PROSLAT CORE asboblar qutilarini o'rnatish bo'yicha qo'llanma

PROSLAT CORE asboblar qutilari

Solutions Murales PROSLAT inc. 5559, Avenyu Pierre-Danseau Salaberry-de-Valleyfield (QC) J6S 0M1 Kanada
Kelajakda foydalanish uchun ushbu qo'llanmani saqlang.

RAHMAT
Ushbu mahsulotni xarid qilish orqali Proslatga bildirgan ishonchingiz va ishonchingizni qadrlaymiz. Tashrif buyuring www.proslat.com uy saqlash ehtiyojlari uchun mavjud mahsulotlar to'liq qatorni ko'rish uchun. Proslatni tanlaganingiz uchun tashakkur!

Xavfsizlik ma'lumotlari

TEAM LIFT
Ortiqcha vazn tufayli o'rnatish uchun 2 kishi tavsiya etiladi. Buni qilmaslik mahsulotning shikastlanishiga yoki orqa yoki boshqa jarohatlarga olib kelishi mumkin.

WEIGHT CAPACITY & SAFETY

• HECH QACHON bolalarning tortmalarda, eshiklarda yoki javonlarda turishiga, ko‘tarilishiga yoki osilishiga ruxsat bermang.
• Ushbu mahsulotni ko'chirishdan oldin eshiklar va tortmalarni yoping va qulflang.
• Ushbu mahsulotni o'zgartirmang.
• Mahsulotni tekis yuzalarda saqlang.
• Each drawer supports up to 400 lbs. For stability, distribute weight across multiple drawers.
• Avoid placing over 100 lbs in the top drawer alone, as this may cause tipping.
• If heavier top loading is required (e.g., 200 lbs+), install counterweights at the base for added safety (sold separately).

Og'irlik sig'imi

Oldindan o'rnatish

TALAB QILADIGAN ASBOBLAR

Uskunalar ro'yxati

Paket	Tavsif	Rasm / Rasm
SLPACK14CR-PK-01	Core Hardware Pack Base Black
SLPACK15CR-PK-02	Core Hardware Pack Base Zinc
SLPACK16CR-PK-03	Core Hardware Pack TOP Black

Paket Paquet	Tavsif	Rasm / Rasm
SLPACK17CR-PK-04	Core Hardware Pack TOP Zinc
SLPACK18CR-PK-05	Core Hardware Pack Tall Black
SLPACK19CR-PK-06	Core Hardware Pack Tall Black

G'amxo'rlik va tozalash

• Faqat ichki makonda foydalanish
• Bir tekislangan yuzada saqlang.
• Ushbu kitobchaning 2-sahifasida keltirilgan vazn ko'rsatkichlariga rioya qiling.
• Check all the screws and nuts periodically for tightness.
• Regularly clean the surfaces with a soft rag and water

Yig'ish bo'yicha ko'rsatmalar

1. Shkaflarni olib tashlash (keyingi bosqichlar uchun talab qilinadi)
   • Tortmani oching
   • Push down on the plastic triggers of the slide on both sides to release the drawer.
   • Slightly lift the drawer upwards, then pull it out completely.
     OGOHLANTIRISH: Ushbu qadam uchun ikki kishi tavsiya etiladi.Re-install the drawers
   • Align the drawer’s slide tracks with the rails on the inside of the cabinet
   • Gently close the drawer completely to pass the stopper
   • Open the drawer again and re-engage the slide triggers by pushing them up to lock them in place
2. Connect base modules
   • To connect modules together there are provided bolts to connect them on the insides. Then we have connectors that are installed on the outside of the two modules on the frame, with provided screws.Poydevorlarga g'ildiraklarni o'rnating.
   • Shkafni bo'shating, kartonni erga qo'ying va shkafni orqa tomoniga yoki teskarisiga qo'ying.
   • Using the provided L brackets, place them inside the toolbox in all 4 corners, and install the casters on the bottom of the toolbox using the provided hardware.
3. Install base plates
   • Install the 2 base plates on the inside of locker modules at the bottom (hides the interior hardware) should set into place without hardware.
4. Install work surfaces
   • For Maple wood or stainless steel work surfaces, use the provided hardware in all 4 corners to install
   • Rubber mat does not need to be screwed in, push the 4 corners down to secure.
5. Install side push handles with provided hardware
   • First, mount one of the bracket with the provided hardware
   • Second, align the push rod inner teeth with mounting bracket.
   • Third, align the mounting bracket with the rod and mount it with provided hardware.
6. Adjust the magnets strength on the drawers
   • Take off the drawer
   • Use screw driver and wrench by considering tightening the screw reduce the magnet force
7. TOP BOX INSTALL
   • Place the Top Box on top of the Main Box. Align the sides, as well as the front and back edges of both boxes, as precisely as possible.
   • Insert the six provided bolts through the matching holes and secure them by tightening the nuts from inside the Main Box.
8. Re-install your drawers and doors
   • This should be the very last step, if you have a tall 22’’ drawer module make sure to re-install the laptop drawer first.
   • Refer to step 1 to reinstall drawers.
9. Trailer lock option
   • Position your tool chest in the desired location within your trailer and securely lock the wheels to prevent movement. Place the locking catch on the ground and fasten it using the appropriate screws.
   • Using the provided hardware, securely mount the part on both sides of your tool chest.
10. BUMPERLAR
    1. Align the aluminum bumper with the rivet nut located at the corner of the cabinet.\
    2. Use the provided screws to securely attach the bumper to the cabinet.
11. How to Set Your Personal Code
    Even if the dials show different numbers, the factory default code is set to 0-0-0.

