxirgi mahsulotning foydalanuvchi qo'llanmasida ushbu RF modulini qanday o'rnatish yoki olib tashlash haqida ma'lumot bermasligini bilishi kerak.
Yakuniy foydalanuvchi qo'llanmasi ushbu qo'llanmada ko'rsatilganidek, barcha talab qilinadigan tartibga soluvchi ma'lumotlarni/ogohlantirishlarni o'z ichiga olishi kerak.

KDB 996369 D03 OEM Manual v01 ga muvofiq asosiy mahsulot ishlab chiqaruvchilari uchun integratsiya ko'rsatmalari

2.2 Amaldagi FCC qoidalari ro'yxati
CFR 47 FCC 15-QISM C KICHIK QISM tekshirildi. Bu modulli transmitter uchun amal qiladi.

2.3 Maxsus operatsion foydalanish shartlari
Bu modul mustaqil modul hisoblanadi. Agar yakuniy mahsulot bir vaqtning o'zida bir nechta uzatish shartlarini yoki xostdagi mustaqil modulli transmitter uchun turli ish sharoitlarini o'z ichiga olsa, xost ishlab chiqaruvchisi oxirgi tizimda o'rnatish usuli uchun modul ishlab chiqaruvchisi bilan maslahatlashishi kerak.

2.4 Cheklangan modul protseduralari
Qo'llanilmaydigan, qo'llab bo'lmaydigan

2.5 Antennani izlash
Qo'llanilmaydigan, qo'llab bo'lmaydigan

2.6 RF ta'siriga oid fikrlar
The device has been evaluated to meet the general RF exposure requirements. The device can be used in mobile or fixed exposure conditions with a minimum distance of 20 cm between the radiator & user’s body.

2.7 Antennalar
This radio transmitter has been approved by the Federal Communications Commission to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

2.8 Yorliq va muvofiqlik ma'lumotlari
The final end product must be labeled in a visible area with the following “Contains FCC ID: 2AN3WM5STAMPC6LORA”.

2.9 Sinov rejimlari va qo'shimcha sinov talablari haqida ma'lumot
The host manufacturer that installs this module with limited modular approval should perform the test of radiated emission and spurious emission according to FCC part 15C:15.247 and 15.209 requirement, only if the test result complies with FCC part 15.247 and 15.209 requirements, then the host can be sold legally.

KDB 996369 D03 ga muvofiq asosiy mahsulot ishlab chiqaruvchilari uchun integratsiya ko'rsatmalari OEM qo'llanma v01

2.10 Qo'shimcha sinovlar, 15-qism B kichik bo'lim rad etish
This transmitter module is tested as a subsystem, and its certification does not cover the FCC Part 15 Subpart B (unintentional radiator) rule requirement applicable to the final host. The final host will still need to be reassessed for compliance to this portion of the rule requirements if applicable.

2.11 EMI mulohazalariga e'tibor bering
We recommend using “best practice” RF design engineering, testing, and evaluation in case non-linear interactions generate additional non-compliant limits due to module placement to host components or properties. The host manufacturer is responsible for ensuring compliance with the applicable FCC rules for the transmitters operating individually and simultaneously. This includes compliance for the summation of all emissions from all outputs occupying the same or overlapping frequency ranges, as defined by the applicable rules.

2.12 Qanday o'zgartirishlar kiritish kerak - Muhim eslatma
Agar ushbu shartlar bajarilmasa (masalanample, certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid, and the FCC ID cannot be used on the final product. In these circumstances, OEM integrator contacts Grantees to make permissive changes, or the OEM integrator will be responsible for reevaluating the end product (including the transmitter) and obtaining a separate FCC authorization.

Yuqoridagi barcha shartlar bajarilgan ekan, transmitterning keyingi sinovlari talab qilinmaydi. Biroq, OEM integratori o'rnatilgan ushbu modul bilan talab qilinadigan har qanday qo'shimcha muvofiqlik talablari uchun yakuniy mahsulotini sinab ko'rish uchun javobgardir.