HOW TO SET A NEW CODE:

1. Set the dials to the factory default code: 0-0-0.
2. Turn the lock from position “A” (locked) to “B” (open) 90 degrees clockwise
3. While in the open position, press the reset button using a pointed object (like a pin), and set your desired code by rotating the dials.
4. Release the pin and return the lock to its original position to complete the code setting.

Kafolat

PROSLAT TOOLBOXES CHEKLANGAN KAFOLAT
Ushbu hujjat Shimoliy Amerikaning istalgan joyidan sotib olingan barcha yangi asboblar qutilari uchun Proslat Cheklangan Kafolati haqida batafsil ma'lumot beradi. Ushbu Cheklangan Kafolat faqat shkafning birinchi chakana xaridoriga tegishli. Proslat o'z asboblar qutilarini sotib olingan kundan boshlab besh (5) yil davomida material yoki ishlov berishdagi nuqsonlarga qarshi kafolatlaydi. Proslat har qanday nuqsonli shkafni bosilgan ko'rsatmalarga muvofiq o'rnatilgan va texnik xizmat ko'rsatgan holda almashtiradi. Cheklangan Kafolat shartlariga muvofiq almashtirilgan har qanday Proslat asboblar qutilari asl xariddan qolgan kafolat muddatini meros qilib oladi. Proslat asboblar qutilari sanoatdagi eng yaxshi kafolat bilan ta'minlangan. Barcha slaydlar va ilgaklar umr bo'yi kafolat bilan ta'minlanadi.

EXCLUSIONS. THE PROSLAT LIMITED WARRANTY

DOES NOT COVER THE FOLLOWING:

• Noto'g'ri o'rnatish yoki noto'g'ri foydalanish yoki suiiste'mol qilish natijasida kelib chiqadigan zarar;
• Namlik tufayli korroziya
• Xudoning harakatlari yoki baxtsiz hodisa tufayli zarar;
• Shkafning haddan tashqari yuklanishi natijasida yuzaga keladigan zarar;
• Kimyoviy o'zaro ta'sir natijasida yuzaga keladigan sirt shikastlanishi;
• Mehnat yoki qo'shimcha materiallarning narxi; va
• Nosoz mahsulotlarni qaytarish uchun etkazib berish narxi.

KAFOLAT CHEKLAMALARI
The above Limited Warranty is the exclusive warranty for Proslat toolboxes. Proslat disclaims all other warranties, express or implied, including any implied warranties or merchantability, fitness for particular purpose or otherwise. If you live in an area where consumer law prohibits this disclaimer, the above Limited Warranty will not extend the time period of any such implied warranty.

FOYDALANISH VA G'amxo'rlik

• Faqat ichki makonda foydalanish.
• Bir tekislangan yuzada saqlang.
• Yo'riqnomada keltirilgan vazn ko'rsatkichlariga rioya qiling.
• Vaqti-vaqti bilan barcha vintlardek va yong'oqlarning mahkamligini tekshiring. Zarur bo'lganda torting.
• Vaqti-vaqti bilan yuzalarni yumshoq latta va suv bilan tozalang.

Cheklangan KAFOLAT XIZMATI OLISH:
Call toll free in Canada and USA: 1-888-691-2944 or email info@proslat.com. You will need your original proof of purchase and photos to illustrate the claimed defect. Retain this manual for future use.

SAVOLLAR, MUAMMOLAR, QISMLARNI YO'QOTISH?
CALL PROSLAT CUSTOMER SERVICE 8 A.M. – 5 P.M., EST, MONDAY – FRIDAY • 1-888-691-2944

Tez-tez so'raladigan savollar

Savol: Agar montaj paytida muammolarga duch kelsam nima qilishim kerak?
A: Please contact our customer service at 1-888-691-2944 for further assistance.